Experimental mechanical strength and deformation characteristics of deep damaged–fractured rock

Author(s):  
Qing-Bin Meng ◽  
Jiang-Feng Liu ◽  
Li-Xiang Xie ◽  
Hai Pu ◽  
Yu-Gui Yang ◽  
...  
1993 ◽  
Vol 34 (5) ◽  
pp. 233-244 ◽  
Author(s):  
Takayasu HOSONO ◽  
Masayuki NAKAJIMA ◽  
Kazuhiro KOIZUMI ◽  
Nobutaka SUGITA ◽  
Shohji OGAWA

2019 ◽  
Vol 92 ◽  
pp. 05008
Author(s):  
Zain Maqsood ◽  
Junichi Koseki ◽  
Hiroyuki Kyokawa

It has been unanimously acknowledged that the strength and deformation characteristics of bounded geomaterials, viz. cemented soils and natural rocks, are predominantly governed by the rate of loading/deformation. Rational evaluation of these time-dependent characteristics due to viscosity and ageing are vital for the reliable constitutive modelling. In order to study the effects of ageing and loading/strain rate (viscosity) on the behaviour of bounded geomaterials, a number of unconfined monotonic loading tests were performed on Gypsum Mixed Sand (GMS) specimens at a wide range of axial strain rates; ranging from 1.9E-05 to 5.3E+00 %/min (27,000 folds), and at different curing periods. The results indicate shifts in the viscous behaviour of GMS at critical strain rates of 2.0E-03 and 5.0E-01 %/min. In the light of this finding, the results are categorized into three discrete zones of strain rates, and the behaviour of GMS in each of these zones is discussed. A significant dependency of peak strength and stress-strain responses on strain rate was witnessed for specimens subjected to strain rates lesser than 2.0E-03 %/min, and the effects of viscosity/strain rate was found to be insignificant at strain rate higher than 5.0E-01%/min.


2019 ◽  
Vol 97 ◽  
pp. 02034
Author(s):  
Evgenij Borisyuk

Rebar fixators of various types (plastic and concrete) became widespread with manufacturing of building structures of precast and monolithic reinforced concrete in order to fix steel reinforcement cage in strictly design position and to exclude the probability of its displacement during concreting. Such sufficiently rigid fixing is necessary for the following reliable operation of the structure in the building, as well as for the preservation of steel reinforcement which protected by a necessary layer of concrete from corrosion. Information available in the literature does not allow us to judge about the effects that different types of fixators apply to exploitative properties (such as strength and crack resistance) of reinforced concrete. The experiments, according to the accepted method, showed that these characteristics are slightly worse for the samples with plastic fixators and fixators made of low grade concrete than for the samples without fixators or fixators made of high grade concrete. On the base on the research results it becomes possible to substantiate the distinction between the areas of application of plastic and concrete fixatives


Sign in / Sign up

Export Citation Format

Share Document