On the mechanism of the influence of medium density on the supersonic core length of an underexpanded jet

2021 ◽  
Author(s):  
Sergey G. Mironov ◽  
Vladimir M. Aniskin ◽  
Anatoly A. Maslov
Keyword(s):  
Medium Density ◽  
Underexpanded Jet ◽  
Core Length ◽  
Supersonic Core Length

scholarly journals Scaling law for supersonic core length in circular and elliptic free jets

2021 ◽  
Vol 33 (5) ◽  
pp. 051707
Author(s):  
Arun Kumar Perumal ◽  
Ethirajan Rathakrishnan
Keyword(s):  
Scaling Law ◽  
Free Jets ◽  
Core Length ◽  
Supersonic Core Length

Influence of nozzle exit geometrical parameters on supersonic jet decay

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Prasanta Kumar Mohanta ◽  
B. T. N. Sridhar ◽  
R. K. Mishra
Keyword(s):  
Aspect Ratio ◽  
Nozzle Exit ◽  
Ambient Air ◽  
Schlieren Image ◽  
Geometrical Parameters ◽  
Image Study ◽  
Aspect Ratios ◽  
Core Length ◽  
Supersonic Core Length ◽  
The Impact

Abstract Experiments and simulations were carried on C-D nozzles with four different exit geometry aspect ratios to investigate the impact of supersonic decay characteristics. Rectangular and elliptical exit geometries were considered for the study with various aspect ratios. Numerical simulations and Schlieren image study were studied and found the agreeable logical physics of decay and spread characteristics. The supersonic core decay was found to be of different length for different exit geometry aspect ratio, though the throat to exit area ratio was kept constant to maintain the same exit Mach number. The impact of nozzle exit aspect ratio geometry was responsible to enhance the mixing of primary flow with ambient air, without requiring a secondary method to increase the mixing characteristics. The higher aspect ratio resulted in better mixing when compared to lower aspect ratio exit geometry, which led to reduction in supersonic core length. The behavior of core length reduction gives the identical signature for both under-expanded and over-expanded cases. The results revealed that higher aspect ratio of the exit geometry produced smaller supersonic core length. The aspect ratio of cross section in divergent section of the nozzle was maintained constant from throat to exit to reduce flow losses.

Effect of flat wall length on decay and shock structure of a supersonic square wall jet

2021 ◽  
pp. 095441002110580
Author(s):  
Venkata Satya Manikanta Tammabathula ◽  
Venkata Sai Krishna Ghanta ◽  
Tharaka Narendra Sridhar Bandla
Keyword(s):  
Supersonic Jet ◽  
Leading Edge ◽  
Shock Structure ◽  
Wall Jet ◽  
Pressure Measurements ◽  
Maximum Enhancement ◽  
Flat Wall ◽  
Decay Behaviour ◽  
Core Length ◽  
Supersonic Core Length

Experiments were conducted to find the effect of wall length on the decay behaviour and shock structure of a supersonic wall jet issuing from c-d nozzle of the square-shaped exit. A straight flat wall of width same as the side length of the square was attached to the lip of the nozzle such that the leading edge of the wall and the side of the square aligned properly which allowed the supersonic jet to graze past the flat wall. Experiments were conducted with five different wall lengths, that is, [Formula: see text] = 0.5, 1, 2, 4 and 8. Wall pressure measurements were made from leading edge to the trailing edge of the wall along its centreline. Schlieren flow visualization of the jet flow over the wall for the different wall lengths revealed the shock pattern and the effect of the wall length on the shock structure. The shock structure and jet deflection were significantly affected due to the presence of the wall. There was an upward jet deflection for [Formula: see text] up to [Formula: see text] whereas a downward jet deflection was observed for [Formula: see text]. Noticeable changes in the shock structure were observed for the wall lengths up to 2 D h. The wall length also significantly affected the jet decay characteristics and supersonic core length. Maximum enhancement in jet decay and maximum reduction in supersonic core length resulted when the wall length was [Formula: see text]. However, when the wall length was increased to [Formula: see text], there was a significant reduction in jet decay and a recovery of [Formula: see text]. Presence of wall always resulted a reduction in Lsc irrespective of wall length. The wall effect was to induce a more precipitous pressure drop closer to the nozzle exit, and a more gradual drop farther from it for [Formula: see text] > [Formula: see text].

