A comparison of physical and chemical properties of milk fat fractions obtained by two processing technologies

1998 ◽  
Vol 75 (10) ◽  
pp. 1249-1264 ◽  
Author(s):  
A. R. Bhaskar ◽  
S. S. H. Rizvi ◽  
C. Bertoli ◽  
L. B. Fay ◽  
B. Hug
2018 ◽  
Vol 12 (3) ◽  
Author(s):  
O. O. Bondarchuk

Physical and chemical properties of cream multistep modes of ripening and fermentations are investigation and their role in the production of sour-cream butter is studied. The process of ripening of cream was carried out multistep, regimes were selected depending on seasonal changes in the composition of milk fat. For raw materials of the autumn-winter period, for the values of iodine number 29.1–34.5, the first stage of ripening was carried out at a temperature of 8°C for 2 hours, the second stage – at 21°C for 7 hours, the third stage – at 13°C for 10 hours. For raw of spring-summer period, for the values of iodine number 34.5–40.1, the first stage of ripening was carried out at 21°C for 6 hours, the second stage – at 13°C for 4 hours, the third stage – at 8°C for 8 hours. It has been established that individual modes of low-temperature cream preparation, taking into account seasonal changes in the composition of milk fat, make it possible to obtain cream before churning almost with the same indexes of effective viscosity. The content of the crystalline phase of milk fat under both temperature regimes was 38.7–40.1%, which is sufficient to obtain of proper consistency sour-cream butter. The content of diacetyl and volatile organic acids more depend on the level of fermentation of cream than on the technological regimes of ripening and seasonality of raw materials. It has been proved that an increase in the fermentation degree of cream promotes an increase in the acidity of plasma and the content of aroma-producing components in the butter, and, accordingly, affects the degree of the sour taste. It is recommended for the production of cultured butter to begin the cream when the acidity of the plasma reaches 60ºT, which ensures the formation of high sensorial characteristic of the finished product.


2010 ◽  
Vol 126-128 ◽  
pp. 952-956 ◽  
Author(s):  
Ching Yen Ho ◽  
Yu Hsiang Tsai ◽  
Feng Ming Sui

This paper investigates effects of particle size on heat transfer in copper powders. The understanding for thermal properties of the powder is advantageous to the advancement of the processing technologies such as laser cladding, laser sintering, powder metallurgy and its other applications. Nanosized particles possess characteristic physical and chemical properties different from those of bulk materials due to the confinement of electrons, excitons, and photons into small volumes. Therefore it is valuable to discuss the thermal behaviours of powders constituted by nanometer-sized particles. The powder is wrapped up in the slender tube. One end of the slender tube filled with powder is connected to the low constant-temperature reservoir and the other end is kept at room temperature. The temperature histories at the 1cm location of the slender tube from the low constant-temperature reservoir are recorded using thermal couples. Powders of particles with the sizes 50nm and 5000nm are employed in this experiment. The results show that the thermal diffusion in the 50nm Cu powder is faster than that in the 5000nm Cu powder.


1966 ◽  
Vol 24 ◽  
pp. 101-110
Author(s):  
W. Iwanowska

In connection with the spectrophotometric study of population-type characteristics of various kinds of stars, a statistical analysis of kinematical and distribution parameters of the same stars is performed at the Toruń Observatory. This has a twofold purpose: first, to provide a practical guide in selecting stars for observing programmes, second, to contribute to the understanding of relations existing between the physical and chemical properties of stars and their kinematics and distribution in the Galaxy.


2017 ◽  
pp. 31-43
Author(s):  
Berta Ratilla ◽  
Loreme Cagande ◽  
Othello Capuno

Organic farming is one of the management strategies that improve productivity of marginal uplands. The study aimed to: (1) evaluate effects of various organic-based fertilizers on the growth and yield of corn; (2) determine the appropriate combination for optimum yield; and (3) assess changes on the soil physical and chemical properties. Experiment was laid out in Randomized Complete Block Design, with 3 replications and 7 treatments, namely; T0=(0-0-0); T1=1t ha-1 Evans + 45-30-30kg N, P2O5, K2O ha-1; T2=t ha-1 Wellgrow + 45-30-30kg N, P2O5, K2O ha-1; T3=15t ha-1 chicken dung; T4=10t ha-1 chicken dung + 45-30-30kg N, P2O5, K2O ha-1; T5=15t ha-1 Vermicast; and T6=10t ha-1 Vermicast + 45-30-30kg N, P2O5, K2O ha-1. Application of organic-based fertilizers with or without inorganic fertilizers promoted growth of corn than the control. But due to high infestation of corn silk beetle(Monolepta bifasciata Horns), its grain yield was greatly affected. In the second cropping, except for Evans, any of these fertilizers applied alone or combined with 45-30-30kg N, P2O5, K2O ha-1 appeared appropriate in increasing corn earyield. Soil physical and chemical properties changed with addition of organic fertilizers. While bulk density decreased irrespective of treatments, pH, total N, available P and exchangeable K generally increased more with chicken dung application.


Sign in / Sign up

Export Citation Format

Share Document