Screening of Yeast in Various Vineyard Soil and Study on Its Flavor Compounds from Brewing Grape Wine

In order to screen out Saccharomyces cerevisiae suitable for table grape fermentation, and compare it with commercial Saccharomyces cerevisiae in terms of fermentation performance and aroma producing substances, differences of fermentation flavor caused by different strains were discussed. In this experiment, yeast was isolated and purified from vineyard soil, 26s rDNA identification and fermentation substrate tolerance analysis were carried out, and the causes of flavor differences of wine were analyzed from three aspects: GC-MS, PCA and sensory evaluation. The results showed that strain S1 had the highest floral aroma fraction, corresponding to its high production of ethyl octanoate and other substances, and it had the characteristics of high sugar tolerance. The fruit sensory score of S3 wine was the highest among the six wines. Through exploration and analysis, it was found that compared with commercial Saccharomyces cerevisiae, the screened strains had more advantages in fermenting table grapes. The flavor of each wine was directly related to the growth characteristics and tolerance of its strains.

Preparation of Curcumin Hydrogel Beads for the Development of Functional Kulfi, a Tailoring Delivery System

Curcumin has been demonstrated to have biological activities and its fortification in food products is an important strategy to deliver bioactive ingredients at target sites. However, studies have documented a curcumin low bioavailability and low intake. Hence, combining functional ingredients with food should be needed to prevent widespread nutrient intake shortfalls and associated deficiencies. Thus, curcumin was encapsulated in calcium-alginate and their characteristics as well as in vitro release behavior of curcumin hydrogel beads (CHBs) was studied. Moreover, CHBs were fortified in development of functional Kulfi and their quality characteristics were studied. The encapsulation efficiency was up to 95.04%, indicating that most of the curcumin was entrapped. FTIR shifts in the bands were due to the replacement of sodium ions to the calcium ions. In vitro release (%) for CHBs was found to be 67.15% after 2 h, which increased slightly up to 67.88% after 4 h. The average swelling index of CHBs was found to be 10.21 to 37.92 from 2 to 12 h in PBS (pH 7.40). Control and Kulfi fortified with CHBs showed no significant difference (p > 0.05) in colour (L = 73.03 and 75.88) and the melting rate (0.88 mL/min and 0.63 mL/min), respectively. Standard plate count was reduced in the Kulfi fortified with CHBs (13.77 × 104 CFU/mL) with high sensory score for overall acceptability (8.56) compared to the control (154.70 × 104 CFU/mL). These findings suggested the feasibility of developing CHBs to mask the bitterness, enhance the solubility, and increase the bioavailability in gastrointestinal conditions. Additionally, Kulfi could be a suitable dairy delivery system for curcumin bioactive compounds.

Effect of Osmo Dehydration on Quality Attributes of Bilimbi (Averroha bilimbi) Fruits

Background: Bilimbi is a profusely bearing tree and majority of fruits produced are wasted due to lack of proper preservation methods. Osmo-dehydration studies on quality attributes of bilimbi (Averroha bilimbi) was conducted with the objective to standardize the process variables for osmodehydrated bilimbi and to assess the retention of bioactive compounds. Methods: Harvested mature bilimbi fruits of uniform size were washed, surface dried, pricked and blanched in hot water for one minute. Blanched fruits were subjected to osmotic treatment, with sucrose solution of 40, 60 and 80°B for 60, 120 and 180 minutes. The osmodehydrated bilimbi fruits were analyzed for mass transfer, biochemical and sensory qualities. Best treatments were stored for four months in the room temperature. Result: Mass transfer characters viz., solid gain, water loss, percentage weight reduction, yield and biochemical parameters such as reducing sugar and total sugar increased with increase in osmotic concentration and immersion time whereas free acids, ascorbic acid and antioxidant activity were decreased. The osmotic treatment of 80°B for 180 minutes recorded the highest value for solid gain (5.10%), water loss (16.72%), weight reduction (22.57%), ratio of water loss to solid gain (3.25%) and yield (21.13%) which exhibited superior sensory scores for taste (8.43), flavor (8.27), texture (8.46) and overall acceptability (8.43). The best three treatments selected based on sensory analysis were subjected to storage stability studies under room temperature. Osmodehydrated bilimbi obtained highest sensory score at the end of storage.