Axial flow development characteristics of circular and triangular supersonic jets in the presence of an annular coflow at large separation distance

2019 ◽  
Vol 234 (3) ◽  
pp. 804-817
Author(s):  
A Sureshkumar ◽  
BTN Sridhar
Keyword(s):  
Experimental Studies ◽  
Axial Flow ◽  
Separation Distance ◽  
Wave System ◽  
Operational Conditions ◽  
The Core ◽  
Core Length ◽  
Supersonic Core Length ◽  
Jet Shapes ◽  
Two Jets

Experimental studies were conducted to assess the effect of an annular coflow which surrounded a supersonic core jet in a coaxial jet system. Two different core jet shapes were employed which were circular and equilateral triangular. The core jets were maintained at two different total pressures, i.e. 360 and 550 kPa which corresponded to overexpansion conditions. The effect of coflow which surrounded core jet at a distance larger than the core jet diameter was such that the supersonic core length of the core jet was reduced in contrast to the elongation which was reported by earlier researchers for closer distances between the two jets. The Schlieren images of the coaxial jet system had shown that the region between the jet boundary of core jet and inner boundary of the annular coflow had a strong interaction with core jet which was characterised by a wave system and vortices. This region caused a reduction in supersonic core length and weakening of shock structure in the core jet. These findings have been corroborated by total pressure measurements along the core jet centreline. For the same operational conditions, the coflow caused reduction in supersonic core length more for triangular core jet when compared to that for circular core jet.

Influence of nozzle exit geometrical parameters on supersonic jet decay

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Prasanta Kumar Mohanta ◽  
B. T. N. Sridhar ◽  
R. K. Mishra
Keyword(s):  
Aspect Ratio ◽  
Nozzle Exit ◽  
Ambient Air ◽  
Schlieren Image ◽  
Geometrical Parameters ◽  
Image Study ◽  
Aspect Ratios ◽  
Core Length ◽  
Supersonic Core Length ◽  
The Impact

Abstract Experiments and simulations were carried on C-D nozzles with four different exit geometry aspect ratios to investigate the impact of supersonic decay characteristics. Rectangular and elliptical exit geometries were considered for the study with various aspect ratios. Numerical simulations and Schlieren image study were studied and found the agreeable logical physics of decay and spread characteristics. The supersonic core decay was found to be of different length for different exit geometry aspect ratio, though the throat to exit area ratio was kept constant to maintain the same exit Mach number. The impact of nozzle exit aspect ratio geometry was responsible to enhance the mixing of primary flow with ambient air, without requiring a secondary method to increase the mixing characteristics. The higher aspect ratio resulted in better mixing when compared to lower aspect ratio exit geometry, which led to reduction in supersonic core length. The behavior of core length reduction gives the identical signature for both under-expanded and over-expanded cases. The results revealed that higher aspect ratio of the exit geometry produced smaller supersonic core length. The aspect ratio of cross section in divergent section of the nozzle was maintained constant from throat to exit to reduce flow losses.

Study of Decay Characteristics of Hexagonal and Square Supersonic Jet

2017 ◽  
Vol 34 (2) ◽  
Author(s):  
Prasanta Kumar Mohanta ◽  
B. T. N. Sridhar
Keyword(s):  
Pressure Ratio ◽  
Supersonic Jet ◽  
Ambient Air ◽  
Hydraulic Diameter ◽  
Schlieren Image ◽  
Image Study ◽  
Jet Mixing ◽  
Core Length ◽  
Supersonic Core Length ◽  
The Impact

