scholarly journals Root form and canal anatomy of maxillary first premolars: a cone-beam computed tomography study

Odontology ◽  
2021 ◽  
Author(s):  
Katarzyna Olczak ◽  
Halina Pawlicka ◽  
Witold Szymański
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Anatomical Variations ◽  
Apical Part ◽  
Cone Beam ◽  
New Classification ◽  
Wide Range ◽  
Computed Tomography Scanning ◽  
Canal Morphology ◽  
New System

AbstractThe aim of this study was to evaluate the root and canal morphology of permanent maxillary first premolars in a Polish population using cone-beam computed tomography scanning (CBCT) and to compare the classifications by Vertucci and Ahmed et al. Images of 350 maxillary first premolars were analyzed. Scans were obtained from 226 patients: 131 women and 95 men. The root canal configurations were classified according to Vertucci and a new system by Ahmed et al. In addition, the number of roots and the level where roots bifurcated were identified. The results were submitted to statistical analysis. Most maxillary first premolars had two roots (69.1%). Most bifurcations were located in the coronal part of the root (44.2%) and the least in the apical part (15.3%). Bifurcation in the coronal part of the root was observed more often in the teeth of men than women. In turn, bifurcation in the central or apical part was significantly more common in women than in men. The most common canal configuration of the maxillary first premolars was type IV (78.2%) according to Vertucci and 2FPB1P1 (65.4%) according to the new classification. Among the remaining cases, almost all types of canals described by Vertucci, and many combinations of codes given in the new classification were demonstrated. The maxillary first premolars displayed a wide range of root and canal anatomical variations. The new system for classifying canal morphology based on Ahmed et al. is more accurate than the Vertucci classification.

scholarly journals Endodontic Management of a Maxillary First Molar with Two Palatal Canals and a Single Buccal Canal: A Case Report

2012 ◽  
Vol 2012 ◽  
pp. 1-4 ◽  
Author(s):  
Leila Atash biz Yeganeh ◽  
Mamak Adel ◽  
Reza Vahedi ◽  
Maryam Tofangchiha
Keyword(s):  
Computed Tomography ◽  
Treatment Outcome ◽  
Case Report ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Root Canals ◽  
Type Iv ◽  
Maxillary Molars ◽  
Root Canal Morphology ◽  
Canal Morphology

Thorough knowledge of root canal morphology is essential for the endodontic therapy. There are rare variations in canal number and configuration in maxillary molars, which could affect treatment outcome. This paper presents the endodontic management of a maxillary first molar with two palatal canals in one root (Vertucci type IV) and a single buccal canal. In this paper cone-beam computed tomography was made to asses this morphology. This paper is intended to reinforce clinician’s awareness of the rare morphology of root canals.

scholarly journals Use of Cone Beam Computed Tomography to Identify the Morphology of Maxillary and Mandibular Premolars in Chennai Population

2019 ◽  
Vol 22 (1) ◽  
pp. Process
Author(s):  
Rajamohan Rajakeerthi ◽  
Malli Suresh Babu Nivedhitha
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Treatment Success ◽  
Cone Beam ◽  
Type I ◽  
Root Canals ◽  
Computed Tomographic ◽  
Root Canal Anatomy ◽  
Computed Tomography Scanning

