Enhanced oil recovery profile control with crosslinked anionic acrylamide copolymer gels

1994 ◽  
Vol 20 (4) ◽  
pp. XVII
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Recovery Profile ◽  
Profile Control ◽  
Copolymer Gels

An Experimental Research on Enhanced Oil Recovery Using Local Polymers

2021 ◽  
Author(s):  
Abiola Oyatobo ◽  
Amalachukwu Muoghalu ◽  
Chinaza Ikeokwu ◽  
Wilson Ekpotu
Keyword(s):  
Enhanced Oil Recovery ◽  
Experimental Research ◽  
Oil Recovery ◽  
Capital Investment ◽  
Oil And Gas ◽  
Produced Water ◽  
Water Injection ◽  
Gum Arabic ◽  
Oil And Gas Industry ◽  
Profile Control

Abstract Ineffective methods of increasing oil recovery have been one of the challenges, whose solutions are constantly sought after in the oil and gas industry as the number of under-produced reservoirs increases daily. Water injection is the most extended technology to increase oil recovery, although excessive water production can pose huge damage ranging from the loss of the well to an increase in cost and capital investment requirement of surface facilities to handle the produced water. To mitigate these challenges and encourage the utilization of local contents, locally produced polymers were used in polymer flooding as an Enhanced Oil Recovery approach to increase the viscosity of the injected fluids for better profile control and reduce cost when compared with foreign polymers as floppan. Hence this experimental research was geared towards increasing the efficiency of oil displacement in sandstone reservoirs using locally sourced polymers in Nigeria and also compared the various polymers for optimum efficiency. Starch, Ewedu, and Gum Arabic were used in flooding an already obtained core samples and comparative analysis of this shows that starch yielded the highest recovery due to higher viscosity value as compared to Ewedu with the lowest mobility ratio to Gum Arabic. Finally, the concentration of Starch or Gum Arabic should be increased for optimum recovery.

scholarly journals Study on three phase foam for Enhanced Oil Recovery in extra-low permeability reservoirs

2018 ◽  
Vol 73 ◽  
pp. 55 ◽  
Author(s):  
Ming Zhou ◽  
Juncheng Bu ◽  
Jie Wang ◽  
Xiao Guo ◽  
Jie Huang ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Foam Stability ◽  
Temperature Tolerance ◽  
Resistance Coefficient ◽  
Low Permeability ◽  
Displacement Efficiency ◽  
Three Phase ◽  
Profile Control ◽  
Low Permeability Reservoirs

Poly (MSt-MMA) nanosphere as foam stabilizing agent was synthesized by emulsion polymerization. The three phase foam was prepared with Disodium 4-Dodecyl-2,4′-Oxydiben Zenesulfonate (DOZS) as foaming agent, Hydrolyzed Polyacrylamide (HPAM) and synthesized poly (MSt-MMA) nanospheres as the mixed foam stabilizing agents. It had outstanding foaming performance and foam stability. The optimal three phase foam system consisting of 0.12 wt% HPAM, 0.04 wt% poly (MSt-MMA) nanospheres and 0.12 wt% DOZS by orthogonal experiment, had high apparent viscosity, which showed that three components had a very good synergistic effect. The three phase foam’s temperature tolerance and salt tolerance were researched in laboratory tests. Flooding oil experiment showed that the average displacement efficiency of three phase foam system was 16.1 wt% in single core experiments and 21.7 wt% in double core experiments. Resistance coefficient of low permeability core was more than those of high permeability core, but their residual resistance coefficients were small. The results of core experiment and pilot test indicated that the three phase foam had good profile control ability and generated low damage to the low permeability layer for extra-low permeability reservoirs. Three phase foam flooding has great prospects for Enhanced Oil Recovery (EOR) in extra-low permeability reservoirs.

scholarly journals Enhanced oil recovery ability of branched preformed particle gel in heterogeneous reservoirs

2018 ◽  
Vol 73 ◽  
pp. 65 ◽  
Author(s):  
Long Yu ◽  
Qian Sang ◽  
Mingzhe Dong
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Water Flooding ◽  
Low Permeability ◽  
High Permeability ◽  
Sweep Efficiency ◽  
Reservoir Heterogeneity ◽  
Heterogeneous Reservoirs ◽  
Preformed Particle Gel ◽  
Profile Control

