scholarly journals Chemical Coupled PEDOT:PSS/Si Electrode: Suppressed Electrolyte Consumption Enables Long-Term Stability

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Xuejiao Liu ◽  
Zhixin Xu ◽  
Asma Iqbal ◽  
Ming Chen ◽  
Nazakat Ali ◽  
...  
Keyword(s):  
Energy Density ◽  
Solid Electrolyte Interphase ◽  
Rate Capability ◽  
High Energy ◽  
High Energy Density ◽  
Volume Changes ◽  
Etching Depth ◽  
Long Term Stability ◽  
Depth Analysis

AbstractHuge volume changes of Si during lithiation/delithiation lead to regeneration of solid-electrolyte interphase (SEI) and consume electrolyte. In this article, γ-glycidoxypropyl trimethoxysilane (GOPS) was incorporated in Si/PEDOT:PSS electrodes to construct a flexible and conductive artificial SEI, effectively suppressing the consumption of electrolyte. The optimized electrode can maintain 1000 mAh g−1 for nearly 800 cycles under limited electrolyte compared with 40 cycles of the electrodes without GOPS. Also, the optimized electrode exhibits excellent rate capability. The use of GOPS greatly improves the interface compatibility between Si and PEDOT:PSS. XPS Ar+ etching depth analysis proved that the addition of GOPS is conducive to forming a more stable SEI. A full battery assembled with NCM 523 cathode delivers a high energy density of 520 Wh kg−1, offering good stability.

Bread-inspired foaming strategy to fabricate a wine lees-based porous carbon framework for high specific energy supercapacitors

2021 ◽  
Vol 5 (19) ◽  
pp. 4965-4972
Author(s):  
Hui Peng ◽  
Yipu Xu ◽  
Yaping Jiang ◽  
Xin Wang ◽  
Rui Zhao ◽  
...  
Keyword(s):  
Energy Density ◽  
Porous Carbon ◽  
Fermentation Process ◽  
High Energy ◽  
High Energy Density ◽  
Long Term Stability ◽  
Carbon Framework ◽  
One Step ◽  
High Specific Energy

Inspired by the fermentation process of bread, a novel wine lees-based porous carbon framework (WLCF) having high energy density and excellent long-term stability is prepared via one-step sodium bicarbonate foaming and activation strategy.

Urchin-like NiCo2O4 hollow microspheres and FeSe2 micro-snowflakes for flexible solid-state asymmetric supercapacitors

2017 ◽  
Vol 5 (11) ◽  
pp. 5568-5576 ◽  
Author(s):  
Chenchen Ji ◽  
Fuzhu Liu ◽  
Liang Xu ◽  
Shengchun Yang
Keyword(s):  
Solid State ◽  
Energy Density ◽  
Cathode Material ◽  
Hollow Structure ◽  
High Energy ◽  
Hollow Microspheres ◽  
High Energy Density ◽  
Asymmetric Supercapacitors ◽  
Long Term Stability

FSASCs were designed using a NiCo2O4 cathode material with an urchin-like hollow structure and a FeSe2 anode with a hierarchical snowflake structure, which exhibit satisfactory performances with excellent flexibility, high energy density, and long-term stability.

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

scholarly journals In-Situ Annealed Ti3C2Tx MXene Based All-Solid-State Flexible Zn-Ion Hybrid Micro Supercapacitor Array with Enhanced Stability

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
La Li ◽  
Weijia Liu ◽  
Kai Jiang ◽  
Di Chen ◽  
Fengyu Qu ◽  
...  
Keyword(s):  
High Energy ◽  
High Rate ◽  
High Energy Density ◽  
Electrochemical Performances ◽  
Integrated Electronics ◽  
Long Term Stability ◽  
Hybrid Supercapacitors ◽  
Portable Electronics

AbstractZn-ion hybrid supercapacitors (SCs) are considered as promising energy storage owing to their high energy density compared to traditional SCs. How to realize the miniaturization, patterning, and flexibility of the Zn-ion SCs without affecting the electrochemical performances has special meanings for expanding their applications in wearable integrated electronics. Ti3C2Tx cathode with outstanding conductivity, unique lamellar structure and good mechanical flexibility has been demonstrated tremendous potential in the design of Zn-ion SCs, but achieving long cycling stability and high rate stability is still big challenges. Here, we proposed a facile laser writing approach to fabricate patterned Ti3C2Tx-based Zn-ion micro-supercapacitors (MSCs), followed by the in-situ anneal treatment of the assembled MSCs to improve the long-term stability, which exhibits 80% of the capacitance retention even after 50,000 charge/discharge cycles and superior rate stability. The influence of the cathode thickness on the electrochemical performance of the MSCs is also studied. When the thickness reaches 0.851 µm the maximum areal capacitance of 72.02 mF cm−2 at scan rate of 10 mV s−1, which is 1.77 times higher than that with a thickness of 0.329 µm (35.6 mF cm−2). Moreover, the fabricated Ti3C2Tx based Zn-ion MSCs have excellent flexibility, a digital timer can be driven by the single device even under bending state, a flexible LED displayer of “TiC” logo also can be easily lighted by the MSC arrays under twisting, crimping, and winding conditions, demonstrating the scalable fabrication and application of the fabricated MSCs in portable electronics.

Porous manganese oxide nanocubes enforced by solid electrolyte interphase as anode of high energy density battery

2017 ◽  
Vol 224 ◽  
pp. 251-259 ◽  
Author(s):  
Xiaoqiao Chen ◽  
Yunmin Zhu ◽  
Bin Li ◽  
Pengbo Hong ◽  
Xueyi Luo ◽  
...  
Keyword(s):  
Energy Density ◽  
Solid Electrolyte ◽  
Manganese Oxide ◽  
Solid Electrolyte Interphase ◽  
High Energy ◽  
High Energy Density

scholarly journals Stable Lithium-Carbon Composite Enabled by Dual-Salt Additives

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Lei Zheng ◽  
Feng Guo ◽  
Tuo Kang ◽  
Yingzhu Fan ◽  
Wei Gu ◽  
...  
Keyword(s):  
Coulombic Efficiency ◽  
Solid Electrolyte Interphase ◽  
Rate Capability ◽  
Negative Electrode ◽  
High Energy ◽  
Carbon Composite ◽  
High Reactivity ◽  
Cycling Stability ◽  
High Energy Density ◽  
Lithium Metal

AbstractLithium metal is regarded as the ultimate negative electrode material for secondary batteries due to its high energy density. However, it suffers from poor cycling stability because of its high reactivity with liquid electrolytes. Therefore, continuous efforts have been put into improving the cycling Coulombic efficiency (CE) to extend the lifespan of the lithium metal negative electrode. Herein, we report that using dual-salt additives of LiPF6 and LiNO3 in an ether solvent-based electrolyte can significantly improve the cycling stability and rate capability of a Li-carbon (Li-CNT) composite. As a result, an average cycling CE as high as 99.30% was obtained for the Li-CNT at a current density of 2.5 mA cm–2 and an negative electrode to positive electrode capacity (N/P) ratio of 2. The cycling stability and rate capability enhancement of the Li-CNT negative electrode could be attributed to the formation of a better solid electrolyte interphase layer that contains both inorganic components and organic polyether. The former component mainly originates from the decomposition of the LiNO3 additive, while the latter comes from the LiPF6-induced ring-opening polymerization of the ether solvent. This novel surface chemistry significantly improves the CE of Li negative electrode, revealing its importance for the practical application of lithium metal batteries.

Sign in / Sign up

Export Citation Format

Share Document