Comparison of the sorption properties of natural and synthetic zeolites for the purification of aqueous solutions from cobalt: sorption of the cobalt from aqueous solutions in dynamic conditions and the quantitative determination of cobalt by the PIXE method

2018 ◽  
Vol 315 (2) ◽  
pp. 163-169 ◽  
Author(s):  
A. Yu Lonin ◽  
V. V. Levenets ◽  
O. P. Omelnik ◽  
A. O. Shchur
Keyword(s):  
Aqueous Solutions ◽  
Quantitative Determination ◽  
Sorption Properties ◽  
Dynamic Conditions ◽  
Synthetic Zeolites ◽  
Pixe Method ◽  
Natural And Synthetic

scholarly journals Recovery of Hg(0) from the Aqueous Hg(I/II) Present in Analyte Solution after Quantitative Determination of Iron

2013 ◽  
Vol 2013 ◽  
pp. 1-3
Author(s):  
Suman K. Giri ◽  
Nigamananda Das
Keyword(s):  
Aqueous Solutions ◽  
Quantitative Determination ◽  
Simple Method ◽  
Stoichiometric Amount ◽  
Analyte Solution

An easy and feasible approach to recover HgCl2, used in quantitative determination of iron values, as Hg(0) was described. Both Hg(I) and Hg(II), present in the solution after quantitative determination of iron, was completely reduced to Hg(0) by the addition of aluminium chips in more slightly excess than the stoichiometric amount. The purity of recovered Hg(0) was verified by comparing the value of density with pure mercury. This simple method may be useful to remove the mercury from other waste aqueous solutions before their discharge into the environment.

scholarly journals The Simultaneous Removal of Zinc and Cadmium from Multicomponent Aqueous Solutions by Their Sorption onto Selected Natural and Synthetic Zeolites

Minerals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 343 ◽  
Author(s):  
Bożena Kozera-Sucharda ◽  
Barbara Gworek ◽  
Igor Kondzielski
Keyword(s):  
Aqueous Solutions ◽  
Low Cost ◽  
Environmental Pollutants ◽  
Chemical Properties ◽  
Simultaneous Removal ◽  
Physico Chemical ◽  
Synthetic Zeolites ◽  
Sorption Mechanisms ◽  
Synthetic Aluminosilicate ◽  
Natural And Synthetic

Natural and synthetic aluminosilicate minerals, in particular zeolites, are considered to be very useful in remediation processes, such as purification of waters polluted with heavy metals. That is due to their unique and outstanding physico-chemical properties, rendering them highly efficient, low-cost, and environmentally friendly sorbents of various environmental pollutants. The aim of this study was to examine the sorption capacity of four selected zeolites: A natural zeolite and three synthetic zeolites (3A, 10A, and 13X), towards zinc and cadmium present in multicomponent aqueous solutions, in relation to identified sorption mechanisms. It was stated that synthetic zeolites 3A and 10A were the most efficient in simultaneous removal of zinc and cadmium from aqueous solutions. Additionally, zeolite 10A was demonstrated to be the mineral best coping with prolonged pollution of water with those elements. The mechanism of sorption identified for tested minerals was physisorption.

Quantitative Determination of Cadmium in Water-Soluble Color Additives by Atomic Absorption Spectroscopy

1972 ◽  
Vol 55 (5) ◽  
pp. 1145-1149
Author(s):  
Lueangier Moten
Keyword(s):  
Aqueous Solutions ◽  
Quantitative Determination ◽  
Atomic Absorption ◽  
Absorption Spectroscopy ◽  
Atomic Absorption Spectroscopy ◽  
Quantitative Method ◽  
Water Soluble ◽  
Low Levels ◽  
Absorption Measurements

Abstract A quantitative method is presented for the determination of cadmium at low levels (5–20 ppm) in water-soluble color additives by atomic absorption spectroscopy. Absorption measurements were made on aqueous solutions of typical color additives to which known amounts of cadmium had been added. The method requires no pretreatment of sample and should be applicable to all water-soluble color additives.

scholarly journals Sorption of Heavy Metal Ions of Chromium, Manganese, Selenium, Nickel, Cobalt, Iron from Aqueous Acidic Solutions in Batch and Dynamic Conditions on Natural and Synthetic Aluminosilicate Sorbents

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5271
Author(s):  
Jolanta Flieger ◽  
Justyna Kawka ◽  
Wojciech Płaziński ◽  
Rafał Panek ◽  
Jarosław Madej
Keyword(s):  
Metal Ions ◽  
Fixed Bed ◽  
Sorption Properties ◽  
Column Studies ◽  
Acidic Solutions ◽  
Nickel Cobalt ◽  
X Zeolite ◽  
Synthetic Zeolites ◽  
The Individual ◽  
Natural And Synthetic

