Performance optimization of bi-metallic surface plasmon resonance based sensors with silicon layer using poynting vector analysis

2021 ◽  
Vol 53 (10) ◽  
Author(s):  
Himanshu Kushwah ◽  
Jagneet Kaur Anand
2020 ◽  
Vol 18 (9) ◽  
pp. 711-718
Author(s):  
Rashmi Tiwari ◽  
Sachin Singh ◽  
R. K. Yadav ◽  
Pooja Lohia ◽  
D. K. Dwivedi

After the discovery of graphene in 2004, two-dimensional materials have attracted attention at large scale because of their peculiar structure and extraordinary properties. As they have large potential in future nano electronics, two-dimensional transition metal dichalcogenides has become most focus topic of study. Transition metal dichalcogenides with tunable finite band gap and significant transitional behavior are much suitable for the construction of electronic and optoelectronic devices of high-performance. However, platinum diselenide is group-10 transition metal dichalcogenides which occur naturally in one phase transition, which has been theoretically predicted as an excellent material. The proposed structure of surface plasmon resonance (SPR) -based biosensor consists of a silicon and two-dimensional nanomaterial platinum diselenide. The performance parameters of proposed biosensor (surface plasmon resonance-based) such as detection accuracy, figure of merit, sensitivity, full width at half maximum have been investigated. The sensitivity, detection accuracy, full width half maximum and figure of merit of proposed surface plasmon resonance biosensor having silver (50 nm), silicon (2 nm) and one layer of platinum diselenide with 2 nm thickness at 633 nm wavelength is 2200RIU–1 , 0.20 deg–1, 4.980 and 44.22 RIU–1 respectively. Silicon sheet is used in the middle of the Ag and platinum diselenide to prevent the oxidation of silver and enhance the sensitivity of platinum diselenide based surface plasmon resonance biosensor. The sensitivity of conventional surface plasmon resonance biosensor and the proposed surface plasmon resonance biosensor without silicon layer is 1700RIU–1 and 2000RIU–1 respectively. Surface plasmon resonance biosensor of device structure CaF2/Ag/Si/PtSe2 has higher sensitivity in comparison to device structures CaF2/Ag (conventional) and CaF2/Ag/PtSe2 (without Silicon Layer) by 29.41% and 10% respectively. Although the highest sensitivity obtained is 2620RIU–1 for 60 nm silver with 3 nm silicon layer except the platinum diselenide layer.


Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3295 ◽  
Author(s):  
Kaiwei Li ◽  
Wenchao Zhou ◽  
Shuwen Zeng

Integration of functional nanomaterials with optical micro/nanofibers (OMNFs) can bring about novel optical properties and provide a versatile platform for various sensing applications. OMNFs as the key element, however, have seldom been investigated. Here, we focus on the optimization of fiber diameter by taking micro/nanofiber-based localized surface plasmon resonance sensors as a model. We systematically study the dependence of fiber diameter on the sensing performance of such sensors. Both theoretical and experimental results show that, by reducing fiber diameter, the refractive index sensitivity can be significantly increased. Then, we demonstrate the biosensing capability of the optimized sensor for streptavidin detection and achieve a detection limit of 1 pg/mL. Furthermore, the proposed theoretical model is applicable to other nanomaterials and OMNF-based sensing schemes for performance optimization.


This chapter discusses the unique and novel properties of 2D materials useful for toxic gas and biosensing applications. The work presented in this chapter mainly focuses on latest research done on 2D materials related to toxic gas and biosensing for surface plasmon resonance based sensors. Here, we proposed a surface plasmon resonance sensor utilizing P3OT thin films which can sense different concentration of NO2 gas. The performance of proposed design is evaluated by calculating sensitivity, detection accuracy and quality factor, with and without use of silicon layer. Sensitivity of proposed sensor increases by using silicon.


Photonics ◽  
2021 ◽  
Vol 8 (12) ◽  
pp. 547
Author(s):  
Satyendra Kumar Mishra ◽  
Rajneesh Kumar Verma ◽  
Akhilesh Kumar Mishra

A versatile sensing scheme for gas and biomolecule detection has been proposed theoretically using optimized GaP/Au/Graphene/Silicon structures. A Gallium Phosphide (GaP) prism is used as a substrate in the proposed surface plasmon resonance based sensing scheme, which is designed to be in Kretschmann configuration. The thicknesses of different constituent layers have been optimized for the maximum values of the sensitivities of the gas and bio-sensing probes. To delineate the role of the silicon layer, sensing probes without a silicon layer have also been numerically modelled and compared. The present GaP/Au/Graphene/Silicon probes possess higher values of sensitivity for the detection of gas and biomolecules compared to the conventional SPR sensing probes reported in the literature.


Sensors ◽  
2019 ◽  
Vol 19 (15) ◽  
pp. 3354 ◽  
Author(s):  
Joyce Ibrahim ◽  
Mostafa Al Masri ◽  
Isabelle Verrier ◽  
Thomas Kampfe ◽  
Colette Veillas ◽  
...  

The aim of this work is to measure the temperature variations by analyzing the plasmon signature on a metallic surface that is periodically structured and immersed in a liquid. A change in the temperature of the sample surface induces a modification of the local refractive index leading to a shift of the surface plasmon resonance (SPR) frequency due to the strong interaction between the evanescent electric field and the metallic surface. The experimental set-up used in this study to detect the refractive index changes is based on a metallic grating permitting a direct excitation of a plasmon wave, leading to a high sensibility, high-temperature range and contactless sensor within a very compact and simple device. The experimental set-up demonstrated that SPR could be used as a non-invasive, high-resolution temperature measurement method for metallic surfaces.


2015 ◽  
Vol 47 (11) ◽  
pp. 3599-3611 ◽  
Author(s):  
J. B. Maurya ◽  
Y. K. Prajapati ◽  
V. Singh ◽  
J. P. Saini ◽  
Rajeev Tripathi

Sign in / Sign up

Export Citation Format

Share Document