Distribution of galling insects and their parasitoids on Caryocar brasiliense tree crowns

Caryocar brasiliense Camb. (Malpighiales: Caryocaraceae) is widely distributed in the Brazilian savanna and its fruits are used by humans for food, production of cosmetics, lubricants, and in the pharmaceutical industry. This plant is damaged by galling insects. Number of these galling insects and their parasitoids was recorded, in the field (galls) and in the laboratory (adults emerged from the galls), from three C. brasiliense crown heights, during three years. Numbers of adults of Eurytoma sp. (Hymenoptera: Eurytomidae), galling insect (younger attack) and Sycophila sp. (Hymenoptera: Eurytomidae) (a parasitoid of Eurytoma sp.), were greater on the apical parts of C. brasiliense tree crowns. Numbers and groups of Eurytoma sp. globoid galls (older attack) were higher in the median and basal crown parts. The numbers of Eurytoma sp. galls were higher on apical part of C. brasiliense tree crown and also of their parasitoids.

Anatomical Variations in Leaves of Pisum sativum Grown with Wastewater of Different Industries

An experiment was carried out to evaluate the anatomical variations in leaves of Pisum sativum grown in medium irrigated with different industrial wastewaters. The Sukhrawa drain area was selected for the collection of wastewaters of different industries in district Okara, Punjab, Pakistan. The experiment was comprised of six wastewater treatments, including protein farm wastewater, rice mill wastewater, combined wastewater of hospital and oil mill, paper mill wastewater and municipal wastewater. The results of anatomical variations in the epidermis, vascular bundle, palisade, and mesophyll cells indicated that the apical part, center, and base of leaf blade all showed normal structure and healthy cells when irrigated with rice mill wastewater and paper mill wastewater, while the center of leaf blade also showed good results when irrigated with the municipal wastewater. So, the results indicate that pea plants can be grown with wastewater from the rice mill, paper mill and municipal wastewater. In the future, wastewater from rice mills, paper mills and municipal wastewater should be considered to check for possible anatomical variations in other plants.

Experimental studies of a machine for collecting the Colorado potato beetle

ional Academy of Sciences of Belarus, Minsk, the Republic of Belarus The substantiation of the design and technological scheme of the machine for the mechanical collection of the Colorado potato beetle in the production of environmentally friendly potato is carried out. The parameters and modes of rotors with flexible-elastic blades and regulators of the amplitude of their oscillations, providing high-quality shaking and collection of Colorado potato beetle individuals from the tops with minimal damage, have been experimentally substantiated. A description of the laboratory installation, an experimental sample of a combined unit is presented, and a methodology for conducting experiments is described. Experimental studies were carried out in 2004-2008 in the experimental field of the Educational institution "Grodno State Agrarian University" (UO "GGAU") and in the fields of the Agricultural production cooperative (SEC) "Zanemansky" of the Mostovsky dis-trict of the Grodno region. It was found that in order to reduce the energy intensity of the process, the interaction of the rotor with the tops in its apical part, where the maximum con-centration of Colorado potato beetle individuals takes place, is expedient. The minimum amount of beetle on the tops and the absence of visible damage to it are achieved when the diameter of the nylon threads of the blade is 1.2-1.5 mm, and the rational position of the regulator from the rotor axis is 0.14-0.18 m according to the energy intensity condition. Under the condition of minimal energy consumption of the process and without visible damage to the leaves, the circumferential speed range of the rotor should be 3-4 m/s. A regression equation of the second degree is obtained, which determines the relationship of the residual number of beetle individuals on the tops after the passage of the machine with the circumferential speed of the rotor Voc, the position of the regulator on the radius of the rotor Rr and the cross section of the blade Sbl. The optimal values were determined by solving the equation: Voc = 3.7 m/s, Rr = 0.16 m, Sbl = 1800 mm2 .