Objective: The complex root canal anatomy is inherently colonised by microbial flora. Endodontic treatment success is always related to adequate disinfection of the root canal space, which ultimately affects the treatment outcome. A thorough understanding of the external and internal root canal anatomy by using adequately imaging modalities is essential before planning any treatment. The aim of this study was to investigate the number and morphology of the root canals of maxillary and mandibular premolars in Chennai population. Material and Methods: Full-size cone-beam computed tomographic images were randomly collected from 100 patients, resulting in a total of 200 first and 200 second maxillary premolars as well as 200 first and 200 second mandibular premolars. All the eight premolars were analysed in single patients, who underwent cone-beam computed tomography scanning during pre-operative assessment (before implant surgery, orthodontic treatment, diagnosis of dental-alveolar trauma or difficult root canal treatment). Total number of roots and root canals, frequency and correlations between men and women were recorded and statistically analysed by using chi-square tests. The root canal configurations were rated according to the Vertucci’s classification. Results: In the maxillary first premolar group (n = 200), 36.3% had 1 root, 56.7% had 2 roots and 7.0% had 3 roots, with most exhibiting a type IV canal configuration. In the maxillary second premolar group (n = 200), 60% had 1 root, 29.8% had 2 roots and 10.2% had 3 roots, with the majority of single-rooted second premolars exhibiting a type I canal configuration. In the mandibular first premolar group (n = 200), 80.5% had 1 root, 9.8% had 2 roots and 5% had 3 roots. In the mandibular second premolar group (n=200), 90.1% had 1 root, 6.4% had 2 roots and 3.5 % had 3 roots, with most exhibiting a type I canal configuration. No statistical correlation was found between number of roots, gender and tooth position. Conclusion: This cone-beam computed tomographic study confirmed previous anatomical and morphological investigations. Therefore, the possibility of additional root canals should be considered when treating premolars. Keywords: Cone-beam computed tomography; Mandibular; Maxillary; Premolar; Root canal; Morphology.

scholarly journals Cone beam-computed tomography as an indispensable tool in the management of radiculous premolar: a case report

2016 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
Shristhi Sharma ◽  
Ananth Raghav Sharma ◽  
Vivek Kumar Rai ◽  
Ronak Choudhary
Keyword(s):  
Computed Tomography ◽  
Case Report ◽  
Cone Beam Computed Tomography ◽  
Anatomical Variations ◽  
Endodontic Treatment ◽  
Cone Beam ◽  
Internal Anatomy ◽  
Indispensable Tool ◽  
Rule Out

Background: Internal anatomy of maxillary first premolars is particularly multifaceted on account of the variation in number of roots and canal configuration. Maxillary first premolars with 3 roots are called as small molar or “radiculous” because of their similar anatomy to the maxillary first molars. The most demanding step in endodontic treatment is identification and proper access to pulp canals of certain teeth with atypical canal configurations. Methods of identification of such premolars can be by various aides.Case Presentation: The present case describes the application of Cone Beam-Computed Tomography in the diagnosis of extra root with extra canal in a three rooted maxillary right first premolar.Conclusions: Proper knowledge of the anatomical variations is a must for an endodontist to make a treatment successful. Utilizing the latest technology along with the traditional concepts can surely rule out the inaccuracy in the treatment involved in such cases.

scholarly journals Evaluation of the root and canal morphology of mandibular permanent molars in a south-eastern Turkish population using cone-beam computed tomography

2014 ◽  
Vol 08 (02) ◽  
pp. 154-159 ◽  
Author(s):  
Bilge Gulsum Nur ◽  
Evren Ok ◽  
Mustafa Altunsoy ◽  
Osman Sami Aglarci ◽  
Mehmet Colak ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Turkish Population ◽  
Cone Beam ◽  
Type I ◽  
Second Molar ◽  
Mandibular Molars ◽  
Permanent Molars ◽  
Canal Morphology

ABSTRACT Objective: The aim of this retrospective study was to determine the root and canal morphology of the mandibular first and second permanent molars in a Turkish population using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images of mandibular first (n = 966) and second molar (n = 1165) teeth from 850 Turkish patients were evaluated. The root canal configurations were classified according to the method of Vertucci. The data were analyzed by Pearson's Chi-square test. Results: The majority of mandibular molars were two rooted with three canals; however, three roots were identified in 0.05% of the first molars and 0.01% of the second molars, and 100% of the additional root canals were of type I configuration. Mesial roots had more complex canal systems with more than one canal, whereas most distal roots had a type I configuration. Conclusions: Within the limitations of this study, it can be concluded that CBCT scanning provides supplemental information about the root canal configurations of mandibular molars in a Turkish population. This study may help clinicians in the root canal treatment of mandibular molars.

scholarly journals Evaluation of the Root and Canal Morphology of Maxillary Permanent Molars and the Incidence of the Second Mesiobuccal Root Canal in Greek Population Using Cone-beam Computed Tomography

