Characterization of rare-earth oxysulfide E.L. complex center in ZnS thin film

The continuous demands of the computer industry for increased reliability, portability, and density of storage media, has opened a new chapter in the magnetic recording research, by focusing on the viability of magneto-optical materials for storage. Several materials are considered presently to be at the forefront of this new quest: ternary rare-earth transition-metal alloys (such as GdTbFe or TbFeCo), garnets, and Co/Pt or Co/Pd mutilayers. Of these, the ferrimagnetic garnets, due to their relatively flexible structure, may accommodate a large number of substituting ions, allowing thus for a very good control of their magnetic and magneto-optical properties. The good results obtained during thegrowth of epitaxial superconducting oxide thin films by pulsed laser deposition (PLD), has encouragedus to try this novel deposition technique in the growth of multilayered heteroepitaxial ferrimagneticiron garnet thin films.Superlattice heterostructures consisting of alternating single crystalline ferrimagnetic yttrium-iron-garnet (YIG) and bismuth-iron-garnet (BIG) thin film layers, as well as alternating YIG and europiumsubstituted BIG (EBIG), were deposited on single crystalline (111) paramagnetic gadolinium-galliumgarnet (GGG) substrates.

Download Full-text

Production and characterization of thin film group IIIB, IVB and rare earth hydrides by reactive evaporation

Journal of Vacuum Science & Technology A Vacuum Surfaces and Films ◽

10.1116/1.4919929 ◽

2015 ◽

Vol 33 (4) ◽

pp. 041507 ◽

Cited By ~ 2

Author(s):

James L. Provo

Keyword(s):

Thin Film ◽

Rare Earth ◽

Reactive Evaporation ◽

Film Group

Download Full-text

Characterization of Y-Ba-Cu-O films grown on silicon substrates by sequential evaporation

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100106399 ◽

1988 ◽

Vol 46 ◽

pp. 866-867

Author(s):

E. L. Hall ◽

A. Mogro-Campero ◽

L. G. Turner ◽

N. Lewis

Keyword(s):

Thin Film ◽

Thin Film Deposition ◽

Superconducting Films ◽

Electron Beam Evaporation ◽

Film Deposition ◽

Silicon Substrates ◽

Superconducting Properties ◽

Sequential Electron ◽

Thin Superconducting Films

There is great interest in the growth of thin superconducting films of YBa2Cu3Ox on silicon, since this is a necessary first step in the use of this superconductor in a variety of possible electronic applications including interconnects and hybrid semiconductor/superconductor devices. However, initial experiments in this area showed that drastic interdiffusion of Si into the superconductor occurred during annealing if the Y-Ba-Cu-O was deposited direcdy on Si or SiO2, and this interdiffusion destroyed the superconducting properties. This paper describes the results of the use of a zirconia buffer layer as a diffusion barrier in the growth of thin YBa2Cu3Ox films on Si. A more complete description of the growth and characterization of these films will be published elsewhere.Thin film deposition was carried out by sequential electron beam evaporation in vacuum onto clean or oxidized single crystal Si wafers. The first layer evaporated was 0.4 μm of zirconia.

Download Full-text

Microstructural and fractographic characterization of B4C-Al cermets tested under dynamic and static loading

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100154780 ◽

1989 ◽

Vol 47 ◽

pp. 562-563

Author(s):

Gyeung Ho Kim ◽

Mehmet Sarikaya ◽

D. L. Milius ◽

I. A. Aksay

Keyword(s):

Thin Film ◽

Mechanical Properties ◽

Fracture Toughness ◽

Static Loading ◽

Carbon Deposition ◽

Full Density ◽

Unique Combination ◽

Strong Component ◽

Reaction Products

Cermets are designed to optimize the mechanical properties of ceramics (hard and strong component) and metals (ductile and tough component) into one system. However, the processing of such systems is a problem in obtaining fully dense composite without deleterious reaction products. In the lightweight (2.65 g/cc) B4C-Al cermet, many of the processing problems have been circumvented. It is now possible to process fully dense B4C-Al cermet with tailored microstructures and achieve unique combination of mechanical properties (fracture strength of over 600 MPa and fracture toughness of 12 MPa-m1/2). In this paper, microstructure and fractography of B4C-Al cermets, tested under dynamic and static loading conditions, are described.The cermet is prepared by infiltration of Al at 1150°C into partially sintered B4C compact under vacuum to full density. Fracture surface replicas were prepared by using cellulose acetate and thin-film carbon deposition. Samples were observed with a Philips 3000 at 100 kV.

Download Full-text

Microstructural characterization of a cast RENi5-based alloy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100151714 ◽

1993 ◽

Vol 51 ◽

pp. 1176-1177

Author(s):

G. M. Micha ◽

L. Zhang

Keyword(s):

Electron Microscopy ◽

Rare Earth ◽

Microstructural Characterization ◽

Binary Compound ◽

Nickel Metal ◽

Cast Material ◽

Nickel Metal Hydride ◽

Transmission Electron ◽

Cast Condition

RENi5 (RE: rare earth) based alloys have been extensively evaluated for use as an electrode material for nickel-metal hydride batteries. A variety of alloys have been developed from the prototype intermetallic compound LaNi5. The use of mischmetal as a source of rare earth combined with transition metal and Al substitutions for Ni has caused the evolution of the alloy from a binary compound to one containing eight or more elements. This study evaluated the microstructural features of a complex commercial RENi5 based alloy using scanning and transmission electron microscopy.The alloy was evaluated in the as-cast condition. Its chemistry in at. pct. determined by bulk techniques was 12.1 La, 3.2 Ce, 1.5 Pr, 4.9 Nd, 50.2 Ni, 10.4 Co, 5.3 Mn and 2.0 Al. The as-cast material was of low strength, very brittle and contained a multitude of internal cracks. TEM foils could only be prepared by first embedding pieces of the alloy in epoxy.

Download Full-text