Electrochemical Stability and Biofouling Behavior of Differently Polarized Ti Surfaces in Simulated and Natural Seawater

Author(s):  
Zhaoxia Dai ◽  
Zi Ming Wang ◽  
Dajiang Zheng ◽  
Guang-Ling Song ◽  
Danqing Feng ◽  
...  
Author(s):  
W. A. Chiou ◽  
N. Kohyama ◽  
B. Little ◽  
P. Wagner ◽  
M. Meshii

The corrosion of copper and copper alloys in a marine environment is of great concern because of their widespread use in heat exchangers and steam condensers in which natural seawater is the coolant. It has become increasingly evident that microorganisms play an important role in the corrosion of a number of metals and alloys under a variety of environments. For the past 15 years the use of SEM has proven to be useful in studying biofilms and spatial relationships between bacteria and localized corrosion of metals. Little information, however, has been obtained using TEM capitalizing on its higher spacial resolution and the transmission observation of interfaces. The research presented herein is the first step of this new approach in studying the corrosion with biological influence in pure copper.Commercially produced copper (Cu, 99%) foils of approximately 120 μm thick exposed to a copper-tolerant marine bacterium, Oceanospirillum, and an abiotic culture medium were subsampled (1 cm × 1 cm) for this study along with unexposed control samples.


2020 ◽  
Vol 13 (5) ◽  
pp. 1429-1461 ◽  
Author(s):  
Xiaona Li ◽  
Jianwen Liang ◽  
Xiaofei Yang ◽  
Keegan R. Adair ◽  
Changhong Wang ◽  
...  

This review focuses on fundamental understanding, various synthesis routes, chemical/electrochemical stability of halide-based lithium superionic conductors, and their potential applications in energy storage as well as related challenges.


2020 ◽  
Vol 65 (1) ◽  
pp. 77-82
Author(s):  
Simona CAPRARESCU ◽  
◽  
Violeta PURCAR ◽  
Cristina MODROGAN ◽  
◽  
...  

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 256
Author(s):  
Florentina Golgovici ◽  
Mariana Prodana ◽  
Florentina Gina Ionascu ◽  
Ioana Demetrescu

The purpose of our study is to compare the behavior of two reprocessed dental alloys (NiCr and CoCr) at different temperatures considering the idea that food and drinks in the oral cavity create various compositions at different pH levels; the novelty is the investigation of temperature effect on corrosion parameters and ion release of dental alloys. Electrochemical stability was studied together with morphology, elemental composition and ions release determination. The results obtained are in good concordance: electrochemistry studies reveal that the corrosion rate is increasing by increasing the temperature. From SEM coupled with EDS, the oxide film formed on the surface of the alloys is stable at low temperatures and a trend to break after 310K. ICP-MS results evidence that in accordance with increasing temperature, the quantities of ions released from the alloys immersed in artificial saliva also increase, though they still remain small, less than 20 ppm.


2021 ◽  
Vol 60 (5) ◽  
pp. 3015-3024
Author(s):  
Xinru Ge ◽  
Jing Yu ◽  
Liheng Zhu ◽  
Zeneng Deng ◽  
Jiliang Zhang ◽  
...  

2020 ◽  
Vol 32 (1) ◽  
Author(s):  
Anna Maria Bell ◽  
Marcus von der Au ◽  
Julia Regnery ◽  
Matthias Schmid ◽  
Björn Meermann ◽  
...  

Abstract Background Cathodic protection by sacrificial anodes composed of aluminum-zinc-indium alloys is often applied to protect offshore support structures of wind turbines from corrosion. Given the considerable growth of renewable energies and thus offshore wind farms in Germany over the last decade, increasing levels of aluminum, indium and zinc are released to the marine environment. Although these metals are ecotoxicologically well-studied, data regarding their impact on marine organisms, especially sediment-dwelling species, as well as possible ecotoxicological effects of galvanic anodes are scarce. To investigate possible ecotoxicological effects to the marine environment, the diatom Phaedactylum tricornutum, the bacterium Aliivibrio fischeri and the amphipod Corophium volutator were exposed to dissolved galvanic anodes and solutions of aluminum and zinc, respectively, in standardized laboratory tests using natural seawater. In addition to acute toxicological effects, the uptake of these elements by C. volutator was investigated. Results The investigated anode material caused no acute toxicity to the tested bacteria and only weak but significant effects on algal growth. In case of the amphipods, the single elements Al and Zn showed significant effects only at the highest tested concentrations. Moreover, an accumulation of Al and In was observed in the crustacea species. Conclusions Overall, the findings of this study indicated no direct environmental impact on the tested marine organisms by the use of galvanic anodes for cathodic protection. However, the accumulation of metals in, e.g., crustaceans might enhance their trophic transfer within the marine food web.


2021 ◽  
Vol 1885 (3) ◽  
pp. 032004
Author(s):  
Qichao Pan ◽  
Zuwei Zhang ◽  
Yaqiong Zhang ◽  
Yaopeng Zhang ◽  
Bo Zhu

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3221
Author(s):  
Annalisa Paolone ◽  
Sergio Brutti

The electrochemical stability windows (ESW) of selected ionic liquids have been calculated by comparing different computational approaches previously suggested in the literature. The molecular systems under study are based on di-alkyl imidazolium and tetra-alkyl ammonium cations coupled with two different imide anions (namely, bis-fluorosulfonyl imide and bis-trifluoromethyl sulfonyl imide), for which an experimental investigation of the ESW is available. Thermodynamic oxidation and reduction potentials have here been estimated by different models based on calculations either on single ions or on ionic couples. Various Density Functional Theory (DFT) functionals (MP2, B3LYP, B3LYP including a polarizable medium and empirical dispersion forces) were exploited. Both vertical and adiabatic transitions between the starting states and the oxidized or reduced states were considered. The approach based on calculations on ionic couples is not able to reproduce the experimental data, whatever the used DFT functional. The best quantitative agreement is obtained by calculations on single ions when the MP2 functional in vacuum is considered and the transitions between differently charged states are vertical (purely electronic without the relaxation of the structure). The B3LYP functional underestimates the ESW. The inclusion of a polar medium excessively widens the ESW, while a large shrinkage of the ESW is obtained by adopting an adiabatic transition scheme instead of a vertical transition one.


2021 ◽  
Vol 415 ◽  
pp. 128987
Author(s):  
Emerson Coy ◽  
Visnja Babacic ◽  
Luis Yate ◽  
Karol Załęski ◽  
Yeonho Kim ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document