scholarly journals Effects of Impactor Geometry on the Low-Velocity Impact Behaviour of Fibre-Reinforced Composites: An Experimental and Theoretical Investigation

2020 ◽  
Vol 27 (5) ◽  
pp. 533-553 ◽  
Author(s):  
Haibao Liu ◽  
Jun Liu ◽  
Yuzhe Ding ◽  
Jin Zhou ◽  
Xiangshao Kong ◽  
...  
Keyword(s):  
Composite Laminates ◽  
Damage Model ◽  
Three Dimensional ◽  
Low Velocity Impact ◽  
Fe Model ◽  
Low Velocity ◽  
Impact Behaviour ◽  
Numerical Predictions ◽  
Damage Maps ◽  
The Impact

Abstract Carbon-fibre/epoxy-matrix composites used in aerospace and vehicle applications are often susceptible to critical loading conditions and one example is impact loading. The present paper describes a detailed experimental and numerical investigation on the relatively low-velocity (i.e. <10 m/s) impact behaviour of such composite laminates. In particular, the effects of the geometry of the impactor have been studied and two types of impactor were investigated: (a) a steel impactor with a hemispherical head and (b) a flat-ended steel impactor. They were employed to strike the composite specimens with an impact energy level of 15 J. After the impact experiments, all the composite laminates were inspected using ultrasonic C-scan tests to assess the damage that was induced by the two different types of impactor. A three-dimensional finite-element (FE) model, incorporating a newly developed elastic-plastic damage model which was implemented as a VUMAT subroutine, was employed to simulate the impact event and to investigate the effects of the geometry of the impactor. The numerical predictions, including those for the loading response and the damage maps, gave good agreement with the experimental results.

Failure Analysis of CCF300/5428 Laminates under Low Velocity Impact Based on Properties of Advanced Composite Material

2013 ◽  
Vol 387 ◽  
pp. 185-188
Author(s):  
Jian Yu Zhang ◽  
Ming Li ◽  
Li Bin Zhao ◽  
Bin Jun Fei
Keyword(s):  
Failure Analysis ◽  
Composite Laminates ◽  
Damage Model ◽  
Failure Criteria ◽  
Low Velocity Impact ◽  
Material System ◽  
Low Velocity ◽  
3D Fem ◽  
Velocity Impact ◽  
The Impact

A progressive damage model (PDM) composed by 3D FEM, Hashin and Ye failure criteria and Changs degradation rules was established to deeply understand the failure of a new material system CCF300/5428 under low velocity impact. User defined subroutines were developed and embedded into the general FEA software package to carry out the failure analysis. Numerical simulations provide more information about the failure of composite laminates under low velocity impact, including initial damage status, damage propagation and final failure status. The history of the impact point displacement and various damage patterns were detailed studied.

The Effect of the Impactor Diameter and Boundary Conditions on Low Velocity Impact Composites Behaviour

2007 ◽  
Vol 7-8 ◽  
pp. 217-222 ◽  
Author(s):  
Ana M. Amaro ◽  
Paulo N.B. Reis ◽  
A.G. Magalhães ◽  
Marcelo F.S.F. de Moura
Keyword(s):  
Boundary Conditions ◽  
Damage Model ◽  
Testing Machine ◽  
Three Dimensional ◽  
Experimental Tests ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Impact Energies ◽  
The Impact

The aim of present work is to study the influence of the impactor diameter and boundary conditions on low velocity impact on carbon-fibre-reinforced epoxy laminates. Experimental tests were performed on [04,904]s laminates, using a drop weight-testing machine. Circular plates were tested under low velocity impacts for two diameters of the hemispherical impactor, 12.7 mm and 20 mm, and considering similar impact energies, 2.6 J for the first impactor and 3 J for the second one. Rectangular and square plates were analysed under low velocity impacts with different boundary conditions. The impacted plates were inspected by X-radiography. Numerical simulations were also performed considering interface finite elements compatible with three-dimensional solid elements including a cohesive mixed-mode damage model, which allows to model delamination between layers. The impact tests showed that both the impactor’s diameter and boundary conditions have influence on the delaminated area. Good agreement between experimental and numerical analysis for shape, orientation and size of damage was obtained.

