Corrosion failure of Al-Mg alloy bonding wires in plastic packages

1987 ◽  
Vol 27 (3) ◽  
pp. 582
Author(s):  
C. K. Wu

The precipitation phenomenon in Al-Zn-Mg alloy is quite interesting and complicated and can be described in the following categories:(i) heterogeneous nucleation at grain boundaries;(ii) precipitate-free-zones (PFZ) adjacent to the grain boundaries;(iii) homogeneous nucleation of snherical G.P. zones, n' and n phases inside the grains. The spherical G.P. zones are coherent with the matrix, whereas the n' and n phases are incoherent. It is noticed that n' and n phases exhibit plate-like morpholoay with several orientation relationship with the matrix. The high resolution lattice imaging techninue of TEM is then applied to study precipitates in this alloy system. It reveals the characteristics of lattice structures of each phase and the orientation relationships with the matrix.


2013 ◽  
Vol 51 (5) ◽  
pp. 325-332 ◽  
Author(s):  
Sung Hyuk Park ◽  
Seong-Gu Hong ◽  
Chong Soo Lee ◽  
Ha Sik Kim

2010 ◽  
Vol 48 (04) ◽  
pp. 305-314 ◽  
Author(s):  
Byung Jo Jung ◽  
Myung Jae Lee ◽  
Yong Bum Park
Keyword(s):  
Mg Alloy ◽  

2016 ◽  
Vol 54 (2) ◽  
pp. 79-88
Author(s):  
Chung-yun Kang ◽  
Hee-Geun Lee ◽  
Tae-jin Yoon
Keyword(s):  

2019 ◽  
Vol 16 (2) ◽  
Author(s):  
M. N. Setia Nusa

Water pipe of 4.5” diameter and has been operated for 8 year having failure due to corrosion attack on its external and internal surface. It is conducted failure analysis to find out the cause of corrosion by having testing examination of visual fractography, metalography,, SEM EDAX, hardness and chemical composition. Testing and examination results show that the failure / corroded pipe has a for in of general corrosion on the external surface due to environment factor or ground factor arround the pipe and on the internal surface was influenced by excessive root weld creating protrude which then causing turbolens and deposite to accelerate corrosion attack.Pipa berdiameter 4.5” yang berfungsi mengalirkan air bersih dan telah beroperasi selama 8 tahun, terjadi kerusakan berbentuk korosi pada permukaan luar pipa dan permukaan dalam. Untuk itu dilakukan analisa kerusakan untuk mengetahui penyebab terjadinya korosi dengan pengujian dan pemeriksaan secara visual,Fractography, Metallography, SEM, EDAX, Uji Kekerasan dan Uji Komposisi Kimia. Hasil pemeriksaan dan pengujian pada pipa yang rusak / korosi berbentuk jenis general korosi pada permukaan luar pipa yang diakibatkan faktor lingkungan atau tanah disekitar pipa, sedangkan pada bagian dalam pipa dipengaruhi oleh adanya lelehan pengelasan yang kurang sempurna sehingga menimbulkan benjolan yang mengakibatkan aliran air didalam pipa tidak lancar sehingga terjadi turbolensi yang menimbulkan endapan dan mengakibatkan percepatan terjadinya korosi.Keywords: Pipe, environtment, turbolens, corrosion, failure


2014 ◽  
Vol 56 (10) ◽  
pp. 837-841
Author(s):  
Aleksandar Sedmak ◽  
Abdasalam Mohamed Mahdi Eramah ◽  
Srđan Tadić ◽  
Srđa Perković ◽  
Horia Dascau

2018 ◽  
Vol 60 (10) ◽  
pp. 1021-1025 ◽  
Author(s):  
Liwei Lu ◽  
Zhenru Yin ◽  
Jun Zhao ◽  
Dongfeng Shi ◽  
Chuming Li

Sign in / Sign up

Export Citation Format

Share Document