A Comprehensive Net Energy Analysis and Outlook of Energy System in China

2021 ◽  
Vol 6 (4) ◽  
Author(s):  
Hongshuo Yan ◽  
Lianyong Feng ◽  
Jianliang Wang ◽  
Yuanying Chi ◽  
Yue Ma
Keyword(s):  
Energy Analysis ◽  
Energy System ◽  
Net Energy

Net energy analysis of a fuelwood energy system

1983 ◽  
Vol 5 (1) ◽  
pp. 45-64 ◽  
Author(s):  
Tony J. Baltic ◽  
David R. Betters
Keyword(s):  
Energy Analysis ◽  
Energy System ◽  
Net Energy

scholarly journals Optimal Planning and Operation of a Residential Energy Community under Shared Electricity Incentives

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2045
Author(s):  
Pierpaolo Garavaso ◽  
Fabio Bignucolo ◽  
Jacopo Vivian ◽  
Giulia Alessio ◽  
Michele De Carli
Keyword(s):  
Renewable Energy ◽  
Power Distribution ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Distribution Networks ◽  
Building Envelope ◽  
Net Energy ◽  
Technical Equipment ◽  
Optimal Planning

Energy communities (ECs) are becoming increasingly common entities in power distribution networks. To promote local consumption of renewable energy sources, governments are supporting members of ECs with strong incentives on shared electricity. This policy encourages investments in the residential sector for building retrofit interventions and technical equipment renovations. In this paper, a general EC is modeled as an energy hub, which is deemed as a multi-energy system where different energy carriers are converted or stored to meet the building energy needs. Following the standardized matrix modeling approach, this paper introduces a novel methodology that aims at jointly identifying both optimal investments (planning) and optimal management strategies (operation) to supply the EC’s energy demand in the most convenient way under the current economic framework and policies. Optimal planning and operating results of five refurbishment cases for a real multi-family building are found and discussed, both in terms of overall cost and environmental impact. Simulation results verify that investing in building thermal efficiency leads to progressive electrification of end uses. It is demonstrated that the combination of improvements on building envelope thermal performances, photovoltaic (PV) generation, and heat pump results to be the most convenient refurbishment investment, allowing a 28% overall cost reduction compared to the benchmark scenario. Furthermore, incentives on shared electricity prove to stimulate higher renewable energy source (RES) penetration, reaching a significant reduction of emissions due to decreased net energy import.

scholarly journals Relationships of retained energy and retained protein that influence the determination of cattle requirements of energy and protein using the California Net Energy System

2018 ◽  
Vol 3 (3) ◽  
pp. 1029-1039 ◽  
Author(s):  
Luis O Tedeschi
Keyword(s):  
Body Fat ◽  
Energy System ◽  
The Body ◽  
Metabolizable Energy ◽  
Net Energy ◽  
Body Protein ◽  
Protein Requirements ◽  
Growing Cattle ◽  
Lower Correlation

Abstract Interrelationships between retained energy (RE) and retained protein (RP) that are essential in determining the efficiency of use of feeds and the assessment of energy and protein requirements of growing cattle were analyzed. Two concerns were identified. The first concern was the conundrum of a satisfactory correlation between observed and predicted RE (r = 0.93) or between observed and predicted RP when using predicted RE to estimate RP (r = 0.939), but a much lower correlation between observed and predicted RP when using observed RE to estimate RP (r = 0.679). The higher correlation when using predicted vs. observed RE is a concern because it indicates an interdependency between predicted RP and predicted RE that is needed to predict RP with a higher precision. These internal offsetting errors create an apparent overall adequacy of nutrition modeling that is elusive, thus potentially destabilizing the predictability of nutrition models when submodels are changed independently. In part, the unsatisfactory prediction of RP from observed RE might be related to the fact that body fat has a caloric value that is 1.65 times greater than body protein and the body deposition of fat increases exponentially as an animal matures, whereas body deposition of protein tends to plateau. Thus, body fat is more influential than body protein in determining RE, and inaccuracies in measuring body protein will be reflected in the RP comparison but suppressed in the RE calculation. The second concern is related to the disconnection when predicting partial efficiency of use of metabolizable energy for growth (kG) using the proportion of RE deposited as protein—carcass approach—vs. using the concentration of metabolizable energy of the diet—diet approach. The culprit of this disconnection might be related to how energy losses that are associated with supporting energy-expending processes (HiEv) are allocated between these approaches. When computing kG, the diet approach likely assigns the HiEv to the RE pool, whereas the carcass approach ignores the HiEV, assigning it to the overall heat production that is used to support the tissue metabolism. Opportunities exist for improving the California Net Energy System regarding the relationships of RE and RP in computing the requirements for energy and protein by growing cattle, but procedural changes might be needed such as increased accuracy in the determination of body composition and better partitioning of energy.