A biomechanical analysis of different meshes for reconstructions of the pelvic floor in the porcine model

Purpose Many different surgical approaches have been established for the repair of a pelvic organ prolapse. Especially in laparoscopic surgery, it is important to generate easy surgical techniques with similar stability. This study shall simplify the choice of mesh by evaluating three polypropylene meshes regarding their biomechanical properties. Methods Biomechanical testing was performed in the porcine model. The meshes are fixated on porcine fresh cadaver cervices after subtotal hysterectomy. The apical part of the mesh is fixated with parallel screw clamps at the testing frame. Forty-one trials were performed overall, subdivided into four subgroups. The groups differ in mesh type and fixation method. Maximum load, displacement at failure and stiffness parameters were evaluated with an Instron 5565® test frame. Results SERATEX® E11 PA (E11) showed the highest values for maximum load (199 ± 29N), failure displacement (71 ± 12 mm) and stiffness (3.93 ± 0.59 N/mm). There was no significant difference in all three evaluated parameters between SERATEX® B3 PA (B3) and SERATEX® SlimSling® with bilateral fixation (SSB). SERATEX® SlimSling® with unilateral fixation (SSU) had the lowest stiffness (0.91 ± 0.19 N/mm) and maximum load (30 ± 2 N) but no significant difference in displacement at failure. Conclusion All meshes achieved a good tensile strength, but the results of maximum load show that the E11 is superior to the other meshes. Through a bilateral fixation of SERATEX® SlimSling®, a simple operating method is generated without a loss of stability.

Characterization of the morphology and complete mitochondrial genomes of Eupteryx minusula and Eupteryx gracilirama (Hemiptera: Cicadellidae: Typhlocybinae) from Karst area, Southwest China

Background The hemipteran insect family Cicadellidae (leafhoppers) includes >2,600 valid genera and >22,000 valid species worldwide, including >2,000 species in China. Typhlocybinae, second largest subfamilies of Cicadellidae, is widely distributed in the six major zoogeographic regions of the world, including >4,000 species worldwide and >1,000 species in China. Previously, morphological analysis are often effective to the way of taxonomy, but it did not combine with molecular biology. Therefore, morphology and mitochondrial genomes (mitogenomes) of two leafhopper species, Eupteryx (Eupteryx) minuscula Lindberg, 1929 and Eupteryx (Stacla) gracilirama Hou, Zhang & Huang, 2016 were studied and analyzed. This study analyzed the morphological and molecular characteristics of the two leafhoppers, and showed whether the results of the two identifications were consistent. Methods Based on the method of comparison, mitogenomes and morphology were analyzed to prove the relationship between the two leafhoppers. Results Although two focal species are classified in two different subgenera of the same genus, they still share many morphological features, such as the moderately produced crown fore margin; the milky yellow apical part of scutellum; the pronotum, basal triangles of scutellum, and forewing are dark with several colorless patches on the surface; the light yellow face, without any spots or stripes, and so on. The circular mitogenomes are 16,944 bp long in E. minuscula (GenBank: MN910279) and 17,173 bp long in E. gracilirama (GenBank: MT594485). All of the protein-coding genes are starting with ATN, except for some in mitogenome, which has a single T or TAN as a stop codon. All tRNAs have the typical cloverleaf-shaped structure except for trnS1 (AGN) (E. minuscula) which has a reduced DHU arm. Moreover, these two mitogenomes have trnR with an unpaired base in the acceptor stem. The phylogenetic relationships between E. minuscula and E. gracilirama in respect to related lineages were reconstructed using Maximum likelihood and Maximum parsimony analyses. Discussion The result showed that the tribe Typhlocybini is a sister to the tribes Erythroneurini and Empoascini, and five genera, Bolanusoides, Typhlocyba, Eupteryx, Zyginella and Limassolla are forming a single clade. E. minuscula and E. gracilirama are clustered together, supporting the monophyly of the genus Eupteryx. The above conclusions are consistent with the traditional classification of the subfamily.

The Pellicle–Another Strategy of the Root Apex Protection against Mechanical Stress?

In grasses, the apical part of the root is covered by a two-layered deposit of extracellular material, the pellicle, which together with the outer periclinal wall of protodermal cells forms the three-layered epidermal surface. In this study, the effect of mechanical stress on the pellicle was examined. An experiment was performed, in which maize roots were grown in narrow diameter plastic tubes with conical endings for 24 h. Two groups of experimental roots were included in the analysis: stressed (S) roots, whose tips did not grow out of the tubes, and recovering (R) roots, whose apices grew out of the tube. Control (C) roots grew freely between the layers of moist filter paper. Scanning electron microscopy and confocal microscopy analysis revealed microdamage in all the layers of the epidermal surface of S roots, however, protodermal cells in the meristematic zone remained viable. The outermost pellicle layer was twice as thick as in C roots. In R roots, large areas of dead cells were observed between the meristematic zone and the transition zone. The pellicle was defective with a discontinuous and irregular outermost layer. In the meristematic zone the pellicle was undamaged and the protodermal cells were intact. The results lead to the conclusion that the pellicle may prevent damage to protodermal cells, thus protecting the root apical meristem from the negative effects of mechano-stress.