AbstractExperiments were carried on nozzles with different exit geometry to study their impact on supersonic core length. Circular, hexagonal, and square exit geometries were considered for the study. Numerical simulations and schlieren image study were performed. The supersonic core decay was found to be of different length for different exit geometries, though the throat to exit area ratio was kept constant. The impact of nozzle exit geometry is to enhance the mixing of primary flow with ambient air, without requiring tab, wire or secondary method to increase the mixing characteristics. The non-circular mixing is faster comparative to circular geometry, which leads to reduction in supersonic core length. The results depict that shorter the hydraulic diameter, the jet mixing is faster. To avoid the losses in divergent section, the cross section of throat was maintained at same geometry as the exit geometry. Investigation shows that the supersonic core region is dependent on the hydraulic diameter and the diagonal. In addition, it has been observed that number of shock cells remain the same irrespective of exit geometry shape for the given nozzle pressure ratio.

scholarly journals Decay of supersonic rectangular jet issuing from a nozzle with diagonal expansion ramps

2019 ◽  
Vol 23 (6 Part B) ◽  
pp. 3929-3940 ◽  
Author(s):  
Surendra Bogadi ◽  
B.T.N. Sridhar
Keyword(s):  
Reynolds Number ◽  
Aspect Ratio ◽  
Total Pressure ◽  
Internal Surface ◽  
Mixing Rate ◽  
Numerical Studies ◽  
Rectangular Jet ◽  
Core Length ◽  
Supersonic Core Length ◽  
Length Reduction

This paper addresses the effect of expansion ramps on the decay characteristics of a controlled supersonic rectangular jet. A Mach 1.8 rectangular jet issuing from a converging-diverging nozzle of aspect ratio 2 and Reynolds number 1.861?105 is considered as the base model for the study. Two separate nozzle models with expansion ramps placed at the diagonal ends on major and on the minor internal surface are considered for the present study. The diagonal placements of ramps induce additional vortices near the nozzle exit apart from the corner vortices emanating from the rectangular corners. Experimental and computational investigations at different expansion levels are carried to prove the enhanced mixing rate due to the induced vortex. The ramps on the minor side caused maximum supersonic core length reduction of 44% at an inlet total pressure of 4 bar and a minimum of 27% at an inlet total pressure of 8 bar. The maximum and minimum core length reductions caused by the ramps placed on the major side are 22% and 11% at inlet total pressures 6 and 8 bar respectively. Both experimental and numerical studies show that shock waves are rendered weak by the minor side placement of ramps at all expansion levels.

scholarly journals Study of decay characteristics of rectangular and elliptical supersonic jets

2017 ◽  
Vol 21 (6 Part B) ◽  
pp. 3001-3010 ◽  
Author(s):  
Prasanta Mohanta ◽  
B.T.N. Sridhar
Keyword(s):  
Total Pressure ◽  
Empirical Relation ◽  
Ambient Air ◽  
Supersonic Jets ◽  
Schlieren Image ◽  
Pressure Data ◽  
Image Study ◽  
Core Length ◽  
Circular Jets ◽  
Supersonic Core Length

Experiments were carried out to study the decay characteristics of non-circular supersonic jets issued from rectangular and elliptical nozzles, and results were compared with circular case. Numerical simulations and Schlieren image study were carried out to validate the experimental results obtained from total pressure data. The supersonic core lengths of the jets were found to be different for different exit shaped geometries and area ratio for those nozzles was same. To avoid the losses in divergent section, the shape of cross-section of throat was maintained same that of as the exit. The exit shape geometry played the important role to enhance the mixing of the jet with ambient air, without requiring secondary method to increase the mixing characteristics. The mixing with ambient air in case of non-circular jets was more intense when compared to that of circular jets, which resulted in reduction of supersonic core length. The behavior of supersonic core length had identical signature for both under-expanded and over-expanded operation. The supersonic core length was characterized by exit shape factor. In literature, the supersonic jet characterization and the related experimental correlation are available for optimum expansion conditions whereas for other expansion (under and over) conditions the experimental correlations are barely available. While investigating experimentally, a new empirical relation was obtained which was the improved form of earlier correlations for supersonic core length. The current results obtained from three different methods (total pressure data, schlieren image and numerical simulation) had shown the reasonable agreement with the experimentally obtained relation.

Sign in / Sign up

Export Citation Format

Share Document