The use of temporal factors for improved CO2 emissions accounting in buildings

2018 ◽  
Vol 39 (2) ◽  
pp. 196-210 ◽  
Author(s):  
Barny Evans ◽  
Sabbir Sidat
Keyword(s):  
Air Quality ◽  
Energy Demand ◽  
Energy System ◽  
Net Energy ◽  
Electricity Grid ◽  
Electrical Grid ◽  
Significant Difference ◽  
Emissions Factor ◽  
Single Number ◽  
The Impact

This paper is an investigation into the issues around how we calculate CO2 emissions in the built environment. At present, in Building Regulations and GHG Protocol calculations used for buildings and corporate CO2 emissions calculations, it is standard to use a single number for the CO2 emission factor of each source. This paper considers how energy demand, particularly electricity at different times of the day, season and even year can differ in terms of its CO2 emissions. This paper models three different building types (retail, office and home) using standard software to estimate a profile of energy demand. It then considers how CO2 emissions calculations differ between using the single standard emissions factor and using an hourly emissions factor based on real electrical grid generation over a year. The paper also examines the impact of considering lifetime emissions factors rather than one-year factors using UK government projections. The results show that there is a significant difference to the analysis of benefit in terms of CO2 emissions from different measures – both intra- and inter-year – due to the varying CO2 emissions intensity, even when they deliver the same amount of net energy saving. Other factors not considered in this paper, such as impact on peak generation and air quality, are likely to be important when considering whole-system impacts. In line with this, it is recommended that moves are made to incorporate intra- and inter-year emissions factor changes in methodologies for calculating CO2 emissions. (This is particularly important as demand side response and energy storage, although generally accepted as important in the decarbonisation of the energy system at present will show as an increase in CO2 emissions when using a single number.) Further work quantifying the impact on air quality and peak generation capacity should also be considered. Practical application: This paper aims to help practitioners to understand the performance gap between how systems need to be designed in order to meet regulations compared to how buildings perform in reality – both today and in the future. In particular, it considers the use of ‘real-time’ carbon factors in order to attain long-term CO2 reductions. This methodology enables decision makers to understand the impacts of different energy reduction technologies, considering each of their unique characteristics and usage profiles. If implemented, the result is a simple-to-use dataset which can be embedded into the software packages already available onto the market which mirrors the complexity of the electricity grid that is under-represented through the use of a static carbon figure.

scholarly journals Digestion and nitrogen balance using swine diets containing increasing proportions of coproduct ingredients and formulated using the net energy system

2017 ◽  
Vol 95 (3) ◽  
pp. 1243 ◽  
Author(s):  
J. A. Acosta ◽  
R. D. Boyd ◽  
J. F. Patience
Keyword(s):  
Nitrogen Balance ◽  
Energy System ◽  
Net Energy ◽  
Swine Diets

scholarly journals 4E Analysis of a Fuel Cell and Gas Turbine Hybrid Energy System

2020 ◽  
Vol 11 (1) ◽  
pp. 7568-7579
Keyword(s):  
Fuel Cell ◽  
Cell Voltage ◽  
Energy System ◽  
High Energy ◽  
Exergy Efficiency ◽  
Combined Cycle ◽  
Net Energy ◽  
Exergy Destruction ◽  
Molten Carbonate ◽  
Ambient Temperatures

