Mechanical characteristics of oil palm fiber reinforced thermoplastics as filament for fused deposition modeling (FDM)

2020 ◽  
Vol 8 (1) ◽  
pp. 72-81 ◽  
Author(s):  
Mohd Nazri Ahmad ◽  
Mohammad Khalid Wahid ◽  
Nurul Ain Maidin ◽  
Mohd Hidayat Ab Rahman ◽  
Mohd Hairizal Osman ◽  
...  
Keyword(s):  
Oil Palm ◽  
Fused Deposition Modeling ◽  
Mechanical Characteristics ◽  
Fiber Reinforced ◽  
Palm Fiber ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Reinforced Thermoplastics ◽  
Fiber Reinforced Thermoplastics

scholarly journals Rheological and Morphological Properties of Oil Palm Fiber-Reinforced Thermoplastic Composites for Fused Deposition Modeling (FDM)

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3739
Author(s):  
Mohd Nazri Ahmad ◽  
Mohamad Ridzwan Ishak ◽  
Mastura Mohammad Taha ◽  
Faizal Mustapha ◽  
Zulkiflle Leman
Keyword(s):  
Rheological Behavior ◽  
Oil Palm ◽  
Fused Deposition Modeling ◽  
Shear Thinning ◽  
Morphological Properties ◽  
Fused Deposition Modelling ◽  
Fiber Reinforced ◽  
Palm Fiber ◽  
Fiber Loading ◽  
Fused Deposition

Fused deposition modelling (FDM) is a filament-based rapid prototyping technology that allows new composite materials to be introduced into the FDM process as long as they can be manufactured in feedstock filament form. The purpose of this research was to analyze the rheological behavior of oil palm fiber-reinforced acrylonitrile butadiene styrene (ABS) composites when used as a feedstock material, as well as to determine the best processing conditions for FDM. The composite’s shear thinning behavior was observed, and scanning electron microscopy was used to reveal its composition. The morphological result found that there was a good fiber/matrix adhesion with a 3 wt% fiber loading, as no fiber pullouts or gaps developed between the oil palm fiber and ABS. However, some pores and fiber pullouts were found with a 5 and 7 wt% fiber loading. Next, the rheological results showed that the increment of fiber content (wt%) increased the viscosity. This discovery can definitely be used in the extrusion process for making wire filament for FDM. The shear thinning effect was increased by adding 3, 5, or 7 wt% of oil palm fiber. The non-Newtonian index (n) of the composites increased as the number of shear rates increased, indicating that the fiber loading had a significant impact on the rheological behavior. As the fiber loading increased, the viscosity and shear stress values increased as well. As a result, oil fiber reinforced polymer composites can be used as a feedstock filament for FDM.

scholarly journals Effect of Extrusion Temperature on the Physico-Mechanical Properties of Unidirectional Wood Fiber-Reinforced Polylactic Acid Composite (WFRPC) Components Using Fused Deposition Modeling

Polymers ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 976 ◽  
Author(s):  
Teng-Chun Yang
Keyword(s):  
Mechanical Properties ◽  
Polylactic Acid ◽  
Fused Deposition Modeling ◽  
Wood Fiber ◽  
Color Difference ◽  
Extrusion Temperature ◽  
Fiber Reinforced ◽  
Substantial Impact ◽  
Fused Deposition ◽  
Deposition Modeling

Wood fiber-reinforced polylactic acid (PLA) composites (WFRPCs) were used as a filament to manufacture the unidirectional WFRPC components by means of fused deposition modeling (FDM). The physico-mechanical properties of the WFRPC components printed at different extrusion temperatures (200, 210, 220, and 230 °C) were determined. The results revealed that most of the physical properties (moisture content, surface roughness, water absorption rate, and thickness swelling rate) of the printed WFRPC component were not significantly influenced by extrusion temperature, while its density and color difference increased as the extrusion temperature increased. Additionally, the tensile and flexural properties of the FDM-printed WFRPC component decreased when the extrusion temperature was more than 200 °C, whereas the compressive strength and internal bond strength increased by 15.1% and 24.3%, respectively, when the extrusion temperature was increased from 200 to 230 °C. Furthermore, scanning electronic microscopy (SEM) demonstrated that the fracture surface of the tensile component printed at a higher extrusion temperature exhibited a better compatibility at fiber/PLA interfaces and good adhesion between the extruded filament segments. These results indicate that the FDM printing process using different extrusion temperatures has a substantial impact on the surface color, density, and mechanical properties of the printed WFRPC component.

Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer

2018 ◽  
Vol 38 (3) ◽  
pp. 99-116 ◽  
Author(s):  
Behnam Akhoundi ◽  
Amir Hossein Behravesh ◽  
Arvin Bagheri Saed
Keyword(s):  
Mechanical Properties ◽  
Fused Deposition Modeling ◽  
Thermoplastic Composites ◽  
3D Printer ◽  
Fiber Reinforced ◽  
Continuous Fiber ◽  
Fiber Volume ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Consistent Method

The main purpose of this research is to bolster mechanical properties of the parts, produced by an extrusion-based 3D printer, or fused deposition modeling machine, via increasing the content of continuous fiber yarn to its practical limit. In-melt continuous glass fiber yarn embedding was applied as a reliable and consistent method for simultaneous impregnation to produce continuous fiber-reinforced thermoplastic composites in the fused deposition modeling process. It is well known that the main weakness in the fused deposition modeling 3D printed products is their low strength compared to the manufactured ones by conventional methods such as injection molding and machining processes. This characteristic can be related to both inherent weakness of thermoplastic materials and poor adhesion between the deposited rasters and the layers. Although various attempts have been performed to tackle this issue, it is widely believed that using continuous fibers is the most effective method to serve this purpose if a reliable and consistent method is implemented. Since the mechanical properties of continuous fiber-reinforced composites directly depend on the content of fiber volume, maximizing the fiber content as well as producing an integrated part was assumed as the main objective. In this work, an analysis of various patterns of raster deposition was conducted, followed by the experiments and verification. The effective parameters on the fiber yarn volume, such as fiber yarn diameter, fiber yarn laying pattern, extrusion width, layer height, and flow percentage, were investigated and their optimal values were reported. The attained experimental results showed that, for polylactic acid-glass fiber yarn reinforced composite, with the extrusion width of 0.3 mm, the layer heights of 0.22 mm, flow percentage of 0.43, and the rectangular laying pattern, approximately 50% fiber-volume content can be achieved which resulted in tensile yield strength and modulus of 478 MPa and 29.4 GPa, respectively. There was an excellent agreement between these experimental results and predicted theoretically values by rule of mixture.

scholarly journals 3D Printing of Fiber-Reinforced Plastic Composites Using Fused Deposition Modeling: A Status Review

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4520
Author(s):  
Salman Pervaiz ◽  
Taimur Ali Qureshi ◽  
Ghanim Kashwani ◽  
Sathish Kannan
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Fiber Reinforced Polymers ◽  
Fiber Reinforced ◽  
Reinforced Polymers ◽  
Fused Deposition ◽  
Frp Composites ◽  
Deposition Modeling

Composite materials are a combination of two or more types of materials used to enhance the mechanical and structural properties of engineering products. When fibers are mixed in the polymeric matrix, the composite material is known as fiber-reinforced polymer (FRP). FRP materials are widely used in structural applications related to defense, automotive, aerospace, and sports-based industries. These materials are used in producing lightweight components with high tensile strength and rigidity. The fiber component in fiber-reinforced polymers provides the desired strength-to-weight ratio; however, the polymer portion costs less, and the process of making the matrix is quite straightforward. There is a high demand in industrial sectors, such as defense and military, aerospace, automotive, biomedical and sports, to manufacture these fiber-reinforced polymers using 3D printing and additive manufacturing technologies. FRP composites are used in diversified applications such as military vehicles, shelters, war fighting safety equipment, fighter aircrafts, naval ships, and submarine structures. Techniques to fabricate composite materials, degrade the weight-to-strength ratio and the tensile strength of the components, and they can play a critical role towards the service life of the components. Fused deposition modeling (FDM) is a technique for 3D printing that allows layered fabrication of parts using thermoplastic composites. Complex shape and geometry with enhanced mechanical properties can be obtained using this technique. This paper highlights the limitations in the development of FRPs and challenges associated with their mechanical properties. The future prospects of carbon fiber (CF) and polymeric matrixes are also mentioned in this study. The study also highlights different areas requiring further investigation in FDM-assisted 3D printing. The available literature on FRP composites is focused only on describing the properties of the product and the potential applications for it. It has been observed that scientific knowledge has gaps when it comes to predicting the performance of FRP composite parts fabricated under 3D printing (FDM) techniques. The mechanical properties of 3D-printed FRPs were studied so that a correlation between the 3D printing method could be established. This review paper will be helpful for researchers, scientists, manufacturers, etc., working in the area of FDM-assisted 3D printing of FRPs.

