Performance of Carboxyl Groups in Chemical Mechanical Polishing of GCr15 Bearing Steel: Effects of Carbon Chain Length and pH

2021 ◽  
Vol 69 (4) ◽  
Author(s):  
Jinwei Liu ◽  
Liang Jiang ◽  
Hanqiang Wu ◽  
Xia Zhong ◽  
Linmao Qian
Friction ◽  
2020 ◽  
Author(s):  
Hanqiang Wu ◽  
Liang Jiang ◽  
Xia Zhong ◽  
Jinwei Liu ◽  
Na Qin ◽  
...  

AbstractEthylenediamine with two −NH2 functional groups was used as a critical complexing agent in chemical mechanical polishing (CMP) slurries for a high carbon chromium GCr15 bearing steel (equivalent to AISI 52100). The polishing performance and corresponding mechanism of −NH2 functional groups were thoroughly investigated as a function of pH. It is revealed that, when polished with ethylenediamine and H2O2-based slurries, the material removal rate (MRR) and surface roughness Ra of GCr15 steel gradually decrease as pH increases. Compared with acidic pH of 4.0, at alkaline pH of 10.0, the surface film of GCr15 steel has much higher corrosion resistance and wear resistance, and thus the material removal caused by the pure corrosion and corrosion-enhanced wear are greatly inhibited, resulting in much lower MRR and Ra. Moreover, it is confirmed that a more protective composite film, consisting of more Fe3+ hydroxides/oxyhydroxides and complex compounds with −NH2 functional groups of ethylenediamine, can be formed at pH of 10.0. Additionally, the polishing performance of pure iron and a medium carbon 45 steel exhibits a similar trend as GCr15 steel. The findings suggest that acidic pH could be feasible for amine groups-based complexing agents to achieve efficient CMP of iron-based metals.


2021 ◽  
Vol 51 (5) ◽  
pp. 803-814
Author(s):  
Ting Zhao ◽  
Liang Jiang ◽  
Jinwei Liu ◽  
Hanqiang Wu ◽  
Na Qin ◽  
...  

2021 ◽  
pp. 117119
Author(s):  
Mansoor Ul Hassan Shah ◽  
Ambavaram Vijaya Bhaskar Reddy ◽  
Suzana Yusup ◽  
Masahiro Goto ◽  
Muhammad Moniruzzaman

2021 ◽  
Author(s):  
Liwen Zeng ◽  
Kong-qiu Hu ◽  
Zhi-wei Huang ◽  
Lei Mei ◽  
Xianghe Kong ◽  
...  

Herein, we report a new uranyl-organic polyhedron U4L4 (L=BTPCA) assembled from uranyl and a semirigid tritopic ligand. By adjusting the carbon chain length of the organic templates, two complexes can...


2014 ◽  
Vol 82 ◽  
pp. 172-180 ◽  
Author(s):  
En-Jun Gao ◽  
Hong Fu ◽  
Ming-Chang Zhu ◽  
Chi Ma ◽  
Shi-Kai Liang ◽  
...  

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 467
Author(s):  
Shahla S. Smail ◽  
Mowafaq M. Ghareeb ◽  
Huner K. Omer ◽  
Ali A. Al-Kinani ◽  
Raid G. Alany

Nanoemulsions (NE) are isotropic, dispersions of oil, water, surfactant(s) and cosurfactant(s). A range of components (11 surfactants, nine cosurfactants, and five oils) were investigated as potential excipients for preparation of ketorolac tromethamine (KT) ocular nanoemulsion. Diol cosurfactants were investigated for the effect of their carbon chain length and dielectric constant (DEC), Log P, and HLB on saturation solubility of KT. Hen’s Egg Test—ChorioAllantoic Membrane (HET-CAM) assay was used to evaluate conjunctival irritation of selected excipients. Of the investigated surfactants, Tween 60 achieved the highest KT solubility (9.89 ± 0.17 mg/mL), followed by Cremophor RH 40 (9.00 ± 0.21 mg/mL); amongst cosurfactants of interest ethylene glycol yielded the highest KT solubility (36.84 ± 0.40 mg/mL), followed by propylene glycol (26.23 ± 0.82 mg/mL). The solubility of KT in cosurfactants was affected by four molecular descriptors: carbon chain length, DEC, log P and HLB. KT solubility was directly proportional to DEC and the HLB yet, inversely proportional to carbon chain length and log P. All surfactants, except Labrasol ALF, were non-irritant. The majority of cosurfactants were slightly irritant, butylene glycol was a moderate irritant, pentylene and hexylene glycols were strong irritants. These findings will inform experiments aimed at developing NE formulations for ocular administration of KT.


1996 ◽  
Vol 1996 ◽  
pp. 98-98
Author(s):  
B M L McLean ◽  
R W Mayes ◽  
F D DeB Hovell

Alkanes occur naturally in all plants, although forage crops tend to have higher alkane contents than cereals. N-alkanes have odd-numbered carbon chains. They are ideal for use as markers in feed trials, because, they are inert, indigestible and naturally occurring, and can be recovered in animal faeces. Synthetic alkanes (even-numbered carbon chains) are available commercially and can also used as external markers. Dove and Mayes (1991) cite evidence indicating that faecal recovery of alkanes in ruminants increases with increasing carbon-chain length. Thus the alkane “pairs” (e.g. C35 & C36, and C32 & C33) are used in calculating intake and digestibility because they are long chain and adjacent to each other. However, recent work by Cuddeford and Mayes (unpublished) has found that in horses the faecal recovery rates are similar regardless of chain lengths.


Sign in / Sign up

Export Citation Format

Share Document