scholarly journals Effect of various flow, sediment and geometrical parameters on partially or fully submerged deck scour

2021 ◽  
Vol 3 (3) ◽  
Author(s):  
Müsteyde Baduna Koçyiğit ◽  
Onur Karakurt ◽  
Hüseyin Akay
Keyword(s):  
Maximum Depth ◽  
Geometrical Parameters ◽  
Flow Depth ◽  
Clear Water ◽  
Flow Conditions ◽  
Flow Area ◽  
Sediment Size ◽  
Scour Hole ◽  
Series Of Experiments ◽  
Hole Effect

AbstractThe effect of various parameters of flow, sediment and geometric features of the bridge on the depth and shape of the scour hole occurred underneath a bridge deck model without a pier was investigated by a series of experiments conducted in a flume under partially and fully submerged flow and clear water conditions. The experiments were performed with factors such as approach flow depth, discharge, sediment size, degree of submergence, girder location and depth. A total of 112 experiments were conducted for both partially and fully submerged flow conditions. The experimental data showed that the partially submerged flow increased the maximum depth of scour hole and affected the shape of the scour hole more when compared to the fully submerged flow. It was also noted that parameters that directly affected flow structure in the bridge opening such as girder height might significantly increase the maximum depth of scour hole. Effect of the distance between a single girder and the bridge edge was also tested by using three different girder location and it was found that as the distance increased, the depth of the scour hole decreased and the location of the maximum scour depth moved with the girder to where the contraction in the flow area occurred.

Pressure flow and weir scour beneath a bridge deck

2019 ◽  
Vol 46 (6) ◽  
pp. 534-543
Author(s):  
Musteyde Baduna Kocyigit ◽  
Onur Karakurt
Keyword(s):  
Bridge Deck ◽  
Flow Depth ◽  
Clear Water ◽  
Hole Depth ◽  
Sediment Size ◽  
Bridge Model ◽  
Weir Flow ◽  
Water Conditions ◽  
Scour Hole ◽  
Series Of Experiments

In this study, a series of experiments in a flume was conducted to investigate the maximum scour hole depth that occurred due to the vertical contraction of the flow underneath a bridge deck model without a pier. The bridge model was tested under pressurized and weir type of flows governed by clear water conditions. Various parameters of flow, sediment, and geometric features of the bridge, such as approach flow depth, discharge, sediment size, girder depth and degree of submergence were varied to investigate their effects on the maximum depth of scour hole. A total of 102 experiments were conducted and two empirical equations were developed separately for pressure and weir flow types with the use of experimental data. Effects of the aforementioned parameters on the scour hole were also analyzed and discussed.

Experimental investigation of the effect of skew angle on partially or fully submerged deck scour

2020 ◽  
Vol 47 (9) ◽  
pp. 1027-1036
Author(s):  
Müsteyde Baduna Koçyiğit ◽  
Önder Koçyiğit ◽  
Hüseyin Akay ◽  
Gülay Demir
Keyword(s):  
Experimental Data ◽  
Bridge Deck ◽  
The Other ◽  
Flow Depth ◽  
Clear Water ◽  
Flow Conditions ◽  
Skew Angle ◽  
Hole Depth ◽  
Scour Hole ◽  
Contraction Scour

This paper presents the results of an experimental study investigating the effect of skew angle on clear-water contraction scour under a bridge deck at partially and fully submerged flow conditions. Two bridge deck models without a pier, one of which was located perpendicular to the flow while the other one was located with skewness of 15°, were used in the study. Forty experiments were performed for each deck model, 24 of which were under partially submerged and 16 were under fully submerged flow conditions. Analysis of the experimental data showed that as the discharge and approach flow depth increased, the maximum scour hole depth under the skewed deck model increased up to 25%–66% for fully submerged flow and 17%–57% for partially submerged flow conditions. Furthermore, the effect of skew angle significantly enlarged the width of the scour hole as you move along the skewed deck.

scholarly journals Effect of L-shaped slots on scour around a bridge abutment

2021 ◽  
Author(s):  
Neveen Y. Saad ◽  
Ehab M. Fattouh ◽  
M. Mokhtar
Keyword(s):  
Laboratory Experiments ◽  
Vertical Wall ◽  
Clear Water ◽  
Flow Conditions ◽  
Bridge Abutment ◽  
Scour Hole ◽  
Bed Materials ◽  
Bridge Failure ◽  
Study Laboratory ◽  
Area And Volume

