A Study for Initial Solidification of Sn-Pb Alloy During Continuous Casting: Part II. Effects of Casting Parameters on Initial Solidification and Shell Surface

2014 ◽  
Vol 45 (3) ◽  
pp. 1048-1056 ◽  
Author(s):  
Dong Zhou ◽  
Wanlin Wang ◽  
Haihui Zhang ◽  
Fanjun Ma ◽  
Ken Chen ◽  
...  
Keyword(s):  
Continuous Casting ◽  
Shell Surface ◽  
Initial Solidification

scholarly journals Influence of M-EMS on Fluid Flow and Initial Solidification in Slab Continuous Casting

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3681
Author(s):  
Guoliang Liu ◽  
Haibiao Lu ◽  
Bin Li ◽  
Chenxi Ji ◽  
Jiangshan Zhang ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Flow Field ◽  
Continuous Casting ◽  
Casting Speed ◽  
Liquid Pool ◽  
Industrial Test ◽  
Magnetic Flux Density ◽  
Continuous Casting Mold ◽  
Slab Continuous Casting ◽  
Initial Solidification

A mathematical model coupled with electromagnetic field has been developed to simulate the transient turbulence flow and initial solidification in a slab continuous casting mold under different electromagnetic stirring (EMS) currents and casting speeds. Through comparing the magnetic flux density, flow field with measured results, the reliability of the mathematical model is proved. The uniform index of solidified shell thickness has been introduced to judge the uniformity of the solidified shell. The results show that a horizonal recirculation flow has been generated when EMS is applied, and either accelerated or decelerated regions of flow field are formed in the liquid pool. Large EMS current and low casting speed may cause the plug flow near the mold narrow face and a suitable EMS current can benefit to the uniform growth of solidified shell. Meanwhile, an industrial test exhibits that EMS can weaken the level fluctuation and number density of inclusion. Overall, a rational EMS current range is gained, when the casting speed is 1.2 m/min, the rational EMS current is 500–600 A.

The Effect of Temperature Fluctuation on the Formation of Billet Surface Defect in the Initial Solidification Area

2010 ◽  
Vol 148-149 ◽  
pp. 163-167
Author(s):  
Xiao Li Jin ◽  
Zuo Sheng Lei ◽  
Kang Deng ◽  
Zhong Ming Ren
Keyword(s):  
Continuous Casting ◽  
Temperature Fluctuation ◽  
Surface Defects ◽  
Casting Process ◽  
Effect Of Temperature ◽  
Billet Surface ◽  
Maximum Value ◽  
Key Factor ◽  
Oscillation Marks ◽  
Initial Solidification

The heat transfer in steel continuous casting process under mold oscillation was calculated, and temperature fluctuation phenomena was found in the initial solidification area, the maximum value was approximate 16 °C. The effect of different continuous casting parameters on temperature fluctuation were analyzed, and the temperature fluctuation was considered to be a key factor to the formation of oscillation marks. The Index of Temperature Fluctuation(ITF) was proposed to predict the effect of temperature fluctuation on the formation of billet surface defects.

scholarly journals The Shell Surface Force Caused by Mould Friction during Slab Continuous Casting

2008 ◽  
Vol 48 (2) ◽  
pp. 170-174 ◽  
Author(s):  
Zang Xinyang ◽  
Wang Xudong ◽  
Ma Yong ◽  
Yao Man ◽  
Zhang Li ◽  
...  
Keyword(s):  
Continuous Casting ◽  
Surface Force ◽  
Shell Surface ◽  
Slab Continuous Casting ◽  
Mould Friction

Deformation and Structure Difference of Steel Droplets during Initial Solidification

2017 ◽  
Vol 36 (4) ◽  
pp. 347-357 ◽  
Author(s):  
Yang Li ◽  
Jing Wang ◽  
Jiaquan Zhang ◽  
Changgui Cheng ◽  
Zhi Zeng
Keyword(s):  
Carbon Steel ◽  
Continuous Casting ◽  
High Carbon Steel ◽  
Low Carbon Steel ◽  
Carbon Steels ◽  
Solidification Structure ◽  
Low Carbon ◽  
High Carbon ◽  
Peritectic Steel ◽  
Initial Solidification

AbstractThe surface quality of slabs is closely related with the initial solidification at very first seconds of molten steel near meniscus in mold during continuous casting. The solidification, structure, and free deformation for given steels have been investigated in droplet experiments by aid of Laser Scanning Confocal Microscope. It is observed that the appearances of solidified shells for high carbon steels and some hyper-peritectic steels with high carbon content show lamellar, while that for other steels show spherical. Convex is formed along the chilling direction for most steels, besides some occasions that concave is formed for high carbon steel at times. The deformation degree decreases gradually in order of hypo-peritectic steel, ultra-low carbon steel, hyper-peritectic steel, low carbon steel, and high carbon steel, which is consistent with the solidification shrinkage in macroscope during continuous casting. Additionally, the microstructure of solidified shell of hypo-peritectic steel is bainite, while that of hyper-peritectic steel is martensite.

Mathematical Modeling of Initial Solidification and Slag Infiltration at the Meniscus of Slab Continuous Casting Mold

JOM ◽  
2018 ◽  
Vol 71 (1) ◽  
pp. 78-87 ◽  
Author(s):  
Xubin Zhang ◽  
Wei Chen ◽  
Piotr Roman Scheller ◽  
Ying Ren ◽  
Lifeng Zhang
Keyword(s):  
Mathematical Modeling ◽  
Continuous Casting ◽  
Continuous Casting Mold ◽  
Casting Mold ◽  
Slab Continuous Casting ◽  
Initial Solidification
Sign in / Sign up

Export Citation Format

Share Document