Exergy analysis of the expansion turbine hybrid cycle of integrated molten carbonate fuel cells is presented in this study. The proposed cycle was used as a sustainable energy curriculum to provide a small hybrid power plant with high energy efficiency. To generate electricity with the system mentioned above, and externally repaired fusion carbon fuel cell was used located at the top of the combined cycle. Moreover, the turbine and steam turbine systems are considered as complementary and bottom layers for co-generation, respectively. The results showed that the proposed system could reach net energy of up to 1125 kilowatts, while the total exergy efficiency (including electricity and heat) for this system is more than 68%. Moreover, the energy supplied and exergy efficiency derived from the proposed cycle are stable versus changes in ambient temperatures. Besides, the effect of increasing the current density on the cell voltage and the total exergy destruction was considered. Also, the new approaches of the exergoeconomics and exergoenvironmental analysis are implemented in this system. The results show that the hybrid system can decrease the exergy destruction costs more than 16%, and the environmental footprint of the system more than 23.4%.

Comprehensive Energy System Evaluation Model Based on Secondary Energy Analysis

2019 ◽  
Author(s):  
Kaiyuan Chen ◽  
Kaicheng Liu ◽  
Lei Chen ◽  
Gaoying Cui ◽  
Yinan Nie ◽  
...  
Keyword(s):  
Energy Analysis ◽  
Evaluation Model ◽  
Energy System ◽  
System Evaluation ◽  
Secondary Energy ◽  
Model Based

scholarly journals Mathematical absurdities in the California net energy system

2019 ◽  
Vol 3 (3) ◽  
pp. 1018-1028
Author(s):  
Carl A Old ◽  
Ian J Lean ◽  
Heidi A Rossow
Keyword(s):  
Linear Models ◽  
Energy System ◽  
High Energy ◽  
Ordinary Least Squares ◽  
Mitochondrial Metabolism ◽  
Energy Utilization ◽  
Parameter Estimates ◽  
Net Energy ◽  
High Energy Phosphate ◽  
Laws Of Thermodynamics

Abstract Net energy systems, such as the California Net Energy System (CNES), are useful for prediction of input:output relationships not because of fidelity to the laws of thermodynamics, but because they were designed to predict well. Unless model descriptions of input:output relationships are consistent with the laws of thermodynamics, conclusions regarding those relationships may be incorrect. Heat energy (HE) + recovered energy (RE) = ME intake (MEI) is basic to descriptions of energy utilization found in the CNES and is consistent with the laws of thermodynamics; it may be the only relationship described in the CNES consistent with the first law of thermodynamics. In the CNES, efficiencies of ME utilization for maintenance (km) and gain (kg) were estimated using ordinary least squares (OLS) equations. Efficiencies thus estimated using static linear models are often inconsistent with the biochemistry of processes underlying maintenance and gain. Reactions in support of oxidative mitochondrial metabolism are thermodynamically favorable and irreversible; these reactions yield ATP, or other high-energy phosphate bonds, used for what is generally termed maintenance. Synthesis of biomass (gain) is less thermodynamically favorable; reactions do not proceed unless coupled with hydrolysis of high-energy phosphate bonds and lie closer to equilibrium than those in support of oxidative mitochondrial metabolism. The opposite is described in the CNES (km > kg) due to failure of partitioning of HE; insufficient HE is accounted for in maintenance. Efficiencies of ME utilization (km and kg) as described in the CNES are variable. Further neither km nor kg are uniformly monotonic f (ME, Mcal/kg); for ME (Mcal/kg) <0.512 or >4.26, km are inconsistent with thermodynamically allowed values for efficiencies (>1.0); kg are a monotonically positive f (ME) concentration (Mcal/kg) for ME <3.27 Mcal/kg. For ME <1.42 Mcal/kg, kg are not in the range of thermodynamically allowed values for efficiencies (0 to 1.0). Variable efficiencies of ME utilization require that the first law may not be observed in all cases. The CNES is an excellent empirical tool for prediction of input:output relationship, but many CNES parameter estimates evaluated in this study lack consistency with biology and the laws of thermodynamics.

Sign in / Sign up

Export Citation Format

Share Document