Property Enhancement of Carbon Fiber-Reinforced Polylactic Acid Composites Prepared by Fused-Deposition Modeling

2020 ◽  
pp. 455-478
Author(s):  
Pravin R. Kubade ◽  
Hrushikesh B. Kulkarni ◽  
Vinayak C. Gavali
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Carbon Fiber ◽  
Polylactic Acid ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Fiber Reinforced ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Properties Of Composites

Additive Manufacturing or three-dimensional printing refers to a process of building lighter, stronger three-dimensional parts, manufactured layer by layer. Additive manufacturing uses a computer and CAD software which passes the program to the printer to build the desired shape. Metals, thermoplastic polymers, and ceramics are the preferred materials used for additive manufacturing. Fused deposition modeling is one additive manufacturing technique involving the use of thermoplastic polymer for creating desired shape. Carbon fibers can be added into polymer to strengthen the composite without adding additional weight. Present work deals with the manufacturing of Carbon fiber-reinforced Polylactic Acid composites prepared using fused deposition modeling. Mechanical and thermo-mechanical properties of composites are studied as per ASTM standards and using sophisticated instruments. It is observed that there is enhancement in thermo-mechanical properties of composites due to addition reinforcement which is discussed in detail.

The Mechanical Characteristics of 3D Printed Parts According to the Build Orientation

2014 ◽  
Vol 474 ◽  
pp. 381-386 ◽  
Author(s):  
Petr Zelený ◽  
Jiří Šafka ◽  
Irina Elkina
Keyword(s):  
Rapid Prototyping ◽  
Fused Deposition Modeling ◽  
Mechanical Characteristics ◽  
Tensile Tests ◽  
Physical Models ◽  
Build Orientation ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Component Element ◽  
3D Printed

This article is focused on a production of mechanically resistant physical models using Rapid Prototyping technology. There are two tested materials, ABS is the first build material and ABS-like is the second build material with similar properties. The article describes the production of a testing component - element for tensile tests by two RP technologies. The first technology is FDM (Fused Deposition Modeling) and the second PolyJet Matrix. Further the article describes the description and evaluation of the tensile tests.

Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties

2016 ◽  
Vol 51 (4) ◽  
pp. 451-462 ◽  
Author(s):  
Fuda Ning ◽  
Weilong Cong ◽  
Yingbin Hu ◽  
Hui Wang
Keyword(s):  
Carbon Fiber ◽  
Fused Deposition Modeling ◽  
Carbon Fiber Reinforced Plastic ◽  
Fiber Reinforced ◽  
Fiber Reinforced Plastic ◽  
Fused Deposition ◽  
Plastic Composites ◽  
Reinforced Plastic ◽  
Deposition Modeling ◽  
Carbon Fiber Reinforced

Carbon fiber-reinforced plastic composites have been intensively used for many applications due to their attractive properties. The increasing demand of carbon fiber-reinforced plastic composites is driving novel manufacturing processes to be in short manufacturing cycle time and low production cost, which is difficult to realize during carbon fiber-reinforced plastic composites fabrication in common molding processes. Fused deposition modeling, as one of the additive manufacturing techniques, has been reported for fabricating carbon fiber-reinforced plastic composites. The process parameters used in fused deposition modeling of carbon fiber-reinforced plastic composites follow those in fused deposition modeling of pure plastic materials. After adding fiber reinforcements, it is crucial to investigate proper fused deposition modeling process parameters to ensure the quality of the carbon fiber-reinforced plastic parts fabricated by fused deposition modeling. However, there are no reported investigations on the effects of fused deposition modeling process parameters on the mechanical properties of carbon fiber-reinforced plastic composites. In the experimental investigations of this paper, carbon fiber-reinforced plastic composite parts are fabricated using a fused deposition modeling machine. Tensile tests are conducted to obtain the tensile properties. The effects of fused deposition modeling process parameters on the tensile properties of fused deposition modeling-fabricated carbon fiber-reinforced plastic composite parts are investigated. The fracture interfaces of the parts after tensile testing are observed by a scanning electron microscope to explain material failure modes and reasons.

Sign in / Sign up

Export Citation Format

Share Document