scholarly journals Impact Response and Damage Characteristics of Carbon Fiber Reinforced Aluminum Laminates Under Low Velocity Impact Loading

2020 ◽  
Vol 9 (4) ◽  
pp. 1831-1837
Keyword(s):  
Impact Energy ◽  
Impact Load ◽  
Three Dimensional ◽  
Low Velocity Impact ◽  
Fe Model ◽  
Low Velocity ◽  
Fiber Layer ◽  
Cross Sectional ◽  
Velocity Impact ◽  
The Impact

CARALL hybrid material has been extensively used in the aircraft structure due to their competitive impact strength. Low velocity impact test is utilized to evaluate the impact and damage properties for such material. It is also employed to observe complex damage mechanisms. A numerical modelling is an alternative way for impact assessment. This paper investigates the impact and damage properties under low velocity impact using numerical modeling and experimental work. A three-dimensional (3D) finite element (FE) model was devolved and validated with two studies from the literature. This model was meshed with solid elements. It was subjected to 2.4 m/s impact velocity and to 10 J impact energy. Absorbed energy, penetration, impact load and damage morphology were obtained. The impact energy was efficiently absorbed by the material. Both aluminum alloy layers underwent plastic deformation whereas the fiber layer failed. A macroscopic cross-sectional morphology was presented using the FE model. An agreement between the numerical and the experiment results were achieved and discussed.

Bridging the low-velocity impact energy versus impact damage and residual compression strength for composite laminates

2020 ◽  
pp. 073168442097064
Author(s):  
Di Zhang ◽  
Xitao Zheng ◽  
Jin Zhou ◽  
Wenxuan Zhang
Keyword(s):  
Impact Energy ◽  
Composite Laminates ◽  
Damage Model ◽  
Low Velocity Impact ◽  
Fe Model ◽  
Material System ◽  
Cohesive Elements ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Area

A finite element (FE) model based on fiber kinking and a transversal fracture angle damage model with cohesive elements are proposed to simulate the low-velocity impact (LVI) and compression after impact (CAI), and build a relationship between LVI energy and CAI strength of composites. The proposed FE model is validated by a comprehensive experimental work conducted using a high strength carbon fiber/epoxy material system i.e. CCF300/BA9916II and underwent LVI and CAI experimentation.  The relative errors between numerical and experimental results of LVI damage area, maximum impact force, impact time, as well as CAI strength are less than 5%. The FE analysis results of LVI show that the dominant damage mode is delamination, and the CAI results demonstrate a brittle behavior with almost no loss of stiffness before failure. It is further deduced that the relationship of LVI energy and damage induced is directly proportional initially; however, after a threshold level of impact energy, the curve turns horizontal so that the increase in further impact energy does not increase the damage area substantially. A similar relationship is developed between impact energy and CAI strength.

Influence of the Metallic Cold Spray Deposition on the Low-Velocity Impact Behaviour of Composite Laminates

2019 ◽  
Vol 813 ◽  
pp. 376-380
Author(s):  
Ilaria Papa ◽  
Pietro Russo ◽  
Antonello Astarita ◽  
Antonio Viscusi ◽  
Alessia Serena Perna ◽  
...  
Keyword(s):  
Composite Materials ◽  
Cold Spray ◽  
Composite Laminates ◽  
Spray Deposition ◽  
Low Velocity Impact ◽  
Flame Resistance ◽  
Low Velocity ◽  
Velocity Impact ◽  
Impact Behaviour ◽  
The Impact

