Influence of bitumen type and polymer dosage on the relaxation spectrum of styrene-butadiene-styrene (SBS)/styrene-butadiene (SB) modified bitumen

2022 ◽  
Author(s):  
M. R. Nivitha ◽  
R. Devika ◽  
J. Murali Krishnan ◽  
Neethu Roy
Keyword(s):  
Relaxation Spectrum ◽  
Modified Bitumen ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

The modification of bitumen with styrene–butadiene–styrene, ethylene vinyl acetate and varying the amount of reactive ethylene terpolymer

2017 ◽  
Vol 50 (3) ◽  
pp. 241-255 ◽  
Author(s):  
Seyfullah Keyf
Keyword(s):  
Vinyl Acetate ◽  
Softening Point ◽  
Elastic Recovery ◽  
Ethylene Vinyl Acetate ◽  
Modified Bitumen ◽  
Penetration Index ◽  
Different Types ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

In this article, 50/70 penetration grade TUPRAS bitumen was modified. Reactive elastomeric terpolymer (Elvaloy RET; DuPont Company), ethylene vinyl acetate (EVA) and styrene–butadiene–styrene (SBS) polymers were used in bitumen modification. Set hours of the tests were applied to samples taken from the obtained modified bitumen mixture. Varying amount of reactive ethylene terpolymer with weight ratios of 0.5%, 1.0%, 1.5%, 2.0% and 2.5% were introduced to the mixture of raw bitumen with 1.0% SBS and 1.0% EVA. Penetration, penetration index, softening point, ductility and elastic recovery tests were performed with these modified bitumen and raw bitumen. The samples of raw bitumen and modified bitumens of 2.0% Elvaloy RET, 1.0% SBS and 1.0% EVA were investigated by means of IR spectroscopy. The raw bitumen was modified with SBS, EVA and RET, and it was determined that penetration and ductility values were decreased while penetration index, softening point and elastic recovery were increased. The purpose of this study is to research the improving properties of 50/70 penetration grade–modified bitumen used in highways of Turkey. The most important characteristics (such as softening point, penetration and % elastic recovery) of new polymer-modified bitumen (NPMB) containing 2.5% EVA, 1% RET and 1% SBS were compared with eight different types of polymer-modified bitumens in Turkey (TPMB). NPMB provided all required parameters (softening point, penetration and % elastic recovery) for five different types of TPMBs (TPMB 70-16, TPMB 70-22, TPMB 76-16, TPMB 76-22 and TPMB 82-16).

scholarly journals Evolution of Rheological Behaviors of Styrene-Butadiene-Styrene/Crumb Rubber Composite Modified Bitumen after Different Long-Term Aging Processes

Materials ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2345 ◽  
Author(s):  
Yangsheng Ye ◽  
Gang Xu ◽  
Liangwei Lou ◽  
Xianhua Chen ◽  
Degou Cai ◽  
...  
Keyword(s):  
Low Temperature ◽  
High Speed ◽  
Crumb Rubber ◽  
Modified Bitumen ◽  
High Speed Railway ◽  
Modified Asphalt ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

In this study, a new type of composite modified bitumen was developed by blending styrene-butadiene-styrene (SBS) and crumb rubber (CR) with a chemical method to satisfy the durability requirements of waterproofing material in the waterproofing layer of high-speed railway subgrade. A pressure-aging-vessel test for 20, 40 and 80 h were conducted to obtain bitumen samples in different long-term aging conditions. Multiple stress creep recovery (MSCR) tests, linear amplitude scanning tests and bending beam rheometer tests were conducted on three kinds of asphalt binders (SBS modified asphalt, CR modified asphalt and SBS/CR composite modified asphalt) after different long-term aging processes, including high temperature permanent deformation performance, resistance to low temperature thermal and fatigue crack. Meanwhile, aging sensitivities were compared by different rheological indices. Results showed that SBS/CR composite modified asphalt possessed the best properties before and after aging. The elastic property of CR in SBS/CR composite modified asphalt improved the ability to resist low temperature thermal and fatigue cracks at a range of low and middle temperatures. Simultaneously, the copolymer network of SBS and CR significantly improved the elastic response of the asphalt SBS/CR modified asphalt at a range of high temperatures. Furthermore, all test results indicated that the SBS/CR modified asphalt possesses the outstanding ability to anti-aging. SBS/CR is an ideal kind of asphalt to satisfy the demand of 60 years of service life in the subgrade of high speed railway.