Abstract Local scour is the most significant cause of bridge failure. Providing a short abutment with a straight slot has proved to be an effective method for reducing scour at this abutment. In this study, laboratory experiments have been conducted to investigate the effectiveness of using L-shaped slots in comparison to the commonly used straight slot, on the scour reduction at short vertical-wall abutment under clear-water flow conditions and uniform bed materials. The slots were just above the bed and their diameters equal to half the abutment's length. The results illustrated that it is essential to have a straight slot in any combination of slots, as any configuration without one is inefficient. Also, a combination of a straight slot with one side slot in the middle of the abutment's width gives better performance than an individual straight slot, as it reduces the depth, area, and volume of the scour hole by about 32.6, 26.8, and 43.6% respectively, in comparison to 23.2, 20.7, and 35.3% for the straight slot alone.

scholarly journals Scour Evolution Downstream of Submerged Weirs in Clear Water Scour Conditions

Water ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1746 ◽  
Author(s):  
Dawei Guan ◽  
Jingang Liu ◽  
Yee-Meng Chiew ◽  
Yingzheng Zhou
Keyword(s):  
Coarse Sand ◽  
Analytical Models ◽  
Scour Depth ◽  
Coastal Environments ◽  
Flow Depth ◽  
Clear Water ◽  
Submerged Condition ◽  
Initial Stage ◽  
Scour Hole ◽  
Weir Height

Although weirs or dikes in the riverine and coastal environments are frequently overtopped, few studies have hitherto examined the evolution of the scour process downstream of these structures under the submerged condition. This paper presents an experimental investigation on time evolution of the scour process downstream of submerged weirs with a uniform coarse sand. The clear-water scour experiments were carried out in a tilting recirculation flume. Different flow intensities and overtopping ratios (approach flow depth/weir height) were adopted in the experiments. Experimental observations show that the scour hole downstream of submerged weirs develops very fast in the initial stage, before progressing at a decreasing rate and eventually reaching the equilibrium stage. The results show that an increase of the overtopping ratio or flowrate can generate larger scour depth and volume downstream of the weir. Moreover, geometrical similarity of the scour hole that formed downstream of the weir was observed in the tests. Finally, empirical equations for predicting scour hole geometrical evolutions downstream of the submerged weirs were presented. The results of this study are useful in the development of numerical/analytical models capable of estimating the scour depth downstream of weirs in the river or coastal areas, for which the overtopping conditions are present.

scholarly journals Steady and unsteady pressure scour under bridges at clear-water conditions

2016 ◽  
Vol 43 (4) ◽  
pp. 334-342 ◽  
Author(s):  
Serife Yurdagul Kumcu
Keyword(s):  
Bridge Deck ◽  
Transportation Network ◽  
Water Pressure ◽  
Clear Water ◽  
Flow Conditions ◽  
Experimental Conditions ◽  
Pressure Flow ◽  
Equilibrium Pressure ◽  
Sediment Size ◽  
Pressure Scour

Bridges are vital components of the transportation network and if they are damaged or destroyed during a flood, they isolate communities and limit movement of supplies and emergency services. Evaluating their constructional stability and structural response after a flood event is critical for bridge safety. Bridge studies are usually designed with an assumption of an open channel flow condition, but the flow regime can switch to pressure flow if the downstream edge of a bridge deck is partially or totally submerged during a large flood. The main goal of this paper is to study the pressurized flow scour under a bridge deck and downstream deposition that results from eroded sediment material governed by both steady and unsteady clear-water flow conditions. Experimental conditions used in this study involve clear-water scour of a sand bed of given median sediment size d50 = 0.90 mm and sediment uniformity σg = 1.29, an approach flow characterized by a flow depth and velocity, a rectangular-shaped bridge deck, and a stepwise flood hydrograph defined by its time to peak and peak discharge. Different flow conditions were considered in confined flow under the bridge deck. Relationship between pressure-flow scour and flow conditions is presented and discussed under the obtained experimental data. Additionally, effects of single-peaked stepwise flow hydrographs (unsteady flow conditions) on bridge pier scour depth are investigated under clear-water pressure-flow conditions, whereas previous researches mainly focused on the equilibrium pressure scour under steady flow conditions.

scholarly journals Morphological Patterns at River Contractions

Water ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1683
Author(s):  
Giuseppe Oliveto ◽  
Maria Cristina Marino
Keyword(s):  
Rectangular Channel ◽  
Experimental Investigations ◽  
Clear Water ◽  
Flow Conditions ◽  
Flow Area ◽  
Mobile Bed ◽  
Long Duration ◽  
The University ◽  
Working Section ◽  
Morphological Patterns

Sediment transport at river contractions is an important process of engineering concern which might occur when a river encounters a reduction in flow area because of either natural or artificial constraints. This paper focuses on the morphological patterns that are prone to form at and around the constriction of watercourses based on experimental investigations at laboratory scale. Experiments were carried out at the University of Basilicata, Italy, in a 1 m wide and 20 m long rectangular channel. The length of the working section extended up to 16 m, according to the length of the contraction model. Two nearly-uniform sediments were used as mobile bed, sand with median grain size d50 = 1.7 mm and gravel with d50 = 9.0 mm. The contraction length was either 0.5, 1.0, 2.0 or 3.0 m. Runs were carried out under steady flow and clear-water approach flow conditions. Typically, they were of long duration (up to 15 days) also to achieve an equilibrium state. New predictive equations are given on the temporal progress of: the maximum scour depth, the scour hole length, and the axial bed profile with emphasis on the processes of bed aggradation or degradation beyond the contracted region.

