Bimetallic nickel iron zeolitic imidazolate fibers as biosensing platform for neurotransmitter serotonin

2022 ◽  
Author(s):  
Thatchanamoorthy Thenrajan ◽  
Selvasundarsekar Sam Sankar ◽  
Subrata Kundu ◽  
Jeyaraj Wilson
Keyword(s):  
Nickel Iron

A possibility of using nickel concentrate, obtained as a result of hydrometallurgical enrichment of manganese-containing raw materials, at steel alloying

2020 ◽  
Vol 76 (7) ◽  
pp. 709-715
Author(s):  
O. Yu. Kichigina
Keyword(s):  
Raw Materials ◽  
Experimental Studies ◽  
Selective Extraction ◽  
Technological Parameters ◽  
Nickel Iron ◽  
Nickel Recovery ◽  
Nickel Concentrate ◽  
Steel Alloying ◽  
High Degree ◽  
Comprehensive Processing

At production of stainless steel expensive alloying elements, containing nickel, are used. To decrease the steel cost, substitution of nickel during steel alloying process by its oxides is an actual task. Results of analysis of thermodynamic and experimental studies of nickel reducing from its oxide presented, as well as methods of nickel oxide obtaining at manganese bearing complex raw materials enrichment and practice of its application during steel alloying. Technology of comprehensive processing of complex manganese-containing raw materials considered, including leaching and selective extraction out of the solution valuable components: manganese, nickel, iron, cobalt and copper. Based on theoretical and experiment studies, a possibility of substitution of metal nickel by concentrates, obtained as a result of hydrometallurgical enrichment, was confirmed. Optimal technological parameters, ensuring high degree of nickel recovery out of the initial raw materials were determined. It was established, that for direct steel alloying it is reasonable to add into the charge pellets, consisting of nickel concentrate and coke fines, that enables to reach the through nickel recovery at a level of 90%. The proposed method of alloying steel by nickel gives a possibility to decrease considerably steel cost at the expense of application of nickel concentrate, obtained out of tails of hydrometallurgical enrichment of manganese-bearing raw materials, which is much cheaper comparing with the metal nickel.

ALLOY 48

Alloy Digest ◽  
1975 ◽  
Vol 24 (6) ◽  
Keyword(s):  
Iron Alloy ◽  
Heat Treating ◽  
Magnetic Core ◽  
High Permeability ◽  
Nickel Iron ◽  
Core Losses ◽  
Instrument Transformers ◽  
Nickel Iron Alloy ◽  
Shielding Material ◽  
Communication Equipment

Abstract ALLOY 48 is a vacuum-melted, 48% nickel-iron alloy designed for high permeability, and low core losses. It is ideal in applications requiring efficient magnetic core materials, such as audio and instrument transformers, instrument relays, and many other communication equipment devices. It is excellent for rotor and stator laminations, and is also a very effective magnetic shielding material. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-52. Producer or source: Magnetics Specialty Metals Division. See also Alloy Digest Fe-96, April 1992.

NIROMET 46

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy ◽  
Glass Seals

Abstract Niromet 46 is a 46% nickel-iron alloy having low and controlled coefficient of expansion. It is recommended for metal-to-glass seals and terminal bands in vitreous enameled resistors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-39. Producer or source: Wilbur B. Driver Company.

NI-SPAN-C Alloy 902

Alloy Digest ◽  
1968 ◽  
Vol 17 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Cold Work ◽  
Temperature Fluctuations ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Constant Modulus ◽  
Nickel Iron ◽  
Iron Chromium Alloy ◽  
Iron Chromium

Abstract N1-SPAN-C alloy 902 is an age-hardenable, nickel-iron-chromium alloy. Its outstanding characteristic is a controllable thermoelastic coefficient. Proper combination of cold work and thermal treatment can produce an essentially constant modulus of elasticity from -50 F to +150 F. The alloy is especially suitable for many types of precision equipment where elastic members are subject to temperature fluctuations. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-32. Producer or source: Huntington Alloy Products Division, An INCO Company.

INVAR

Alloy Digest ◽  
1964 ◽  
Vol 13 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Temperature Variations ◽  
Nickel Iron ◽  
Dimensional Changes ◽  
Temperature Performance ◽  
Nickel Iron Alloy

Abstract INVAR is a 36% nickel-iron alloy having the lowest coefficient of expansion, recommended for applications requiring no dimensional changes with temperature variations. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-24. Producer or source: Carpenter.

INCO ALLOY 330

Alloy Digest ◽  
1992 ◽  
Vol 41 (5) ◽  
Keyword(s):  
Heat Treatment ◽  
Solid Solution ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
High Temperature Alloy ◽  
Nickel Iron ◽  
Temperature Performance ◽  
Inco Alloy ◽  
Iron Chromium

Abstract INCO ALLOY 330 is a nickel/iron/chromium austenitic alloy, not hardenable by heat treatment. It is a solid solution strengthened high-temperature alloy. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-403. Producer or source: Inco Alloys International Inc..

KOVAR A

Alloy Digest ◽  
1953 ◽  
Vol 2 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
High Resistance ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Cobalt Nickel ◽  
Expansion Curve ◽  
Hard Glass ◽  
Nickel Iron Alloy

Abstract KOVAR A is a cobalt, nickel, iron alloy recommended for sealing into hard glass. Has similar expansion curve as glass, makes firm bond between metal and glass, is easy to machine and form, and has high resistance to thermal shock. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-3. Producer or source: Carborundum Company, Refractories Division.

CARPENTER LOW EXPANSION 39

Alloy Digest ◽  
2004 ◽  
Vol 53 (10) ◽  
Keyword(s):  
Thermal Expansion ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Nickel Iron ◽  
Temperature Ranges ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Nickel Iron Alloy ◽  
Low Rate

Abstract Carpenter Low Expansion 39 alloy is a 39% nickel iron alloy with a low rate of thermal expansion useful to temperature ranges up to 316 deg C (600 deg F). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on joining. Filing Code: FE-132. Producer or source: Carpenter Technology Corporation.

CARPENTER INVAR 36 ALLOY

Alloy Digest ◽  
2004 ◽  
Vol 53 (8) ◽  
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Carbon Steel ◽  
Physical Properties ◽  
Iron Alloy ◽  
Nickel Iron ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Nickel Iron Alloy

Abstract Carpenter Invar 36 alloy is a 36% nickel-iron alloy with a rate of thermal expansion approximately one-tenth that of carbon steel at temperatures up to 204 deg C (400 deg F). This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on low and high temperature performance. Filing Code: FE-131. Producer or source: Carpenter Technology Corporation.

MAGNIFER 36K

Alloy Digest ◽  
1996 ◽  
Vol 45 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Electrical Resistance ◽  
Iron Alloy ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Saturation Induction ◽  
Nickel Iron Alloy

Abstract Magnifer 36K is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 ohm mm2/m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-110. Producer or source: VDM Technologies Corporation.

Sign in / Sign up

Export Citation Format

Share Document