Effect of montmorillonite on properties of styrene–butadiene–styrene copolymer modified bitumen

2007 ◽  
Vol 47 (9) ◽  
pp. 1289-1295 ◽  
Author(s):  
Jianying Yu ◽  
Lin Wang ◽  
Xuan Zeng ◽  
Shaopeng Wu ◽  
Bin Li
Keyword(s):  
Modified Bitumen ◽  
Styrene Copolymer ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

scholarly journals Study on Styrene-Butadiene-Styrene Modified Asphalt Binders Relaxation at Low Temperature

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2888
Author(s):  
Sylwia Dziadosz ◽  
Mieczysław Słowik ◽  
Filip Niwczyk ◽  
Marcin Bilski
Keyword(s):  
Low Temperature ◽  
Force Measurement ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Short Term ◽  
Modified Bitumen ◽  
Modified Asphalt ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

The paper presents the results of laboratory investigation on asphalt binders relaxation at low temperature, carried out in a ductilometer using the tensile test with continuous force measurement. Polymer modified asphalt binder samples consisting of a 50/70 penetration grade bitumen mixed with a concentrate of styrene-butadiene-styrene (SBS) modified bitumen—a 160/220 penetration grade bitumen modified with a SBS copolymer in the amount of 9%—were tested. Therefore, polymer modified binders containing 3%, 4.5%, 6% and 7.5% SBS, respectively, were obtained and investigated. Tensile tests were performed at −16 °C on samples before aging and subjected to short-term aging (RTFOT). Test results in the form of relaxation curves have been mathematically described using a modified generalized Maxwell model. Based on the acquired results, it was shown that the increase of the SBS copolymer content in asphalt binder precipitates the relaxation process, while aging slows down this phenomenon. It has also been proven that with increased content of SBS elastomer in asphalt binder, the effect of short-term aging on binder’s stress relaxation ability at low temperatures is reduced.

scholarly journals Rheological and Aging Properties of Composite Modified Bitumen by Styrene–Butadiene–Styrene and Desulfurized Crumb Rubber

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3037
Author(s):  
Gang Xu ◽  
Yunhong Yu ◽  
Jingyao Yang ◽  
Tianling Wang ◽  
Peipei Kong ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Elution Curve ◽  
Gel Permeation Chromatography ◽  
Crumb Rubber ◽  
Creep Recovery ◽  
Modified Bitumen ◽  
Aging Properties ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

Taking advantage of crumb rubber from waste tires to modify bitumen is widely for the environmentally friendly and sustainable development of pavement. This study investigated the modification mechanism, rheological, and aging properties of styrene–butadiene–styrene (SBS)/desulfurized crumb rubber (DCR) composite modified bitumen (SBS/DCRMB). Morphological features and chemical characteristics were assessed by fluorescence intensity measurement and gel permeation chromatography (GPC), respectively, and results demonstrated that the DCR and SBS modifier in SBS/DCRMB had been vulcanized and formed a three-dimensional network structure. Moreover, a comparison of the GPC elution curve showed the residual bitumen hardly changed due to carbon black released from DCR of SBS/DCRMB during the aging process of SBS/DCRMB, and the polymer molecules condensed to larger units. However, the remaining bitumen in SBSMB had changed evidently and the polymer degraded to smaller molecules. Meanwhile the rheological testing results, including multiple stress creep recovery, linear amplitude sweep and bending beam rheometer, declared that the SBS/DCRMB is superior to SBSMB before and after aging.

Sign in / Sign up

Export Citation Format

Share Document