X-ray diffraction data for a distorted brockite and its solid state reactions with Na2CO3

1983 ◽  
Vol 93 (2) ◽  
pp. 433-440 ◽  
Author(s):  
M. Kizilyalli ◽  
D.S. Jones ◽  
N. Evi̇n ◽  
H. Göktürk
Author(s):  
F. Ma ◽  
S. Vivekanand ◽  
K. Barmak ◽  
C. Michaelsen

Solid state reactions in sputter-deposited Nb/Al multilayer thin films have been studied by transmission and analytical electron microscopy (TEM/AEM), differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The Nb/Al multilayer thin films for TEM studies were sputter-deposited on (1102)sapphire substrates. The periodicity of the films is in the range 10-500 nm. The overall composition of the films are 1/3, 2/1, and 3/1 Nb/Al, corresponding to the stoichiometric composition of the three intermetallic phases in this system.Figure 1 is a TEM micrograph of an as-deposited film with periodicity A = dA1 + dNb = 72 nm, where d's are layer thicknesses. The polycrystalline nature of the Al and Nb layers with their columnar grain structure is evident in the figure. Both Nb and Al layers exhibit crystallographic texture, with the electron diffraction pattern for this film showing stronger diffraction spots in the direction normal to the multilayer. The X-ray diffraction patterns of all films are dominated by the Al(l 11) and Nb(l 10) peaks and show a merging of these two peaks with decreasing periodicity.


2018 ◽  
Vol 74 (5) ◽  
pp. 623-627 ◽  
Author(s):  
Sviatoslav Baranets ◽  
Hua He ◽  
Svilen Bobev

Three isostructural transition-metal arsenides and germanides, namely niobium nickel arsenide, Nb0.92(1)NiAs, niobium cobalt arsenide, NbCoAs, and niobium nickel germanide, NbNiGe, were obtained as inadvertent side products of high-temperature reactions in sealed niobium containers. In addition to reporting for the very first time the structures of the title compounds, refined from single-crystal X-ray diffraction data, this article also serves as a reminder that niobium containers may not be suitable for the synthesis of ternary arsenides and germanides by traditional high-temperature reactions. Synthetic work involving alkali or alkaline-earth metals, transition or early post-transition metals, and elements from groups 14 or 15 under such conditions may yield Nb-containing products, which at times could be the major products of such reactions.


2020 ◽  
Vol 151 (9) ◽  
pp. 1317-1328
Author(s):  
Matthias Weil ◽  
Berthold Stöger

Abstract The caesium phosphates Cs3(H1.5PO4)2(H2O)2 and Cs3(H1.5PO4)2 were obtained from aqueous solutions, and Cs4P2O7(H2O)4 and CsPO3 from solid state reactions, respectively. Cs3(H1.5PO4)2, Cs4P2O7(H2O)4, and CsPO3 were fully structurally characterized for the first time on basis of single-crystal X-ray diffraction data recorded at − 173 °C. Monoclinic Cs3(H1.5PO4)2 (Z = 2, C2/m) represents a new structure type and comprises hydrogen phosphate groups involved in the formation of a strong non-symmetrical hydrogen bond (accompanied by a disordered H atom over a twofold rotation axis) and a very strong symmetric hydrogen bond (with the H atom situated on an inversion centre) with symmetry-related neighbouring anions. Triclinic Cs4P2O7(H2O)4 (Z = 2, P$$\bar{1}$$ 1 ¯ ) crystallizes also in a new structure type and is represented by a diphosphate group with a P–O–P bridging angle of 128.5°. Although H atoms of the water molecules were not modelled, O···O distances point to hydrogen bonds of medium strengths in the crystal structure. CsPO3 is monoclinic (Z = 4, P21/n) and belongs to the family of catena-polyphosphates (MPO3)n with a repetition period of 2. It is isotypic with the room-temperature modification of RbPO3. The crystal structure of Cs3(H1.5PO4)2(H2O)2 was re-evaluated on the basis of single-crystal X-ray diffraction data at − 173 °C, revealing that two adjacent hydrogen phosphate anions are connected by a very strong and non-symmetrical hydrogen bond, in contrast to the previously described symmetrical bonding situation derived from room temperature X-ray diffraction data. In the four title crystal structures, coordination numbers of the caesium cations range from 7 to 12. Graphic abstract


2009 ◽  
Vol 64 (7) ◽  
pp. 875-878 ◽  
Author(s):  
Hamdi Ben Yahia ◽  
Etienne Gaudin ◽  
Jacques Darriet

The new compound AgMnPO4 has been synthesized by a solid-state reaction route. Its crystal structure was determined from single-crystal X-ray diffraction data. AgMnPO4 crystallizes with triclinic symmetry, space group P1̄, a = 9.6710(6), b = 5.695(2), c = 6.629(3) Å , α = 102.55(3), β = 105.85(2), γ = 80.70(2)◦, and Z = 4. Its structure is built up from MnO6, MnO5 and PO4 polyhedra forming tunnels filled with silver atoms.


