Application of a probabilistic LHS-PAWN approach to assess building cooling energy demand uncertainties

2021 ◽  
Author(s):  
Shobhit Chaturvedi ◽  
Elangovan Rajasekar
Keyword(s):  
Energy Demand ◽  
Building Cooling ◽  
Cooling Energy Demand

scholarly journals Impact of Passive Energy Efficiency Measures on Cooling Energy Demand in an Architectural Campus Building in Karachi, Pakistan

2021 ◽  
Vol 13 (13) ◽  
pp. 7251
Author(s):  
Mushk Bughio ◽  
Muhammad Shoaib Khan ◽  
Waqas Ahmed Mahar ◽  
Thorsten Schuetze
Keyword(s):  
Energy Efficiency ◽  
Energy Demand ◽  
Electricity Consumption ◽  
Information Modeling ◽  
Base Case ◽  
Energy Efficiency Measures ◽  
Efficiency Measures ◽  
The Impact ◽  
Cooling Energy Demand ◽  
Campus Building

Electric appliances for cooling and lighting are responsible for most of the increase in electricity consumption in Karachi, Pakistan. This study aims to investigate the impact of passive energy efficiency measures (PEEMs) on the potential reduction of indoor temperature and cooling energy demand of an architectural campus building (ACB) in Karachi, Pakistan. PEEMs focus on the building envelope’s design and construction, which is a key factor of influence on a building’s cooling energy demand. The existing architectural campus building was modeled using the building information modeling (BIM) software Autodesk Revit. Data related to the electricity consumption for cooling, building masses, occupancy conditions, utility bills, energy use intensity, as well as space types, were collected and analyzed to develop a virtual ACB model. The utility bill data were used to calibrate the DesignBuilder and EnergyPlus base case models of the existing ACB. The cooling energy demand was compared with different alternative building envelope compositions applied as PEEMs in the renovation of the existing exemplary ACB. Finally, cooling energy demand reduction potentials and the related potential electricity demand savings were determined. The quantification of the cooling energy demand facilitates the definition of the building’s electricity consumption benchmarks for cooling with specific technologies.

A Demand Based Optimum Solar Panel Orientation

2010 ◽  
Author(s):  
Mohammad H. Naraghi
Keyword(s):  
New York ◽  
New York City ◽  
Power Consumption ◽  
York City ◽  
Energy Demand ◽  
Solar Panel ◽  
Consumption Pattern ◽  
Tilted Surface ◽  
Typical Summer ◽  
Building Cooling

The clear sky and monthly clearness index models are used to evaluate the hourly and monthly insolation on unit area of a tilted surface for the entire year. The hourly power consumption of a typical municipality (for this case New York City) for typical summer and winter days are used to determine the tilt and azimuth angles of a solar panel such that the solar energy reached the panel best match the energy consumption pattern. For the example case considered, in this work New York City, the electric power consumption peaks during summers at afternoon hours, due to increase in building cooling loads. It is found that orienting the solar panel at a westward azimuth angle with a tilt angle that results in maximum annual insolation is the best orientation of the solar panel for responding to both the peak energy demand and having reasonably high overall annual power generation. Although the model is used to optimize the solar panel orientation for New York City, it can however, be used for any building at any location as long as the needed solar data and power consumption pattern are known.

scholarly journals Air Distribution and Air Handling Unit Configuration Effects on Energy Performance in an Air-Heated Ice Rink Arena

Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 693 ◽  
Author(s):  
Mehdi Taebnia ◽  
Sander Toomla ◽  
Lauri Leppä ◽  
Jarek Kurnitski
Keyword(s):  
Temperature Gradient ◽  
Air Temperature ◽  
Indoor Air ◽  
Energy Demand ◽  
Energy Performance ◽  
Air Distribution ◽  
Air Handling Unit ◽  
Cooling Coil ◽  
Indoor Conditions ◽  
Cooling Energy Demand

Indoor ice rink arenas are among the foremost consumers of energy within building sector due to their exclusive indoor conditions. A single ice rink arena may consume energy of up to 3500 MWh annually, indicating the potential for energy saving. The cooling effect of the ice pad, which is the main source for heat loss, causes a vertical indoor air temperature gradient. The objective of the present study is twofold: (i) to study vertical temperature stratification of indoor air, and how it impacts on heat load toward the ice pad; (ii) to investigate the energy performance of air handling units (AHU), as well as the effects of various AHU layouts on ice rinks’ energy consumption. To this end, six AHU configurations with different air-distribution solutions are presented, based on existing arenas in Finland. The results of the study verify that cooling energy demand can significantly be reduced by 38 percent if indoor temperature gradient approaches 1 °C/m. This is implemented through air distribution solutions. Moreover, the cooling energy demand for dehumidification is decreased to 59.5 percent through precisely planning the AHU layout, particularly at the cooling coil and heat recovery sections. The study reveals that a more customized air distribution results in less stratified indoor air temperature.

scholarly journals Influence of Shading on Cooling Energy Demand

2017 ◽  
Vol 245 ◽  
pp. 052046
Author(s):  
Sławomir Rabczak ◽  
Maria Bukowska ◽  
Danuta Proszak-Miąsik ◽  
Krzysztof Nowak
Keyword(s):  
Energy Demand ◽  
Cooling Energy Demand
Sign in / Sign up

Export Citation Format

Share Document