Critical bubble radius for expansion in extrusion cooking

1993 ◽  
Vol 20 (4) ◽  
pp. 325-338 ◽  
Author(s):  
Hitomi Kumagai ◽  
Hitoshi Kumagai ◽  
Toshimasa Yano
1973 ◽  
Vol 24 (5) ◽  
pp. 589-592
Author(s):  
I. M. Fedotkin ◽  
S. M. Konstantinov ◽  
A. A. Tereshchenko

1977 ◽  
Vol 44 (2) ◽  
pp. 279-284 ◽  
Author(s):  
D. R. Topham

The deflection of an infinite ice sheet by a submerged gas source, as would result from an undersea gas or oil well blowout is analysed utilizing an elastic thin plate model. The results show that fracture may occur either at the bubble center or just beyond the bubble edge, depending upon the bubble depth, the ice thickness, and the material properties assumed for the ice sheet. For ice one meter in thickness and a trapped gas depth greater than 100 mm, fracture at the bubble edge is probable. The critical bubble radius for failure varies rapidly with ice thickness, bubble depth, and the ice properties, which in view of the variability of the latter, makes the prediction of actual bubble radii to cause failure subject to a large degree of uncertainty.


Materials ◽  
2004 ◽  
Author(s):  
Ki Young Kim ◽  
Sung Lin Kang ◽  
Ho-Young Kwak

The growing of the critical bubble by diffusion process in visco-elastic medium was treated by an integral method for the concentration boundary layer. In this study, we obtained a set of the first order time dependent equations to obtain bubble radius and gas pressure inside the bubble simultaneously. The calculated final cell sizes depending on the initial saturation pressure are in close agreement with the observed ones. The governing equations developed in this study may be used in polymer processing of microcellular foams.


2007 ◽  
Vol 18 (10) ◽  
pp. 1293-1296 ◽  
Author(s):  
Peng Yu Bi ◽  
Hui Ru Dong ◽  
Nan Nan Wang

2020 ◽  
Vol 16 (4) ◽  
pp. 592-600
Author(s):  
Sajad A. Wani ◽  
Tariq A. Bhat ◽  
Nawaz A. Ganie ◽  
Pradyuman Kumar

Background: The extrusion cooking is the most widely used process so the development and consumption of extruded snack products having health and nutritious benefits would help increase the health status of the population. Objective: The aim of this study was to investigate the effect of storage days on physical, microbial activity and sensory characteristics of extruded snacks and kinetics of extruded snacks. Methods: Extruded snacks were produced by extrusion cooking at optimized conditions of temperature, moisture and screw speed of 110°C, 12% (db) and 200 rpm. The products were packed in lowdensity polyethylene (LDPE) and laminated pouches (LP) and were stored at an accelerated temperature condition of 40 ± 2°C. The storage stability in terms of quality parameters such as moisture, hardness, bulk density, color, lateral expansion, sensory characteristics and total plate count was investigated. Results: An increase (p≤0.05) in the value of moisture, bulk density, a*, and total plate count was observed during the storage period, whereas hardness, L*, b*, ΔE and sensory characteristics showed significant (p≤0.05) decreased order with storage period. No significant effect on the lateral expansion of the extruded product was observed. A significant decrease in total carbohydrate, fat and protein content was found during the storage period. The average sensory score and microbial analysis suggested that extruded snacks packed in LDPE pouches can only be acceptable up to the 60th day and extruded snacks packed in LP can be acceptable to more than 90th day. The kinetics of color and hardness suggest first order kinetics. Conclusion: Overall investigation suggested that extruded snacks were more stable in the LP as compared to LDPE pouches.


2020 ◽  
Vol 2020 (1) ◽  
Author(s):  
Carlos Lizama ◽  
Marina Murillo-Arcila

Abstract We consider the maximal regularity problem for a PDE of linear acoustics, named the Van Wijngaarden–Eringen equation, that models the propagation of linear acoustic waves in isothermal bubbly liquids, wherein the bubbles are of uniform radius. If the dimensionless bubble radius is greater than one, we prove that the inhomogeneous version of the Van Wijngaarden–Eringen equation, in a cylindrical domain, admits maximal regularity in Lebesgue spaces. Our methods are based on the theory of operator-valued Fourier multipliers.


Author(s):  
Loïc Desbordes ◽  
Agnès Grandjean ◽  
Fabien Frances ◽  
Hélène Lorcet ◽  
Sylvain Faure

2012 ◽  
Vol 131 (4) ◽  
pp. 1406-1413 ◽  
Author(s):  
Paras Sharma ◽  
Hardeep Singh Gujral ◽  
Baljeet Singh

Sign in / Sign up

Export Citation Format

Share Document