Recently, the growing attraction to the development of new eco-sustainable composite materials is driving the research interest toward the replacement of synthetic reinforcing fibres with natural ones and exploiting the inherent recyclability of thermoplastic resins even for uses in which thermosetting matrices are well consolidated (e.g. naval and aeronautical fields). Among the natural fibres, a growing interest of the research is addressed to basalt fibres. Focusing the attention on thermoplastic composites, many experimental findings already available in literature highlight the outstanding mechanical properties of composite materials including basalt fibres and their potentiality concerning glass ones. On the other hand, some issues are related to the surface properties of the bio-laminates: in particular, the wear ones, the flame resistance and the aesthetic appearance have to be improved to extend the application fields of these materials. Aiming to these goals, this paper deals with the study of the deposition ofaluminium coating through cold spray process on polypropylene/basalt fabric composite laminates. The specimens were obtained by film stacking, and compression moulding technology and their performances were studied in terms of low-velocity impact behaviour, considering the influence of the surface modification with the aluminium coating. The results obtained from the reference laminates and the coated ones are compared in terms of impact parameters: the aluminium deposition seems to affect the damage mechanism propagation even if the impact response seems to be similar in both conditions.

Experimental Investigation of Impacted and Non-Impacted Composite Laminates under Compressive Loading

2011 ◽  
Vol 284-286 ◽  
pp. 607-610
Author(s):  
Jiang Tao Ruan ◽  
Min Shen ◽  
Jing Wei Tong ◽  
Shi Bin Wang ◽  
Francesco Aymerich ◽  
...  
Keyword(s):  
Composite Laminates ◽  
Optical Measurement ◽  
Speckle Pattern ◽  
Compressive Loading ◽  
Laminated Plates ◽  
Low Velocity Impact ◽  
Compressive Deformation ◽  
Electronic Speckle Pattern Interferometry ◽  
Low Velocity ◽  
The Impact

In this paper, the deformation measurements of impacted and non-impacted composite laminates under compressive loading are taken. [03/903]S orientated cross-ply laminated plates with impact delamination and without delamination are tested using an anti-buckling testing device in compression experiment. The delamination is induced by low-velocity impact test at the impact energy level of 3.105J. For both impacted and non-impacted specimens, the compressive deformation is measured by a carrier electronic speckle pattern interferometry (CESPI) optical measurement technique. It is found that the deformation behavior of the two specimens presents a mixed deformation mode. However, the delamination has significant effect on the compressive deformation of composite laminates.

Low Velocity Impact on Fiber Reinforced Geocomposites

2016 ◽  
Vol 827 ◽  
pp. 145-148 ◽  
Author(s):  
Sneha Samal ◽  
David Reichmann ◽  
Iva Petrikova ◽  
Bohdana Marvalova
Keyword(s):  
Impact Damage ◽  
Acoustic Vibration ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Impact Behaviour ◽  
Reinforced Composite ◽  
Before And After ◽  
Two Parameters ◽  
The Impact

Low velocity impact strength of the fabric reinforced geocomposite has investigated in this article. Various fabrics such as carbon and E-glass were considered for reinforcement in geopolymer matrix. The primary two parameters such as low velocity, impact damage modes are explained on the E-glass and carbon based fabric geocomposite. The onset mode of damage to failure mode is examined through C-scan analysis. The quality of the composite is observed using c-scan with acoustic vibration mode of sensor before and after impact test. Then the effect of fabric and matrix on the impact behaviour is discussed. Residual strength of the composite is measured to determine post impact behaviour. It has been observed that resistance properties of E-glass reinforced composite is better than carbon fabric reinforced composite.

scholarly journals A progressive damage model of composite laminates under low-velocity impact

2021 ◽  
Vol 39 (1) ◽  
pp. 37-45
Author(s):  
Junjie Zhou ◽  
Shengnan Wang
Keyword(s):  
Composite Laminates ◽  
Impact Force ◽  
Damage Model ◽  
Low Velocity Impact ◽  
Progressive Damage ◽  
Low Velocity ◽  
Damage Development ◽  
Velocity Impact ◽  
Progressive Damage Model ◽  
Matrix Damage