2015 ◽  
Vol 9 (1) ◽  
pp. 267-272 ◽  
Author(s):  
Georgia E. Nikoloudaki ◽  
Taxiarchis G. Kontogiannis ◽  
Nikolaos P. Kerezoudis
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Greek Population ◽  
Root Canal Treatment ◽  
Cone Beam ◽  
Second Molar ◽  
Root Canals ◽  
Permanent Molars ◽  
Canal Morphology

Objectives: Cone-Beam Computed Tomography is an alternative imaging technique which has been recently introduced in the field of Oral & Maxillofacial Radiology. It has rapidly gained great popularity among clinicians due to its ability to detect lesions and defects of the orofacial region and provide three-dimensional information about them. In the field of Endodontics, CBCT can be a useful tool to reveal tooth morphology irregularities, additional root canals and vertical root fractures. The objective of this study is to evaluate the root and root canal morphology of the maxillary permanent molars in Greek population using Cone-Beam Computed Tomography.Materials and Methods:273 cone-beam computed tomography (CBCT) images were examined. The number of roots and root canals of the first and second maxillary molars were evaluated. Root canal configuration was classified according to Weine’s classification by two independent examiners and statistical analysis was performed.Results:A total of 812 molars (410 first and 402 second ones) were evaluated. The vast majority of both first and second molars had three roots (89.26% and 85.07%, respectively). Most first molars had four canals, while most second molars had three. In the mesiobuccal roots, one foramen was recorded in 80.91% of all teeth. Other rare morphologic variations were also found, such as fusion of a maxillary second molar with a supernumerary tooth.Conclusion:Within the limitations of this study, it can be concluded that more attention should be given to the detection of additional canals during root canal treatment in maxillary permanent molars. Towards this effort, CBCT can provide the clinician with supplemental information about the different root canal configurations for successful Root Canal Treatment.

scholarly journals A cone-beam computed tomography study of the root canal morphology of anterior teeth in a Turkish population

2014 ◽  
Vol 08 (03) ◽  
pp. 302-306 ◽  
Author(s):  
Mustafa Altunsoy ◽  
Evren Ok ◽  
Bilge Gulsum Nur ◽  
Osman Sami Aglarci ◽  
Enes Gungor ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Turkish Population ◽  
Cone Beam ◽  
Chi Square ◽  
Anterior Teeth ◽  
Population Type ◽  
Canal Morphology

ABSTRACT Objective: The aim of this study was to determine the root and canal morphology of the maxillary and mandibular anterior teeth in a Turkish population by analyzing cone-beam computed tomography (CBCT) images. Materials and Methods: CBCT images of 417 females and 410 males with a mean age of ranging from 14 to 70 years were examined in this study. A total of 1453 maxillary central incisors, 1504 maxillary lateral incisors, 1523 maxillary canines, 1582 mandibular central incisors, 1603 mandibular lateral incisors, and 1604 mandibular canines were analyzed. The number of root canals and the canal configurations were investigated and then were classified according to Vertucci's classification. The data were analyzed with the Pearson Chi-square test. Results: The Type 1 canal configuration was most prevalent in the maxillary anterior teeth (96.8-99.7%). The Types 2, 3, 4, and 5 canal configurations were observed within the range of 0-1.3%, 0-0.8%, 0-0.7%, and 0-1.8%, respectively. In the mandibular anterior teeth, the Type 1 canal configuration was most prevalent (77-95%). The Types 2, 3, 4, and 5 canal configurations were observed within a range of 0.2-2.7%, 0.2-1.6%, 0.9-5.9%, and 1.8-14.4%, respectively. The prevalence of two canals was higher in males than in females both in the maxillary and mandibular anterior teeth (P < 0.05). Conclusions: Type 1 was the most prevalent canal configuration of maxillary and mandibular anterior teeth in the Turkish population. Type 5 was the most frequently observed canal configuration of the two canalled teeth. The incidence of root canal numbers and configurations differed with sex.

Sign in / Sign up

Export Citation Format

Share Document