scholarly journals Mechanical properties of plasma polymer films: a review

2021 ◽  
Vol 3 (6) ◽  
Author(s):  
Jamerson Carneiro de Oliveira ◽  
Aissam Airoudj ◽  
Philippe Kunemann ◽  
Florence Bally-Le Gall ◽  
Vincent Roucoules

Abstract Plasma polymers are micro-, or more commonly, nano-sized coatings that can be deposited on a variety of substrates through different approaches. The versatility of these polymers is incremented by the possibility to use other precursors than conventional polymerization reactions and by potential changes in the polymerization mechanisms according to the intrinsic physical and chemical properties of the plasma. That flexibility offers a fruitful ground to a great range of scientific and engineering fields, but it also brings many challenges for universalization of empirical observations. In this review, the use of different precursors, substrates and changes in plasma external parameters were evaluated as common, but not necessarily ideal nor exhaustive, variables for the analysis of mechanical properties of plasma polymer films. The commonly reported trends are complemented with the exceptions, and a variety of hypothesis drawn by the empirical observations are shown. The techniques and methods used for determining the mechanical properties of plasma polymers, the effect of post-treatments on them and some applications are evaluated. Finally, a general conclusion highlighting the challenges of the field is provided. Article highlights The mechanical properties of plasma polymers are evaluated as a function of selected parameters. The techniques of characterization of mechanical properties of plasma polymers are summarized. A discussion of future and current demands for the analysis of mechanical properties of plasma polymers is done.

2021 ◽  
Vol 316 ◽  
pp. 51-55
Author(s):  
Tamara I. Shishelova ◽  
Vadim V. Fedchishin ◽  
Mikhail A. Khramovskih

Rapid expansion of technologies poses higher requirements to structural materials and items made of them. Conventional materials are being replaced by composite materials (composites). Different additives enhancing the properties of initial materials are used as reinforcement fibers of composites. Utilization of micro-and nanosize particles for production of present-day materials is paid much attention to. Whiskers are among such materials. These crystals have high strength, high chemical and temperature resistance. But for rational utilization of whickers of different chemical composition in composite materials one should know their physical and chemical properties. Objectives of the paper: to study physical and chemical properties of whiskers in different compounds, their composition and structure; to prove experimentally the feasibility of utilizing whiskers as a reinforcement fiber of composite materials. Object of study: specimens of whiskers of silicon nitride (Si3N4), aluminum oxide (Al2O3), aluminum nitride (AlN), and mullite (Al6Si2O13). Methods of investigation: thermal study of specimens, study of mechanical properties and chemical strength, and IR-spectroscopy. Results of study: specimens of whiskers have been studied and their mechanical properties have been tabulated for comparison. Extensive thermal investigation was followed by deduction of regularities and identification of chemical properties of whiskers. IR-spectra of whiskers have been studied and conclusions on molecular composition and on presence of impurities in some whiskers have been made.


Author(s):  
Tjokorda Gde Tirta Nindhia ◽  
Zdenek Knejzlík ◽  
Tomáš Ruml ◽  
I Wayan Surata ◽  
Tjokorda Sari Nindhia

Silk can be produced by spider or insect and have prospect as biomaterial for regenerative healing in medical treatment. Silk having physical and chemical properties that support biocompatibility in the living things..In this research, silk that was obtained from Indonesia natural resource of Attacus atlas silkmoth was explored and then will be  developed for biocompatible biomaterial. The treatment with NaOH was developed to separate the fiber from the cocoon. The obtained fiber is investigated its mechanical property by performing tensile test for single fiber. The biocompatibility testing was conducted with human cell (osteosarccoma) cultivation. The result identify that separation by using NaOH yield better better mechanical properties comparing konvenstional method with boiling in hot water. Biocompatibility testing indicate that the the fiber having good biocompatibility.


Química Nova ◽  
2021 ◽  
Author(s):  
Kamila Ody ◽  
João Jesus ◽  
Carlos Cava ◽  
Anderson Albuquerque ◽  
Ary Maia ◽  
...  

