Solute diffusion into cell walls in solution-impregnated wood under conditioning process I: effect of relative humidity on solute diffusivity

2015 ◽  
Vol 61 (6) ◽  
pp. 543-551 ◽  
Author(s):  
Soichi Tanaka ◽  
Masako Seki ◽  
Tsunehisa Miki ◽  
Ichinori Shigematsu ◽  
Kozo Kanayama
2016 ◽  
Vol 62 (2) ◽  
pp. 146-155 ◽  
Author(s):  
Soichi Tanaka ◽  
Masako Seki ◽  
Tsunehisa Miki ◽  
Ichinori Shigematsu ◽  
Kozo Kanayama

2016 ◽  
Vol 65 (5) ◽  
pp. 359-364 ◽  
Author(s):  
Soichi TANAKA ◽  
Masako SEKI ◽  
Tsunehisa MIKI ◽  
Ichinori SHIGEMATSU ◽  
Kenji UMEMURA ◽  
...  

2018 ◽  
Vol 67 (8) ◽  
pp. 767-772
Author(s):  
Soichi TANAKA ◽  
Hideaki SUGINO ◽  
Masako SEKI ◽  
Tsunehisa MIKI ◽  
Kenji UMEMURA ◽  
...  

The cell walls of a number of marine algae, namely species of Bryopsis, Caulerpa, Udotea, Halimeda and Penicillus and of one freshwater alga, Dichotomosiphon , are examined using both chemical and physical techniques. It is shown that, with the possible exception of Bryopsis , cellulose is completely absent and that the walls contain instead β -l,3-linked xylan as the structural polysaccharide. Bryopsis contains, in addition, a glucan which is most abundant in the outer layers of the wall and which stains like cellulose. The xylan is microfibrillar but the microfibrils are more strongly adherent than they are in cellulose, and in some species appear in the electron microscope to be joined by short crossed rod-like bodies. The orientation of the microfibrils is found to vary, ranging from a net tendency to transverse orientation through complete randomness to almost perfect longitudinal alinement. The microfibrils are negatively birefringent, so that all walls seen in optical section, and all parallel arrays of microfibrils whether in face view or in section (except strictly transverse section) are negatively birefringent. With Bryopsis , the negative birefringence in face view is overcompensated by the positive birefringence of the incrusting glucan so that the true birefringence of the crystalline polysaccharide is observed only after the glucan is removed. The X-ray diagram of parallel arrays of microfibrils as found, for instance, in Penicillus dumetosus shows that the xylan chains are helically coiled, in harmony with the negative birefringence. It is deduced that the microfibrils consist of hexagonally packed, double-stranded helices. The diameter of the helices increases with increasing relative humidity, as water is taken into the lattice, from 13.7 Å in material dried over phosphorus pentoxide to a maximum of 1.54 Å at 65 % relative humidity when the xylan contains 30 % of its weight as water. The repeat distance along the helix axis ranges from 5.85 Å (dry) to 6.06 Å (wet), the length of a half turn of each helix containing three xylose residues. The incrusting substances in these walls often include a glucan which is said also to be 1,3-linked. The significance of the extensive differences between this xylan and cellulose are examined both as regards some of the physical properties of the respective cell walls and in relation to the taxonomic position of these plants.


2019 ◽  
Vol 9 (16) ◽  
pp. 3237
Author(s):  
Mingzhen Cai ◽  
Zongying Fu ◽  
Yingchun Cai ◽  
Yue Zhang

The impregnation of poplar wood (Populus adenopoda Maxim) with 1,3-dimethylol-4,5-dihydroxyethyleneurea and maltodextrin and the effects of ZnCl2 and curing at 103 °C and 120 °C on the fixation rate and the leaching resistance of modified samples were investigated (103 °C curing, ZnCl2 + 103 °C curing, 120 °C curing, and ZnCl2 + 120 °C curing are denoted as 103, ZC-103, 120, and ZC-120, respectively), with the aim of improving the modification effect. The results showed that ZC-103 had the highest fixation rate, and its weight leaching ratio was higher than that of 120. Fourier-transform infrared spectroscopy showed that ZnCl2 did not affect the functional groups of the modified chemicals. The flexural strength and modulus and the compressive strength perpendicular to the grain were highest for ZC-103. In summary, ZC-103 exhibited the highest fixation rate, indicating that the hardener ZnCl2 bridged and increased the interfacial properties between the chemicals and cell walls and therefore increased the potential for macromolecule polycondensation between the chemicals and cell wall materials. This research paves the way for improving the fixation rate of impregnated wood and provides new insights into practical applications.


Holzforschung ◽  
2010 ◽  
Vol 64 (5) ◽  
Author(s):  
Gunthard Scholz ◽  
Jan Van den Bulcke ◽  
Matthieu Boone ◽  
Mario Zauer ◽  
Ernst Bäucker ◽  
...  

Abstract The migration and deposition of hot melting wax in wax-treated wood is not described in detail in the literature, although such products are available on the market. In the present study, this topic was investigated based on pine sapwood (Pinus sylvestris L.) and beech (Fagus sylvatica L.). The behavior of three different waxes was studied by means of 2D X-ray measurements and scanning electron microscopy observations. The three waxes did not show distinct differences in their deposition patterns. An intensive wax deposition could be observed within the vessels, tracheids, and fibers. In P. sylvestris the ray tracheids were penetrated with hot melting waxes, therefore there is a lateral wood penetration from the outer to the inner wood. In general, no wax penetration was visible within the parenchyma tissue and epithelium cells. Cracks were detected within the wax deposits as well as secondary microcapillaries, which were visible between the deposits and the cell walls.


Sign in / Sign up

Export Citation Format

Share Document