Zeolites are materials with known sorption properties. The sorption is thought to progress mainly by ion exchange with Na+, K+, Mg2+, Ca2+ or H+ from the zeolite exchange sites. The aim of the study was to compare the sorption properties of natural and synthetic zeolites on the example of the removal of selected metals from aqueous acidic solutions. Uptake experiments for selected ions of chromium, manganese, selenium, nickel, cobalt, and iron were performed using the batch and kinetic column methods. The sorption of the individual metal ions in mg per 1g of sorbent was determined for each sorbent. The relative affinity sequence of the examined cations toward the various sorbent was presented. The Langmuir model was used to model the adsorption equilibrium. Vermiculite under 1 mm of diameter (SF), Na-X, and Na-A were proved to be the most suitable for the individual uptake of studied metal ions. It was observed that the behavior of selenium ions differed from the remaining ones which was interpreted that selenium undergoes adsorption in the anionic form. The fixed-bed column studies were performed using Na-A, ensuring the sorption of selenium in the presence of iron(III) ions. The experiments were conducted using Na-X zeolite pre-loaded by Fe(III) as well as unmodified sorbent eluted by an equimolar mixture containing 100 ppm of Fe and Se. Obtained results prove that selenium sorption improves if other metal ions such as iron appear in the acidic solution. That efficient selenium sorption conditions can be applied to remove selenium which was recognized as toxic at higher levels.

Methods for quantitative determination of ethylene in aqueous solutions for biological studies.

1981 ◽  
Vol 4 (4) ◽  
pp. 271-274
Author(s):  
P. K. Bassi ◽  
K. C. Eastwell ◽  
T. Akalehiywot ◽  
Mary S. Spencer
Keyword(s):  
Aqueous Solutions ◽  
Quantitative Determination ◽  
Biological Studies

scholarly journals Development and Validation of Method for the Quantitative Determination of Zinc in its Chelate Complexes Using Energy Dispersive X-ray Fluorescence Spectroscopy

2021 ◽  
Vol 10 (4) ◽  
pp. 154-161
Author(s):  
А. V. Marukhlenko ◽  
Т. V. Maksimova ◽  
Т. V. Pleteneva ◽  
М. A. Morozova
Keyword(s):  
Fluorescence Spectroscopy ◽  
Aqueous Solutions ◽  
Quantitative Determination ◽  
Zinc Sulfate ◽  
Zinc Content ◽  
Chelate Complex ◽  
Molar Ratio ◽  
X Ray ◽  
Validation Parameters

Introduction. The production, standardization and quality control process of various dietary supplements containing chelated zinc requires validated quantitative assessment methods. In this work, we propose an X-ray fluorescence spectroscopy (XRF) technique for determining the zinc content in the composition of coordination compounds using the example of a synthesized chelate complex with methionine.Aim. To synthesize Zn(Met)2 chelate complex, to develop and validate a method for its quantitative analysis using the XRF method.Materials and methods. The synthesized zinc chelate complex was investigated by IR spectroscopy. The XRF method was used to develop a method for quantifying the zinc content in the synthesized complex. We used dry mixtures of zinc sulfate monohydrate and L-methionine (Met) in a molar ratio of Zn to Met – 1 : 1, 1 : 2, 1 : 4, 1 : 8 and 1 : 16 and also aqueous solutions of zinc sulfate and L-methionine in a molar ratio of Zn to Met 1 : 2 with Zn concentrations from 0.5 to 100 mmol/l as calibration standards. Complexometric titration was used as an arbitration method for the quantitative determination of zinc content in the samples under study.Results and discussion. The IR spectrum of chelate complex confirmed the presence of a donor-acceptor bond between Zn2+ and the nitrogen atom of amino group in methionine. The titration results showed chelate compounds have a composition corresponding to the stoichiometric formula Zn(Met)2. XRF analysis of dry standard mixed samples demonstrated the presence of matrix effect, that makes impossible an accurate assessment of zinc content in the chelate compound. According to the XRF spectra of aqueous solutions containing zinc sulfate and methionine in a ratio of 1 : 2 at a zinc concentration of 0.5; 1; 2; 3; 4; 5; 10; 25; 50 and 100 mmol/L, a calibration graph was constructed – the dependence of the fluorescence signal intensity for the Kα line of zinc on the concentration of zinc in the solution (r = 0.9996). The method was evaluated by the following validation parameters: specificity, linearity, correctness, precision, and analytical range. The specificity of the validated method was proven in the presence of copper, iron, and silver.Conclusion. The developed method make it possible to determine with sufficient precision and correctness the content of Zn2+ in its aqueous solutions of inorganic and organic nature by the XRF method in the concentration range from 3 to 100 mmol/l without the influence of the matrix.

scholarly journals Sorption of medical preparations by chitosan

2020 ◽  
Vol 164 ◽  
pp. 06025
Author(s):  
Anna Beliaeva ◽  
Galina Nianikova
Keyword(s):  
Quantitative Determination ◽  
Sorption Capacity ◽  
Maximum Degree ◽  
Sorption Isotherms ◽  
Sorption Process ◽  
Sorption Properties ◽  
Before And After ◽  
Static Conditions ◽  
Degree Of Sorption

The article provides information about sorption properties of crab chitosan in relation to Analgin, Aspirin, Quamatel, Mydocalm, Paracetamol, Tsifran and Phtalazol. Quantitative determination of medicines’ amount before and after sorption was performed by HPLC-MS method with the preliminary plotting of calibration curves. The sorption capacity of chitosan taken in different concentrations was determined. Sorption isotherms and kinetic curves of medications’ sorption by chitosan were plotted. It has been shown that the maximum degree of sorption in static conditions for all studied medicines was achieved within an hour after the beginning of the sorption process.

Sign in / Sign up

Export Citation Format

Share Document