scholarly journals The potential of biocarbon as CO2 adsorbent in VPSA unit

2020 ◽  
Vol 142 (1) ◽  
pp. 267-273
Author(s):  
Izabela Majchrzak-Kucęba ◽  
Marcelina Sołtysik
Keyword(s):  
Large Scale ◽  
Activated Carbons ◽  
Vacuum System ◽  
Capture Process ◽  
Solid Adsorbent ◽  
High Sorption ◽  
Repeated Use ◽  
Adsorption Desorption ◽  
Desorption Cycle ◽  
Co2 Adsorbent

Abstract The best solution to the main environmental problem seems to be CO2 capture to reduce greenhouse gas emissions. The activated carbons derived from biomass have attracted extensive attention as solid adsorbent for carbon dioxide capture process. In this work, we focus on examining the properties of biochar (non-activated porous carbon) produced from biomass. Physicochemical properties of the biochar were investigated by thermogravimetric analysis (TG), Fourier transform infrared spectroscopy, scanning electron microscopy and N2 adsorption–desorption at 77 K. In order to evaluate the possibility of using biocarbons for CO2 adsorption in large-scale VPSA units, investigations of these adsorbents in laboratory are necessary. The paper present the potential of biochar for CO2 capture in VPSA unit. The examination of the CO2 sorptive capability, stability and regeneration performance of biochar was carried out using a Mettler-Toledo TGA/SDTA 851e thermobalance and TG-Vacuum system. The sorption of CO2 was carried out isothermally in a flow of a mixture of gasses: CO2 (100 vol.%) and CO2 (16 vol.%)/N2 (84 vol.%). The commercial biochar showed a sorption performance for CO2 up to 26.4 mg CO2 g−1 adsorbent at 30 °C and 30 bar. Repeated use of the adsorbent in the sorption/desorption cycle did not affect its performance, which indicates high sorption stability.

Adsorption/Desorption Performance of CO2 on Pitch-based Spherical Activated Carbons

2011 ◽  
Vol 26 (2) ◽  
pp. 149-154 ◽  
Author(s):  
Fei XIE ◽  
Yan Li WANG ◽  
Liang ZHAN ◽  
Ming GE ◽  
Xiao-Yi LIANG ◽  
...  
Keyword(s):  
Activated Carbons ◽  
Adsorption Desorption

Water-soluble polymeric particle embedded cryogels: Synthesis, characterisation and adsorption of haemoglobin

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Kadir Erol ◽  
Melda Bolat Bülter ◽  
Dursun Ali Köse ◽  
Hatice Kaplan Can
Keyword(s):  
Copper Ions ◽  
Langmuir Model ◽  
Water Soluble ◽  
Hydroxyethyl Methacrylate ◽  
Adsorption Ability ◽  
Adsorption Interaction ◽  
Polymeric Particle ◽  
Adsorption Desorption ◽  
Desorption Cycle ◽  
Soluble Poly

Abstract Making cryogels, which are among today’s accepted adsorbents, more functional with different methods, has been one of the subjects spent overtime. In this study, water-soluble poly(maleic anhydride-alt-acrylic acid) polymer embedded in poly(2-hydroxyethyl methacrylate) cryogels. Copper ions were then immobilised to this structure, and this polymer was used for adsorption of haemoglobin from aqueous systems. Adsorption interaction was carried out on an electrostatic basis, and approximately 448.62 mg haemoglobin/g polymer adsorption capacity value was obtained. It was found that the same material has managed to maintain its adsorption ability by 90.3% even after the use of it five times in the adsorption/desorption cycle. The adsorption interaction was determined to be appropriate for the Langmuir model by isotherm studies. The change in Gibbs free energy value was calculated as −2.168 kJ/mol.

Removal of Cu, Fe, and Zn from Peat Water by Using Activated Carbon Derived from Oil Palm Leaves

2021 ◽  
Vol 1162 ◽  
pp. 65-73
Author(s):  
Rakhmawati Farma ◽  
Ona Lestari ◽  
Erman Taer ◽  
Apriwandi ◽  
Minarni ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Activated Carbon ◽  
Oil Palm ◽  
Activated Carbons ◽  
Nitrogen Adsorption ◽  
Surface Characteristics ◽  
Batch Adsorption ◽  
X Ray ◽  
Turbidity Level ◽  
Adsorption Desorption

Heavy metal such as Cu, Fe, and Zn are the most serious contributers to environmental problems. The removal of heavy metal from the environment is the research interest nowdays. The adsorption of Cu, Fe and Zn from wastewater was investigated with various activated carbons as adsorbents. The activated carbons were produced from oil palm leaves by using multi-activation methods. The H3PO4, NaOH, ZnCl2 and KOH were chosen as chemical activating agents. Batch adsorption experiment was used to test the ability of activated carbon to remove Cu, Fe, and Zn from wastewater. The surface characteristics of activated carbon were evaluated using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR), and nitrogen adsorption-desorption isotherms. The Activated carbons were able to purify wastewater with a maximum turbidity level of 2.83 NTU. The AC-H3PO4 activated carbon showed the highest absorbability of Cu metal as 91.540%, while the highest absorbabilities of Zn and Fe metals were indicated by AC-KOH activated carbon of 22.853% and 82.244% absorption respectively. Therefore, these results enable the oil palm leaves to become a high potential for activated carbon as removal the heavy metals.

scholarly journals Immobilization of Isocitrate Dehydrogenase on Mesoporous Silica Foam for Carbon Dioxide Capture

