Factors affecting prior austenite grain size in low alloy steel

2006 ◽  
Vol 42 (4) ◽  
pp. 1309-1320 ◽  
Author(s):  
S. Maropoulos ◽  
S. Karagiannis ◽  
N. Ridley
Keyword(s):  
Grain Size ◽  
Alloy Steel ◽  
Prior Austenite ◽  
Low Alloy Steel ◽  
Austenite Grain Size ◽  
Factors Affecting ◽  
Austenite Grain ◽  
Prior Austenite Grain Size ◽  
Prior Austenite Grain

Carbide composition changes in a low alloy steel

1990 ◽  
Vol 48 (2) ◽  
pp. 420-421
Author(s):  
Z. Larouk ◽  
R. Pilkington
Keyword(s):  
Alloy Steel ◽  
Prior Austenite ◽  
Creep Behaviour ◽  
Low Alloy Steel ◽  
Austenite Grain Size ◽  
Austenite Grain ◽  
Heat Treated ◽  
Prior Austenite Grain Size ◽  
Composition Changes ◽  
Prior Austenite Grain

Durehete 1055 is a 1%Cr1%Mo¾%V low alloy steel used as bolting material at 565°C. It also contains 0.08%Ti and 0.005%B to improve the creep behaviour, but deleterious properties have been reported, due to the presence of trace elements such as P and Sn. The present work has been an attempt to understand this problem by examining three vacuum melted casts of this steel containing selected additions (wt.%) of 1) 0.08 Ti, 2) 0.08 Ti and 0.02 P; and 3) 0.08 Ti and 0.02 Sn. The material was heat treated for 2h at 980°C, W.Q., and tempered 4h at 680°C, giving a prior austenite grain size of 8 μm. Specimens were then crept for various times at 565°C. After test, metallographic samples were prepared from both the gauge lengths (stressed) and heads (unstressed) to enable the production of carbon extraction replicas. These replicas were examined in a Philips 400T electron microscope, and carbides analysed using EDS.

scholarly journals A New Systematic Approach Based on Dilatometric Analysis to Track Bainite Transformation Kinetics and the Influence of the Prior Austenite Grain Size

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 324
Author(s):  
David San-Martin ◽  
Matthias Kuntz ◽  
Francisca G. Caballero ◽  
Carlos Garcia-Mateo
Keyword(s):  
Heat Treatment ◽  
Grain Size ◽  
Prior Austenite ◽  
Bainitic Transformation ◽  
Transformation Rate ◽  
Transformation Kinetics ◽  
Austenite Grain Size ◽  
Austenite Grain ◽  
Prior Austenite Grain Size ◽  
Prior Austenite Grain

This investigation explores the influence of the austenitisation heat treatment and thus, of the prior austenite grain size (PAGS), on the kinetics of the bainitic transformation, using as A case study two high-carbon, high-silicon, bainitic steels isothermally transformed (TIso = 250, 300, 350 °C), after being austenised at different temperatures (γTγ = 925–1125 °C). A methodology, based on the three defining dilatometric parameters extracted from the derivative of the relative change in length, was proposed to analyse the transformation kinetics. These parameters are related to the time to start bainitic transformation, the time lapse for most of the transformation to take place and the transformation rate at the end of the transformation. The results show that increasing the PAGS up to 70 µm leads to an increase in the bainite nucleation rate, this effect being more pronounced for the lowest TIso. However, the overall transformation kinetics seems to be weakly affected by the applied heat treatment (γTγ and TIso). In one of the steels, PAGS > 70 µm (γTγ > 1050 °C), which weakly affects the progress of the transformation, except for TIso = 250 °C, for which the enhancement of the autocatalytic effect could be the reason behind an acceleration of the overall transformation.

scholarly journals Exploring the Difference in Bainite Transformation with Varying the Prior Austenite Grain Size in Low Carbon Steel

Metals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 988 ◽  
Author(s):  
Liangyun Lan ◽  
Zhiyuan Chang ◽  
Penghui Fan
Keyword(s):  
Grain Size ◽  
Prior Austenite ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Bainite Transformation ◽  
Austenite Grain Size ◽  
Austenite Grain ◽  
Austenite Grains ◽  
Prior Austenite Grain Size ◽  
Prior Austenite Grain

The simulation welding thermal cycle technique was employed to generate different sizes of prior austenite grains. Dilatometry tests, in situ laser scanning confocal microscopy, and transmission electron microscopy were used to investigate the role of prior austenite grain size on bainite transformation in low carbon steel. The bainite start transformation (Bs) temperature was reduced by fine austenite grains (lowered by about 30 °C under the experimental conditions). Through careful microstructural observation, it can be found that, besides the Hall–Petch strengthening effect, the carbon segregation at the fine austenite grain boundaries is probably another factor that decreases the Bs temperature as a result of the increase in interfacial energy of nucleation. At the early stage of the transformation, the bainite laths nucleate near to the grain boundaries and grow in a “side-by-side” mode in fine austenite grains, whereas in coarse austenite grains, the sympathetic nucleation at the broad side of the pre-existing laths causes the distribution of bainitic ferrite packets to be interlocked.

Sign in / Sign up

Export Citation Format

Share Document