Behavior of an Embankment with a Reinforced Slope on Column Improved Clay Deposits

Author(s):  
Jinchun Chai ◽  
Sajib Khan ◽  
Sailesh Shrestha
1959 ◽  
Author(s):  
Maxwell McMichael Knechtel ◽  
Howard P. Hamlin ◽  
John W. Hosterman
Keyword(s):  

Author(s):  
Radosław Rogoziński ◽  
Alina Maciejewska

AbstractVarved clay deposits from ice-dammed lakes are a particularly important and broadly applied raw material used for the production of high-quality ceramics (red bricks, roof tiles, etc.), but the mineralogy and geochemistry of these sediments are not fully understood. The aim of the present study was to determine the chemical and mineralogical composition of ice-dammed lake sediments of the Lębork deposit. Major-element analysis of the compositions of selected samples from the ice-dammed lake clays was performed by X-ray fluorescence (XRF) and trace elements were determined by inductively coupled plasma-mass spectrometry. The mineralogical composition of clay samples was determined by X-ray diffraction (XRD). Analyses of the chemical composition of the ice-dammed lake clays of the Lębork deposit showed that the dominant component was SiO2 with a mean content of 56.13 wt.%; the second most abundant component was Al2O3, with a mean content for the entire deposit of 11.61 wt.%. Analysis by ICP-MS indicated the presence of rare earth elements (REE), e.g. cerium, neodymium, lanthanum, and praseodymium; their mean contents are: 56.9, 27.0, 26.3, and 7.3 ppm, respectively. Mineralogical analysis of the varved clays identified quartz, muscovite, calcite, and clay minerals – illite, kaolinite, and montmorillonite. The material filling the Lębork basin is characterized by small lateral and vertical variability in chemical composition. The results of the present study may be of considerable importance in determining the parent igneous, metamorphic, and sedimentary rocks, the weathering products of which supplied material to the ice-dammed lake, as well as in determining the mechanisms and character of the sedimentation process itself.


2018 ◽  
Vol 186 ◽  
pp. 243-255 ◽  
Author(s):  
Elias Salameh ◽  
Mathias Toll ◽  
Marwan Al Raggad
Keyword(s):  

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Yasin Erdoğan

Handere clay deposits were discovered at Adana in Turkey. These clay units primarily consist of uncoloured claystone, pebbly sandstone, sandstone, siltstone, and mudstone marl and include gypsum lenses and clay levels of various thicknesses in places. The physicochemical properties of these clays have been investigated by different techniques including Scanning Electron and Elemental Analysis (SEM and EDS), mineralogical analyses, chemical and physical analyses, X-ray diffraction (XRD), thermogravimetric differential thermal analysis (TG-DTA), and Atterberg (Consistency) Limits Test. The mineralogical composition deduced from XRD is wide (smectite + palygorskite + illite ± feldspar ± chlorite ± quartz ± calcite ± serpentine) due to the high smectite contents (≈85%). SEM studies reveal that smectite minerals are composed of irregular platy leaves and show honeycomb pattern in the form of wavy leaves in places. The leaves presenting an array with surface edge contact are usually concentrated in the dissolution voids and fractures of volcanic glass. Organic matter content and loss on ignition analysis of raw materials are good for all the studied samples. In summary, Handere clays can be used as building materials in bricks, roof tiles, and cement and as a binder.


Science ◽  
1906 ◽  
Vol 24 (624) ◽  
pp. 782-782 ◽  
Author(s):  
O. VEATCH
Keyword(s):  

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 296
Author(s):  
Jessica D. DeWitt ◽  
Peter G. Chirico ◽  
Marissa A. Alessi ◽  
Kathleen M. Boston

Reconstruction and urban development in Kabul, Afghanistan, has prompted vast expansion of the clay quarrying and brick making industry. This study identified the extent and distribution of clay quarrying and brick kilns in the greater Kabul area between 1965 and 2018. Very high-resolution satellite imagery was interpreted to quantify and characterize the type, number, and location of brick kilns for 1965, 2004, 2011, and 2018. Geospatial analysis of kilns together with geologic data and the results of hyperspectral image analysis yielded information regarding the extent of relevant mineral resources. Finally, kernel density analysis of kiln locations for each date called attention to their shifting spatial distribution. The study found that the clay quarrying and brick making industry has expanded exponentially. The type of kilns has transitioned from artisanal style clamp kilns to small-scale Bull’s Trench Kilns (BTK), and ultimately to Fixed Chimney Bull’s Trench Kilns (FCBTK). While quarrying has occurred entirely within quaternary windblown loess and clay deposits, artisanal clamp kilns were located in fine sediments containing montmorillonite and FCBTKs have developed in sediments containing calcite and muscovite. The study’s inventory of kilns was then used to estimate kiln workforce at 27,500 workers and production at 1.579 billion bricks per year.


Sign in / Sign up

Export Citation Format

Share Document