2019 ◽  
Vol 93 ◽  
pp. 04001
Author(s):  
Shunxiang Xia ◽  
Laibao Zhang ◽  
Enjelia Veony
Keyword(s):  
Enzyme Activity ◽  
Mesoporous Silica ◽  
Isocitrate Dehydrogenase ◽  
Carbon Capture ◽  
Large Scale ◽  
Enzyme Stability ◽  
Environmental Parameters ◽  
Capture Process ◽  
Dehydrogenase Reaction ◽  
Improved Stability

Carbon capture can be realized effectively through isocitrate dehydrogenase reaction and the reaction rate was strongly affected by the environmental parameters such as pH and temperature. Enzyme immobilization was conducted to improve the enzyme stability during the capture process. By simply adsorbing enzyme on the surface of mesoporous silica foam, enzyme stability against temperature, pH and shear stress was improved. The immobilization process can be completed in 5 mins, and 0.87 U enzyme activity was kept for each gram of immobilization material. After 10 cycles, more than 50 percent of enzyme activity remained. The reusability and improved stability made immobilized ICDH a better candidate for large-scale application of carbon capture.

scholarly journals Experiments with CO<sub>2</sub>-in-air reference gases in high-pressure aluminum cylinders

2018 ◽  
Vol 11 (10) ◽  
pp. 5565-5586 ◽  
Author(s):  
Michael F. Schibig ◽  
Duane Kitzis ◽  
Pieter P. Tans
Keyword(s):  
High Pressure ◽  
Large Scale ◽  
High Pressures ◽  
Co2 Enrichment ◽  
Low Flow ◽  
Cylinder Wall ◽  
Practical Applications ◽  
Sources And Sinks ◽  
Carbon Dioxide Co2 ◽  
Adsorption Desorption

Abstract. Long-term monitoring of carbon dioxide (CO2) in the atmosphere is key for a better understanding of the processes involved in the carbon cycle that have a major impact on further climate change. Keeping track of large-scale emissions and removals (sources and sinks) of CO2 requires very accurate measurements. They all have to be calibrated very carefully and have to be traceable to a common scale, the World Meteorological Organization (WMO) CO2 X2007 scale, which is maintained by the National Oceanic and Atmospheric Administration (NOAA) Earth System Research Laboratory (ESRL) in Boulder, CO, USA. The international WMO GAW (Global Atmosphere Watch) program sets as compatibility goals for the required agreement between different methods and laboratories ±0.1 µmol mol−1 for the Northern Hemisphere and ±0.05 µmol mol−1 for the Southern Hemisphere. The reference gas mixtures used to pass down and distribute the scale are stored in high-pressure aluminum cylinders. It is crucial that the standards remain stable during their entire time of use. In this study the tested vertically positioned aluminum cylinders showed similar CO2 enrichment during low-flow conditions (0.3 L min−1), which are similar to flows often used for calibration gases in practical applications. The average CO2 enrichment was 0.090±0.009 µmol mol−1 as the cylinder was emptied from about 150 to 1 bar above atmosphere. However, it is important to note that the enrichment is not linear but follows Langmuir's adsorption–desorption model, where the CO2 enrichment is almost negligible at high pressures but much more pronounced at low pressures. When decanted at a higher rate of 5.0 L min−1 the enrichment becomes 0.22±0.05 µmol mol−1 for the same pressure drop. The higher enrichment is related to thermal diffusion and fractionation effects in the cylinder, which were also dependent on the cylinder's orientation and could even turn negative. However, the low amount of CO2 adsorbed on the cylinder wall and the fact that the main increase happens at low pressure lead to the conclusion that aluminum cylinders are suitable to store ambient CO2-in-dry-air mixtures provided they are not used below 20 bar. In cases where they are used in high-flow experiments that involve significant cylinder temperature changes, special attention has to be paid to possible fractionation effects.

scholarly journals Activated Carbon from Winemaking Waste: Thermoeconomic Analysis for Large-Scale Production

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6462
Author(s):  
Isaac Lorero ◽  
Arturo J. Vizcaíno ◽  
Francisco J. Alguacil ◽  
Félix A. López
Keyword(s):  
Activated Carbon ◽  
Heat Exchangers ◽  
Large Scale ◽  
Activated Carbons ◽  
Hydrothermal Carbonization ◽  
Thermodynamic Efficiency ◽  
Physical Activation ◽  
Scale Production ◽  
Production Scale ◽  
Costs Analysis

An activated carbon manufacturing process from winemaking waste is analyzed. In that way, vine shoots conversion is studied as a basis for plant designing, and mass and energy balances of hydrothermal carbonization and physical activation are fulfilled. To develop an energy-integrated plant, a network of heat exchangers is allocated to recover heat waste, and a cogeneration cycle is designed to provide electricity and remaining heat process demands. Furthermore, thermoeconomic analysis is applied to determine the thermodynamic efficiency and the economic viability of the plant. Energy balance indicates that heat exchangers energy integration covers 48.9% of the overall demands by crossing hot and cold streams and recovering heat from residual flue gas. On the other hand, the exergy costs analysis identifies combustion of pruning wood as the main source of exergy destruction, confirming the suitability of the integration to improve the thermodynamic performance. Attending to economic costs analysis, production scale and vineyard pruning wood price are identified as a critical parameter on process profitability. With a scale of 2.5 ton/h of pruning wood carbonization, a break-event point to compete with activated carbons from biomass origin is reached. Nevertheless, cost of pruning wood is identified as another important economic parameter, pointing out the suitability of wet methods such as hydrothermal carbonization (HTC) to treat them as received form the harvest and to contribute to cutting down its prices.

Sign in / Sign up

Export Citation Format

Share Document