Modelling solid transport in building drainage systems

1996 ◽  
Vol 33 (9) ◽  
pp. 9-16 ◽  
Author(s):  
John A. Swaffield ◽  
John A. McDougall
Keyword(s):  
Decision Making ◽  
Boundary Conditions ◽  
Numerical Solution ◽  
Water Conservation ◽  
Transient Flow ◽  
Drainage System ◽  
System Model ◽  
Flow Depth ◽  
Flow Conditions ◽  
Solid Transport

The transient flow conditions within a building drainage system may be simulated by the numerical solution of the defining equations of momentum and continuity, coupled to a knowledge of the boundary conditions representing either appliances discharging to the network or particular network terminations. While the fundamental mathematics has long been available, it is the availability of fast, affordable and accessible computing that has allowed the development of the simulations presented in this paper. A drainage system model for unsteady partially filled pipeflow will be presented in this paper. The model is capable of predicting flow depth and rate, and solid velocity, throughout a complex network. The ability of such models to assist in the decision making and design processes will be shown, particularly in such areas as appliance design and water conservation.

Evaluation of Selected Pier-Scour Equations Using Field Data

1996 ◽  
Vol 1523 (1) ◽  
pp. 186-195 ◽  
Author(s):  
Mark N. Landers ◽  
David S. Mueller
Keyword(s):  
Field Measurements ◽  
Bridge Piers ◽  
Critical Ratio ◽  
Scour Depth ◽  
Flow Depth ◽  
Clear Water ◽  
Pier Scour ◽  
Logarithmic Space ◽  
State Highway ◽  
Federal Highway

Field measurements of channel scour at bridges are needed to improve the understanding of scour processes and the ability to accurately predict scour depths. An extensive data base of pier-scour measurements has been developed over the last several years in cooperative studies between state highway departments, the Federal Highway Administration, and the U.S. Geological Survey. Selected scour processes and scour design equations are evaluated using 139 measurements of local scour in live-bed and clear-water conditions. Pier-scour measurements were made at 44 bridges around 90 bridge piers in 12 states. The influence of pier width on scour depth is linear in logarithmic space. The maximum observed ratio of pier width to scour depth is 2.1 for piers aligned to the flow. Flow depth and scour depth were found to have a relation that is linear in logarithmic space and that is not bounded by some critical ratio of flow depth to pier width. Comparisons of computed and observed scour depths indicate that none of the selected equations accurately estimate the depth of scour for all of the measured conditions. Some of the equations performed well as conservative design equations; however, they overpredict many observed scour depths by large amounts. Some equations fit the data well for observed scour depths less than about 3 m (9.8 ft), but significantly underpredict larger observed scour depths.

Clear-water local scour at wide piers in shallow-water flow

2014 ◽  
Vol 9 (3) ◽  
pp. 331-343 ◽  
Author(s):  
N. Ahmad ◽  
T. Mohamed ◽  
F. H. Ali ◽  
B. Yusuf
Keyword(s):  
Laboratory Data ◽  
Local Scour ◽  
The Other ◽  
Scour Depth ◽  
Temporal Development ◽  
Clear Water ◽  
Shallow Water Flow ◽  
Equilibrium Time ◽  
Sediment Size ◽  
Flow Intensity

Laboratory data for local scour depth regarding the size of wide piers are presented. Clear water scour tests were performed for various pier widths (0.06, 0.076, 0.102, 0.14 and 0.165 m), two types of pier shapes (circular and rectangular) and two types of uniform cohesionless bed sediment (d50 = 0.23 and d50 = 0.80 mm). New data are presented and used to demonstrate the effects of pier width, pier shape and sediment size on scour depth. The influence of equilibrium time (te) on scouring processes is also discussed. Equilibrium scour depths were found to decrease with increasing values of b/d50. The temporal development of equilibrium local scour depth with new laboratory data is demonstrated for flow intensity V/Vc = 0.95. On the other hand, the results of scour mechanism have shown a significant relationship between normalized volume of scoured and deposited with pier width, b. The experimental data obtained in this study and data available from the literature for wide piers are used to evaluate predictions of existing methods.

Sign in / Sign up

Export Citation Format

Share Document