Effect of sesquiterpenes on the general corrosion behaviour of stainless steel in sulfuric acid: electrochemical and quantum chemical calculations

2020 ◽  
Vol 75 (1) ◽  
pp. 39-56
Author(s):  
Yassine Koumya ◽  
Rachid Idouhli ◽  
Othmane Zakir ◽  
Mohy Eddine Khadiri ◽  
Mohamed Zaki ◽  
...  
Metals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 794 ◽  
Author(s):  
Yiqi Zhou ◽  
Dirk Lars Engelberg

Bipolar electrochemistry has been applied to Type 420 ferritic stainless steel in order to determine the full spectrum of anodic-to-cathodic polarisation behaviour. The occurrence of crevice corrosion, pitting corrosion in combination with general corrosion, pitting corrosion only, general corrosion only, followed by a cathodic region has been observed. Instances of pitting corrosion initiated near chromium-rich carbides with Cr23C6, Cr3C2, and Cr7C3 identified as pit nucleation sites. The observed pit growth kinetics were independent of the electrochemical over-potential. Characterisation of the pit size distributions supports the presence of a critical dissolved volume for the transition of metastable to stable pit growth and pit coalescence.


2010 ◽  
Vol 10 (6) ◽  
pp. 14897-14946 ◽  
Author(s):  
M. Ehn ◽  
H. Junninen ◽  
T. Petäjä ◽  
T. Kurtén ◽  
V.-M. Kerminen ◽  
...  

Abstract. A recently developed atmospheric pressure interface mass spectrometer (APi-TOF) measured the negative and positive ambient ion composition at a boreal forest site. As observed in previous studies, the negative ions were dominated by strong organic and inorganic acids (e.g. malonic, nitric and sulfuric acid), whereas the positive ions consisted of strong bases (e.g. alkyl pyridines and quinolines). Several new ions and clusters of ions were identified based on their exact masses, made possible by the high resolution, mass accuracy and sensitivity of the APi-TOF. Time series correlograms aided in peak identification and assigning the atomic compositions to molecules. Quantum chemical calculations of proton affinities and cluster stabilities were also used to confirm the plausibility of the assignments. Acids in the gas phase are predominantly formed by oxidation in the gas phase, and thus the concentrations are expected to vary strongly between day and night. This was also the case in this study, where the negative ions showed strong diurnal behavior, whereas the daily changes in the positive ions were considerably smaller. A special focus in this work was the changes in the ion distributions occurring during new particle formation events. We found that sulfuric acid, together with its clusters, dominated the negative ion spectrum during these events. The monomer (HSO4−) was the largest peak, together with the dimer (H2SO4·HSO4−) and trimer ((H2SO4)2·HSO4−). SO5− also tracked HSO4− at around 20% of the HSO4− concentration at all times. During the strongest events, also the tetramer and a cluster with the tetramer and ammonia were detected. Quantum chemical calculations predict that sulfuric acid clusters containing ammonia are much more stable when neutral, thus the detection of a single ion cluster implies that ammonia can be an important compound in the nucleation process. We also believe to have made the first observations of an organosulfate (glycolic acid sulfate) in the gas phase. This ion, and its cluster with sulfuric acid, correlates with the HSO4−, but peaks in the early afternoon, some hours later than HSO4− itself. A list of all identified ions is presented in the supplementary material, and also a list of all detected masses not yet identified.


2020 ◽  
Vol 2020 ◽  
pp. 1-10 ◽  
Author(s):  
Y. Koumya ◽  
R. Idouhli ◽  
A. Oukhrib ◽  
M. Khadiri ◽  
A. Abouelfida ◽  
...  

The corrosion of stainless steel is one of the major industries’ issues that gained wide interest among researchers. It became necessary to develop and apply eco-friendly approaches to corrosion control. This work explores the inhibitory effect of a newly synthesized amino cadalene (ACM) on the corrosion of stainless steel type 321 in sulfuric acid 1M. Particularly, the experimental study consisting of electrochemical and surface analyses was conducted in conjunction with a theoretical approach. The electrochemical results showed that ACM acted as a mixed-type corrosion inhibitor and the inhibition efficiency attained 91% at 10−3M. EIS measurements revealed that both metal charge transfer and diffusion processes are involved in the interfacial metal/solution reactions. The interfacial mechanism is thoroughly investigated; the physisorption of the protonated molecules was preceded by the formation of a negative layer due to adsorption of the solution anionic species. The experimental insights are corroborated with the quantum chemical calculations.


2010 ◽  
Vol 10 (17) ◽  
pp. 8513-8530 ◽  
Author(s):  
M. Ehn ◽  
H. Junninen ◽  
T. Petäjä ◽  
T. Kurtén ◽  
V.-M. Kerminen ◽  
...  

Abstract. A recently developed atmospheric pressure interface mass spectrometer (APi-TOF) measured the negative and positive ambient ion composition at a boreal forest site. As observed in previous studies, the negative ions were dominated by strong organic and inorganic acids (e.g. malonic, nitric and sulfuric acid), whereas the positive ions consisted of strong bases (e.g. alkyl pyridines and quinolines). Several new ions and clusters of ions were identified based on their exact masses, made possible by the high resolution, mass accuracy and sensitivity of the APi-TOF. Time series correlograms aided in peak identification and assigning the atomic compositions to molecules. Quantum chemical calculations of proton affinities and cluster stabilities were also used to confirm the plausibility of the assignments. Acids in the gas phase are predominantly formed by oxidation in the gas phase, and thus the concentrations are expected to vary strongly between day and night. This was also the case in this study, where the negative ions showed strong diurnal behavior, whereas the daily changes in the positive ions were considerably smaller. A special focus in this work was the changes in the ion distributions occurring during new particle formation events. We found that sulfuric acid, together with its clusters, dominated the negative ion spectrum during these events. The monomer (HSO4−) was the largest peak, together with the dimer (H2SO4 · HSO4−) and trimer ((H2SO4)2 · HSO4−). SO5− also tracked HSO4− at around 20% of the HSO4− concentration at all times. During the strongest events, the tetramer and a cluster with the tetramer and ammonia were also detected. Quantum chemical calculations predict that sulfuric acid clusters containing ammonia are much more stable when neutral, thus the detection of a single ion cluster implies that ammonia can be an important compound in the nucleation process. We also believe to have made the first observations of an organosulfate (glycolic acid sulfate) in the gas phase. This ion, and its cluster with sulfuric acid, correlates with the HSO4−, but peaks in the early afternoon, some hours later than HSO4− itself. A list of all identified ions is presented in the supplementary material, and also a list of all detected masses not yet identified.


2020 ◽  
Author(s):  
Tsuyoshi Mita ◽  
Yu Harabuchi ◽  
Satoshi Maeda

The systematic exploration of synthetic pathways to afford a desired product through quantum chemical calculations remains a considerable challenge. In 2013, Maeda et al. introduced ‘quantum chemistry aided retrosynthetic analysis’ (QCaRA), which uses quantum chemical calculations to search systematically for decomposition paths of the target product and propose a synthesis method. However, until now, no new reactions suggested by QCaRA have been reported to lead to experimental discoveries. Using a difluoroglycine derivative as a target, this study investigated the ability of QCaRA to suggest various synthetic paths to the target without relying on previous data or the knowledge and experience of chemists. Furthermore, experimental verification of the seemingly most promising path led to the discovery of a synthesis method for the difluoroglycine derivative. The extent of the hands-on expertise of chemists required during the verification process was also evaluated. These insights are expected to advance the applicability of QCaRA to the discovery of viable experimental synthetic routes.


Sign in / Sign up

Export Citation Format

Share Document