Structure and Properties of Nanocrystalline Iron Oxide Powder Prepared by the Method of Pulsed Laser Ablation

2017 ◽  
Vol 59 (12) ◽  
pp. 2012-2016 ◽  
Author(s):  
V. A. Svetlichnyi ◽  
A. V. Shabalina ◽  
I. N. Lapin
Keyword(s):  
Iron Oxide ◽  
Laser Ablation ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Oxide Powder ◽  
Structure And Properties ◽  
Nanocrystalline Iron

Fabrication of Iron Oxide Nanoparticles by Pulsed-Laser Ablation

1998 ◽  
Vol 526 ◽  
Author(s):  
Takeshi Sasaki ◽  
Xiaoyan Zeng ◽  
Naoto Koshizaki
Keyword(s):  
Iron Oxide ◽  
Laser Ablation ◽  
Ambient Pressure ◽  
Pulsed Laser ◽  
Aggregate Size ◽  
Pulsed Laser Ablation ◽  
Normal Distribution Function ◽  
Carbon Coated ◽  
Size And Morphology ◽  
Log Normal

AbstractNanoparticles of iron oxide were prepared by pulsed laser ablation on carbon coated mica substrates. An ArF excimer laser was used to irradiate a Fe2O3 target in atmospheres of Ar at room temperature. The effects of ambient pressure on size and morphology of nanoparticles were investigated using transmission electron microscopy. The morphology of the deposited nanoparticles was strongly dependent on the ablation pressure. The formations of nanoparticles and their aggregates were observed at pressures higher than 46.7 Pa and 267 Pa of Ar, respectively. The size of the primary nanoparticles ranged from 2 – 9 nm and their size distribution agreed with a log-normal distribution function. The aggregate size increased with ambient pressure and the primary particle size was independent of ambient pressure.

Deposition of Borocarbides Thin Films by Pulsed Laser Ablation: Growth Parameters and Characterization

1999 ◽  
Vol 13 (09n10) ◽  
pp. 1049-1054 ◽  
Author(s):  
C. Ferdeghini ◽  
M.R. Cimberle ◽  
G. Grassano ◽  
D. Marre ◽  
M. Putti ◽  
...  
Keyword(s):  
Thin Films ◽  
Laser Ablation ◽  
Growth Parameters ◽  
High Vacuum ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Film Structure ◽  
Ultra High Vacuum ◽  
Structure And Properties ◽  
Deposition Parameters

In this paper we report results on the growth of borocarbides ErNi 2 B 2C and DyNi 2 B 2 C thin films by an ultra high vacuum laser ablation technique. The dependence of the film structure and properties on the deposition parameters has been studied. Moreover the possibility to obtain superconducting films with a tungsten buffer layer on MgO substrates has been successfully checked. Here we present details on the deposition procedure as well as on the structural, morphological, and physical characterization.

scholarly journals Synthesis of Iron Oxide Nanostructures via Carbothermal Reaction of Fe Microspheres Generated by Infrared Pulsed Laser Ablation

Coatings ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 179 ◽  
Author(s):  
Jeffrey De Vero ◽  
Alladin Jasmin ◽  
Lean Dasallas ◽  
Wilson Garcia ◽  
Roland Sarmago
Keyword(s):  
Iron Oxide ◽  
Laser Ablation ◽  
Self Assembly ◽  
Driving Force ◽  
Deposition Time ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Compressive Stresses ◽  
Oxide Nanostructures ◽  
Iron Oxide Nanostructures

Iron oxide nanostructures were synthesized using the carbothermal reaction of Fe microspheres generated by infrared pulsed laser ablation. The Fe microspheres were successfully deposited on Si(100) substrates by laser ablation of the Fe metal target using Nd:YAG pulsed laser operating at λ = 1064 nm. By varying the deposition time (number of pulses), Fe microspheres can be prepared with sizes ranging from 400 nm to 10 µm. Carbothermal reaction of these microspheres at high temperatures results in the self-assembly of iron oxide nanostructures, which grow radially outward from the Fe surface. Nanoflakes appear to grow on small Fe microspheres, whereas nanowires with lengths up to 4.0 μm formed on the large Fe microspheres. Composition analyses indicate that the Fe microspheres were covered with an Fe3O4 thin layer, which converted into Fe2O3 nanowires under carbothermal reactions. The apparent radial or outward growth of Fe2O3 nanowires was attributed to the compressive stresses generated across the Fe/Fe3O4/Fe2O3 interfaces during the carbothermal heat treatment, which provides the chemical driving force for Fe diffusion. Based on these results, plausible thermodynamic and kinetic considerations of the driving force for the growth of Fe2O3 nanostructures were discussed.

Study of iron oxide magnetic nanoparticles obtained via pulsed laser ablation of iron in air

2018 ◽  
Vol 462 ◽  
pp. 226-236 ◽  
Author(s):  
Valery A. Svetlichnyi ◽  
Anastasiia V. Shabalina ◽  
Ivan N. Lapin ◽  
Darya A. Goncharova ◽  
Dmitry A. Velikanov ◽  
...  
Keyword(s):  
Iron Oxide ◽  
Magnetic Nanoparticles ◽  
Laser Ablation ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Iron Oxide Magnetic Nanoparticles

TEM study of thin iron oxide films deposited by pulsed-laser ablation

1991 ◽  
Vol 49 ◽  
pp. 780-781
Author(s):  
Ian M. Anderson ◽  
M. Grant Norton ◽  
C. Barry Carter
Keyword(s):  
Iron Oxide ◽  
Laser Ablation ◽  
Oxide Films ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Temperature Oxidation ◽  
Hexagonal Close Packed ◽  
Transmission Electron ◽  
Oxygen Sublattices ◽  
Iron Oxide Films

Iron-oxide-based compounds are of technological interest because of their unique magnetic properties. Thin films of these compounds are especially suited to applications such as magnetic recording devices. The binary Fe-O system provides a model for the study of iron-oxide-based compounds, since the multiple valence of the Fe cations permits the formation of phases having a variety of crystal structures. These structures include rock salt (wüstite, Fe1-δO), two spinels (magnetite, Fe3O4 and maghemite, γ-Fe2O3), and corundum (hematite, α-Fe2O3). The former three phases have cubic-close-packed oxygen sublattices, while the latter has a hexagonal-close-packed oxygen sublattice. The γ-Fe2O3 phase is a metastable, cation-deficient spinel, generally formed by careful low-temperature oxidation of the magnetite phase.Thin iron oxide films have been deposited by pulsed-laser ablation onto (001)-oriented MgO single-crystal substrates. The microstructure and epitaxy of these films have been studied using transmission electron microscopy (TEM) and selected-area diffraction (SAD).

Iron Oxide Nanopowders Obtained via Pulsed Laser Ablation, for Supercapacitors

2020 ◽  
Vol 65 (2) ◽  
pp. 271-278
Author(s):  
A. V. Shabalina ◽  
D. O. Sharko ◽  
D. R. Korsakova ◽  
V. A. Svetlichnyi
Keyword(s):  
Iron Oxide ◽  
Laser Ablation ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation
Sign in / Sign up

Export Citation Format

Share Document