ASSESSMENT OF THE ELECTRONIC STRUCTURE OF THE MONOCLINIC PHASE OF NIOBIUM OXIDE BASED ON THE USE OF DIFFERENT DENSITY FUNCTIONALS. Niobium oxides, Nb2O5, are considered semiconductor materials with very attractive physical and chemical properties for applications in many areas, such as catalysis, sensors, medical, aerospace, etc. Especially, the characterization of Nb2O5-based nanostructures with monoclinic structure has received much attention in recent years. However, despite the great importance of this system, some of its fundamentals properties are still not fully understood. Hence, this work aims to apply the theoretical methodologies through Density Functional Theory (DFT) calculations in periodic models based on the use of different density functionals (like B1WC, B3PW, B3LYP, PBE0, PBESOL0, SOGGAXC, and WC1LYP) to investigate the physical and chemical properties of the monoclinic structure of Nb2O5. The band structures, energy bandgap, density of state, and vibrational properties, as well as order-disorder effects on the monoclinic structure of Nb2O5 are investigated in this study. Our theoretical results show a better agreement with experimental data for the B3LYP functional and hence lead to new perspectives on the deeper physicochemical understanding of the monoclinic Nb2O5. From these computational tools, it is possible to unravel the relations between structure and properties, which may contribute to the future development of new devices and applications based on these materials.


2019 ◽  
Vol 40 (6) ◽  
pp. 2581
Author(s):  
Adriana Cristina Bordignon ◽  
Maria Luiza Rodrigues de Souza ◽  
Eliane Gasparino ◽  
Edson Minoru Yajima ◽  
Jesuí Vergílio Visentainer ◽  
...  

After Nile tilapia skin was preserved using the methods of freezing and dry salting, characteristics of skin gelatin were evaluated with regard to yield, rheological features and physical and chemical properties. Preservation was performed after filleting, at which time skins were either frozen (-18°C) for 7 days or salted (25°C) for 7 days. Although no differences (p > 0.05) were observed with respect to humidity, protein, lipid, ash and calcium levels, gelatin from salted skins had a higher concentration of iron relative to frozen skins. Further, twenty-three fatty acids were detected in salted skins compared with merely three found in skin derived gelatin. Of amino acids found, glycine, alanine, proline and arginine were the most abundant. Hydroxyproline abundance in salted and frozen skin gelatin were 8.76% and 8.71%, respectively. In addition, salted skin gelatins had a greater accumulation of saturated fatty acids and lower rates of monounsaturated fatty acids. Salted skin gelatin had the highest yield (18g × 100g-1), gel strength (200 g) and viscosity (19.02mPas) when compared to the yield (17g × 100g-1), gel strength (12.7g) and viscosity (9.16 mPas) of frozen skins. Results show that gelatin from dry salted skin had the best yield and also had relatively better rheological properties, more iron, and better coloration relative to gelatin obtained from frozen skins of Nile tilapia.


1987 ◽  
Vol 65 (4) ◽  
pp. 884-887 ◽  
Author(s):  
A. J. Sillman

The blue-sensitive visual pigment of the green rods of Bufo marinus was extracted with digitonin. The pigment is present in an amount equal to about 11% that of rhodopsin. It is based on vitamin A1 and exhibits a maximum absorbance of 433 nm. The pigment is labile and readily destroyed by hydroxylamine, regenerates to a much greater degree than does rhodopsin, and is more effectively extracted from the membrane than is rhodopsin. The green rod pigment of Bufo marinus appears to share the same physical and chemical properties as the green rod pigments of other amphibians. Therefore, the results of electrophysiological studies on the green rods of Bufo marinus can be more confidently generalized to other species. The results are discussed in terms of the blue phototaxis that is characteristic of many amphibians.


2014 ◽  
Vol 899 ◽  
pp. 409-414 ◽  
Author(s):  
Alena Struhárová ◽  
Stanislav Unčík ◽  
Svetozár Balkovic ◽  
Mária Hlavinková

Fluidized fly ash has different physical and chemical properties compared to fly ash emerging from classic combustion. It contains amorphous phases resulting from a dehydration of clay minerals as well as unreacted sorbent of CaCO3, free CaO and anhydrite (CaSO4). Work targets the possibilities of production of an autoclaved aerated concrete (AAC) from fluidized fly ash, and its influence on particular physical-mechanical properties of autoclaved aerated concrete.


2014 ◽  
Vol 16 (29) ◽  
pp. 15053-15067 ◽  
Author(s):  
L. Treuel ◽  
K. A. Eslahian ◽  
D. Docter ◽  
T. Lang ◽  
R. Zellner ◽  
...  

Whilst the physical and chemical properties of nanoparticles in the gas or idealized solvent phase can nowadays be characterized with sufficient accuracy, this is no longer the case for particles in the presence of a complex biological environment.


Sign in / Sign up

Export Citation Format

Share Document