Reservoir heterogeneity is the main cause of high water production and low oil recovery in oilfields. Extreme heterogeneity results in a serious fingering phenomenon of the displacing fluid in high permeability channels. To enhance total oil recovery, the selective plugging of high permeability zones and the resulting improvement of sweep efficiency of the displacing fluids in low permeability areas are important. Recently, a Branched Preformed Particle Gel (B-PPG) was developed to improve reservoir heterogeneity and enhance oil recovery. In this work, conformance control performance and Enhanced Oil Recovery (EOR) ability of B-PPG in heterogeneous reservoirs were systematically investigated, using heterogeneous dual sandpack flooding experiments. The results show that B-PPG can effectively plug the high permeability sandpacks and cause displacing fluid to divert to the low permeability sandpacks. The water injection profile could be significantly improved by B-PPG treatment. B-PPG exhibits good performance in profile control when the high/low permeability ratio of the heterogeneous dual sandpacks is less than 7 and the injected B-PPG slug size is between 0.25 and 1.0 PV. The oil recovery increment enhanced by B-PPG after initial water flooding increases with the increase in temperature, sandpack heterogeneity and injected B-PPG slug size, and it decreases slightly with the increase of simulated formation brine salinity. Choosing an appropriate B-PPG concentration is important for B-PPG treatments in oilfield applications. B-PPG is an efficient flow diversion agent, it can significantly increase sweep efficiency of displacing fluid in low permeability areas, which is beneficial to enhanced oil recovery in heterogeneous reservoirs.

Fuzzy-ball fluid self-selective profile control for enhanced oil recovery in heterogeneous reservoirs: The techniques and the mechanisms

Fuel ◽  
2020 ◽  
Vol 275 ◽  
pp. 117959
Author(s):  
Panfeng Wei ◽  
Lihui Zheng ◽  
Mingzheng Yang ◽  
Chao Wang ◽  
Qifan Chang ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Heterogeneous Reservoirs ◽  
Profile Control

Experiment Study on a Novel Foam System for Enhanced Oil Recovery

2011 ◽  
Vol 311-313 ◽  
pp. 396-405 ◽  
Author(s):  
Zhao Min Li ◽  
Zu Peng Liu
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Control Agent ◽  
Solid Particles ◽  
Mobility Control ◽  
Two Phase ◽  
Orthogonal Experiments ◽  
Profile Control ◽  
Multi Phase ◽  
Micro Sphere

Abstract. Foam, as a mobility control agent in enhanced oil recovery, is becoming more and more attractive. However, this method may be inefficient when water channeling appears in the reservoir due to its heterogeneity. Therefore, it is reasonable to block its flow through preferential channels by an enhanced foam system. A novel foam system is developed by the combination of general two phase foam system with solid particles to improve its performance for deep conformance control in reservoirs. This new foam system involves gas, liquid and particles. Firstly, micro-sphere shape and morphological distribution of particles have been observed through the microscope. Destruction mechanism and stability of multi-phase foam were analyzed in theory. In addition, the concentration of polymer and solid micro-sphere used as the foam agent were determined by orthogonal experiments. Next, micro-sphere displacement experiment shows that it can not only block throats but also migrate through throats by deformation, which can be represented by the pressure curves. Multi-phase foam system presents a similar pressure fluctuation with micro-sphere flooding. Finally, the parallel core experiments were conducted to investigate pressure distribution of two phase foam and multi-phase foam system in porous media respectively. The results show that multi-phase foam can effectively improve the profile control ability and it is adaptable for deep conformance in reservoir.

scholarly journals Mechanism of Enhanced Oil Recovery for In-Depth Profile Control and Cyclic Waterflooding in Fractured Low-Permeability Reservoirs

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Daiyin Yin ◽  
Wei Zhou
Keyword(s):  
Enhanced Oil Recovery ◽  
Depth Profile ◽  
Oil Recovery ◽  
Water Injection ◽  
High Water ◽  
Low Permeability ◽  
Profile Control ◽  
High Water Cut ◽  
Water Cut ◽  
Low Permeability Reservoirs

When fractured low-permeability reservoirs enter a high water cut period, injected water always flows along fractures, water cut speeds increase rapidly, and oil production decreases quickly in oil wells. It is difficult to further improve the oil recovery of such fractured low-permeability reservoirs. In this paper, based on the advantages of in-depth profile control and cyclic water injection, the feasibility of combining deep profile control with cyclic water injection to improve oil recovery in fractured low-permeability reservoirs during the high water cut stage was studied, and the mechanisms of in-depth profile control and cyclic waterflooding were investigated. According to the characteristics of reservoirs in Zone X, as well as the fracture features and evolution mechanisms of the well network, an outcrop plate fractured core model that considers fracture direction was developed, and core displacement experiments were carried out by using the HPAM/Cr3+ gel in-depth profile control system. The enhanced oil recovery of waterflooding, cyclic water injection, and in-depth profile control, as well as a combination of in-depth profile control and cyclic water injection, was investigated. Moreover, variations in the water cut degree, reserve recovery percentage, injection pressure, fracture and matrix pressure, and water saturation were monitored. On this basis, the mechanism of enhanced oil recovery based on the combined utilization of in-depth profile control and cyclic waterflooding methods was analyzed. The results show that in-depth profile control and cyclic water injection can be synchronized to further increase oil recovery. The recovery ratio under the combination of in-depth profile control and cyclic water injection was 1.9% higher than that under the in-depth profile control and 5.6% higher than that under cyclic water injection. The combination of in-depth profile control and cyclic water injection can increase the reservoir pressure; therefore, the fluctuation of pressure between the matrix and its fractures increases, more crude oil flows into the fracture, and the oil production increases.

Sign in / Sign up

Export Citation Format

Share Document