Root form and canal anatomy of maxillary first premolars: a cone-beam computed tomography study

The aim of this study was to evaluate the root and canal morphology of permanent maxillary first premolars in a Polish population using cone-beam computed tomography scanning (CBCT) and to compare the classifications by Vertucci and Ahmed et al. Images of 350 maxillary first premolars were analyzed. Scans were obtained from 226 patients: 131 women and 95 men. The root canal configurations were classified according to Vertucci and a new system by Ahmed et al. In addition, the number of roots and the level where roots bifurcated were identified. The results were submitted to statistical analysis. Most maxillary first premolars had two roots (69.1%). Most bifurcations were located in the coronal part of the root (44.2%) and the least in the apical part (15.3%). Bifurcation in the coronal part of the root was observed more often in the teeth of men than women. In turn, bifurcation in the central or apical part was significantly more common in women than in men. The most common canal configuration of the maxillary first premolars was type IV (78.2%) according to Vertucci and 2FPB1P1 (65.4%) according to the new classification. Among the remaining cases, almost all types of canals described by Vertucci, and many combinations of codes given in the new classification were demonstrated. The maxillary first premolars displayed a wide range of root and canal anatomical variations. The new system for classifying canal morphology based on Ahmed et al. is more accurate than the Vertucci classification.

Leaf-cutting ant (Atta laevigata Smith) in an African mahogany plantation in Minas Gerais state, Brazil

Khaya grandifoliola C. DC. (Meliaceae), known as African mahogany, is used in the establishment of commercial plantations for high-value timber production. This work aims to report the first occurrence of the genus Atta in a commercial plantation of this species. An ant nest mound with 105 m2 of loose soil and five active ant holes were observed. Leaves cut into crescent shaped sections and pieces of young branches were found near these holes, in addition to trees with the apical part of their crown partially defoliated. The collected specimens were identified as Atta laevigata Smith (Hymenoptera: Formicidae: Attini), locally known as the glass-head leaf-cutting ant.

Deep margin elevation: a systematic review

Deep margin elevation (DME) is a nonsurgical, alternative technique of dental crown lengthening. Portion of direct restoration placed only at the deep apical part of the cavity to elevate the margin to a more coronal and more adequate position for final cementation of indirect restoration.Materials and methods. In this systematic review, we were looking for in vitro studies in which deep margin elevation (DME) technique were used. The electronic databases PubMed and EMBASE were used for the search. The search began on July 29, 2021 and ended on August 10, 2021. We have analyzed the materials and methods of each research and entered them in the appropriate tables to give a clearer assessment of the obtained results.Results. Analysis of marginal quality showed the best results when indirect restorations luted to dentin directly and with DME technique with three consecutive layers of resin composite. In groups without DME there were fewer microleakage. DME did not statistically significantly influence the fracture strength.Conclusions. We conducted a systematic review that included 12 in vitro studies. Even though samples without DME showed better results in in vitro studies, the difference between samples with and without DME was not statistically significant. However, in clinical practice, DME facilitates the insertion of indirect restorations. Therefore, further studies and clinical observations are necessary.

A new species and key to known species of the genus Conophymacris Willemse, 1933 (Orthoptera, Acridoidea, Catantopidae, Podisminae) from China

A new species in the genus Conophymacris Willemse, 1933 from Yunnan, China is described. The new species Conophymacris reni sp. nov. is similar to C. jiulongensis Zheng et al., 2009, but differs from latter in width of vertex between eyes of male equal to 2.8 width of frontal ridge between antennae, epiproct of male width longer than length, cercus of male apical part not wider, tegmina extending over the hind margin of first abdominal tergum, hind tibia all red, epiphallus ancorae small, lower than anterior projection, lophi not acute, width of subgenital plate shorter than its length and hind margin with 1 tooth in female. Type specimens are deposited in the Natural Museum of Hebei University, Baoding, Hebei, China.