2009 ◽  
Vol 65 (5) ◽  
pp. 639-646 ◽  
Author(s):  
Edward E. Ávila ◽  
Asiloé J. Mora ◽  
Gerzon E. Delgado ◽  
Ricardo R. Contreras ◽  
Luis Rincón ◽  
...  

The molecular and crystalline structure of ethyl 1′,2′,3′,4′,4a′,5′,6′,7′-octahydrodispiro[cyclohexane-1,2′-quinazoline-4′,1′′-cyclohexane]-8′-carbodithioate (I) was solved and refined from powder synchrotron X-ray diffraction data. The initial model for the structural solution in direct space using the simulated annealing algorithm implemented in DASH [David et al. (2006). J. Appl. Cryst. 39, 910–915] was obtained performing a conformational study on the fused six-membered rings of the octahydroquinazoline system and the two spiran cyclohexane rings of (I). The best model was chosen using experimental evidence from 1H and 13C NMR [Contreras et al. (2001). J. Heterocycl. Chem. 38, 1223–1225] in combination with semi-empirical AM1 calculations. In the refined structure the two spiran rings have the chair conformation, while both of the fused rings in the octahydroquinazoline system have half-chair conformations compared with in-vacuum density-functional theory (DFT) B3LYP/6-311G*, DFTB (density-functional tight-binding) theoretical calculations in the solid state and other related structures from X-ray diffraction data. Compound (I) presents weak intramolecular hydrogen bonds of the type N—H...S and C—H...S, which produce delocalization of the electron density in the generated rings described by graph symbols S(6) and S(5). Packing of the molecules is dominated by van der Waals interactions.


2006 ◽  
Vol 179 (10) ◽  
pp. 3214-3223 ◽  
Author(s):  
Zhigang Pan ◽  
Mingcan Xu ◽  
Eugene Y. Cheung ◽  
James A. Platts ◽  
Kenneth D.M. Harris ◽  
...  

2011 ◽  
Vol 415-417 ◽  
pp. 468-471
Author(s):  
Qiao Hong Yu ◽  
Zheng Fa Li ◽  
Yong Xiang Li ◽  
Ping Zhan Si ◽  
Jiang Ying Wang ◽  
...  

New compounds of sodium samarium titanate Na0.5Sm4.5Ti4O15and sodium europium titanate Na0.5Eu4.5Ti4O15were synthesized successfully by solid state reaction at 1300 oC and 1200 oC, respectively. The lattice parameters of Na0.5Sm4.5Ti4O15and Na0.5Eu4.5Ti4O15were determined at ordinary temperature by using X-ray powder diffraction method. Their Lattice types were determined, and their patterns were indexed. Polycrystalline X-ray diffraction data of sodium samarium titanate were listed. Differences of their crystal structures were analyzed and discussed.


1994 ◽  
Vol 9 (3) ◽  
pp. 648-657 ◽  
Author(s):  
J.S. Chen ◽  
E. Kolawa ◽  
M-A. Nicolet ◽  
R.P. Ruiz ◽  
L. Baud ◽  
...  

Thermally induced solid-state reactions between a 70 nm Pt film and a single-crystal (001) β-SiC substrate at temperatures from 300 °C to 1000 °C for various time durations are investigated by 2 MeV He backscattering spectrometry, x-ray diffraction, secondary ion mass spectrometry, scanning electron microscopy, and cross-sectional transmission electron microscopy. Backscattering spectrometry shows that Pt reacts with SiC at 500 °C. The product phase identified by x-ray diffraction is Pt3Si. At 600–900 °C, the main reaction product is Pt2Si, but the depth distribution of the Pt atoms changes with annealing temperature. When the sample is annealed at 1000 °C, the surface morphology deteriorates with the formation of some dendrite-like hillocks; both Pt2Si and PtSi are detected by x-ray diffraction. Samples annealed at 500–900 °C have a double-layer structure with a silicide surface layer and a carbon-silicide mixed layer below in contact with the substrate. The SiC—Pt interaction is resolved at an atomic scale with high-resolution electron microscopy. It is found that the grains of the sputtered Pt film first align themselves preferentially along an orientation of {111}Pt//{001}SiC without reaction between Pt and SiC. A thin amorphous interlayer then forms at 400 °C. At 450 °C, a new crystalline phase nucleates discretely at the Pt-interlayer interface and projects into or across the amorphous interlayer toward the SiC, while the undisturbed amorphous interlayer between the newly formed crystallites maintains its thickness. These nuclei grow extensively down into the substrate region at 500 °C, and the rest of the Pt film is converted to Pt3Si. Comparison between the thermal reaction of SiC-Pt and that of Si–Pt is discussed.


Sign in / Sign up

Export Citation Format

Share Document