In this paper, a progressive damage model for studying the dynamic mechanical response and damage development of composite laminates under low-velocity impact was established. The model applied the Hashin and Hou failure criteria to predict the initiation of intra-laminar damage (fiber and matrix damage); a linear degradation scheme combined with the equivalent displacement method was adopted to simulate the damage development; a cohesive zone model with the bilinear traction-separation relationship was used to predict delamination. A user material subroutine VUMAT was coded, and the simulation analysis of carbon fiber reinforcement composite laminates subjected to 25 J impact was performed via commercial software ABAQUS. The predicted impact force-time curve, impact force-displacement curve, and damage distribution contours among the layers were in a good agreement with the experimental, which verified the proposed model. According to the simulation results, the fiber damage and matrix damage were analyzed, and the expansion of delamination was discussed.

Compressive Strength of CCF300/QY8911 Composite Laminates with LVI Damage

2012 ◽  
Vol 583 ◽  
pp. 203-206
Author(s):  
Hai Ming Hong ◽  
Ming Li ◽  
Jian Yu Zhang ◽  
Yi Ning Zhang
Keyword(s):  
Compressive Strength ◽  
Impact Energy ◽  
Composite Laminates ◽  
Inflection Point ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Damage Area ◽  
Compressive Performance ◽  
The Impact ◽  
Dent Depth

A series of low-velocity impact tests and residual compressive strength tests after impacts on CCF300/QY8911 composite materials were carried out to study the mechanism of compression failure of the laminates after low-velocity impact. The curves of impact energy verse dent depth and impact energy verse the damage area was obtained. And the residual compressive strength and stiffness after impact verse damage parameters were analyzed. The results showed that when the impact energy exceeded the inflection point, as the impact energy increased, the dent depth on the impacted surface of the laminates notably increased while the damage area of the internal layers merely increased slowly. If the impact energy was continued to increase, the expansion of the laminates' internal damage mainly consisted of fiber breaks. The main reason for the decrease in compressive performance of composite laminates was inside delamination between layers, while in the case in which impact energy exceeded the inflection point, there were no obvious changes in delamination damage area for different energy, so the residual compressive performance kept almost stable.

scholarly journals Static Residual Tensile Strength Response of GFRP Composite Laminates Subjected to Low-Velocity Impact

2020 ◽  
Vol 10 (16) ◽  
pp. 5480
Author(s):  
Jong-Il Kim ◽  
Yong-Hak Huh ◽  
Yong-Hwan Kim
Keyword(s):  
Tensile Strength ◽  
Composite Laminates ◽  
Impact Damage ◽  
Image Correlation ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Stress Concentrations ◽  
Low Velocity ◽  
Full Field ◽  
The Impact

The dependency of the static residual tensile strength for the Glass Fiber-Reinforced Plastic (GFRP) laminates after impact on the impact energy level and indent shape is investigated. In this study, two different laminates, unidirectional, [0°2]s) and TRI (tri-axial, (±45°/0°)2]s), were prepared using the vacuum infusion method, and an impact indent on the respective laminates was created at different energy levels with pyramidal and hemispherical impactors. Impact damage patterns, such as matrix cracking, delamination, debonding and fiber breakage, could be observed on the GFRP laminates by a scanning electron microscope (SEM), and it is found that those were dependent on the impactor head shape and laminate structure. Residual in-plane tensile strength of the impacted laminates was measured and the reduction of the strength is found to be dependent upon the impact damage patterns. Furthermore, in this study, stress concentrations in the vicinity of the indents were determined from full-field stress distribution obtained by three-dimensional Digital Image Correlation (3D DIC) measurement. It was found that the stress concentration was associated with the reduction of the residual strength for the GFRP laminates.

Sign in / Sign up

Export Citation Format

Share Document