Chemical and sensory characteristics in the selection of bourbon genotypes

The evaluation of coffee quality in Brazil for commercialization is conducted mainly through sensory analysis, also known as the "cup test", in which professional tasters evaluate and score various attributes. The adoption of chemical methods could complement the sensory classification of beverages, if correlations between these chemical and sensory analyses exist, making classification less subjective. This work aimed to identify the relationships between the chemical and sensorial traits of coffee-beverage quality and to evaluate the use of these traits as criteria for the selection of Bourbon cultivars. Twenty coffee genotypes from the first three harvests across five municipalities of the state of Minas Gerais, Brazil were evaluated. The genotypic values, predicted for each genotype, were used to determine the index based on the sum of ranks from Mulamba and Mock. The genetic correlations among the evaluated traits were also estimated. The presented evaluations were not able to efficiently detect genetic and phenotypic relationships between the chemical and sensorial characteristics of drink quality, but as selection criteria for generation advancement in the beverage quality, it is possible to use these characteristics. Bourbon Amarelo LCJ 9-IAC, Bourbon Amarelo-Procafé, Bourbon Amarelo-Boa Vista, Bourbon Vermelho-São João Batista, and Bourbon Amarelo-Samambaia were the genotypes with the most promising cup quality in the studied regions. Through the selection of these five genotypes, the selection gain was 1.65% for sensory score for beverage quality, when the interaction among the studied environments was removed. The heritability was 92% for improving this trait.

Effect of Specific Acupuncture Therapy Combined with Rehabilitation Training on Incomplete Spinal Cord Injury: A Randomized Clinical Trial

Acupuncture therapies were used to treat spinal cord injury (SCI) and its complications. To assess the effect of a specific acupuncture therapy combined with rehabilitation training for inpatients with incomplete SCI, we conducted an assessor-blinded, randomized controlled clinical trial in the Department of Rehabilitation Medicine Center in West China Hospital, Sichuan University. Seventy-two participants diagnosed with incomplete SCI were randomly assigned into 3 groups of 24 patients each, with data collection completed in December, 2019. Participants were randomly assigned (1 : 1 : 1) to 3 groups to receive treatment for 4 weeks, 5 times/week of acupuncture for Continuous Acupuncture Treatment (CAT) group, 3 times/week for Intermittent Acupuncture Treatment (IAT) group, and no acupuncture for Control group; all 3 groups received routine rehabilitation training. The primary outcome was the change of American Spinal Injury Association (ASIA) motor score from baseline to week 4. Secondary outcomes included sensory score, Modified Barthel Index (MBI). At week 4, CAT group had a higher motor score and MBI score increase than the control group (mean difference 10.52, 17.36; p < 0.001, p < 0.01, respectively). CAT group had more increase in motor score and MBI than IAT group (mean difference 5.55, 14.77; p < 0.05, p < 0.05, respectively). But the difference among groups in the increase of sensory score was not statistically significant. Acupuncture resulted in a higher motor score and MBI after 4 weeks. And the dosage of 5/week led to more improvement in motor score and MBI than that of 3/week. The results suggested that a dosage of 5/week of acupuncture is safe and more effective for SCI than 3/week. But further research is needed to determine the best intervention dosage, long-term efficacy, and underlying mechanism. This trial is registered with ChiCTR1900021530.

Qualitative Evaluation of Fish Fingers Prepared from Tilapia (Oreochromis niloticus) and Pangasius (Pangasius pangasius) Stored at -18±2°C

Background: The fish being highly perishable food item consumed in all strata of people. The production of freshwater fish is on the rise and need to be processed in a variety of forms to make them available for people. Nowadays, numbers of value added fish products are available in the market for consumption to achieve health beneficial effect and to cope up with malnutrition. However, consumers are unaware of the quality of the products available in the market. Therefore, the present work was undertaken to evaluate the quality of fish fingers produced from tilapia and pangasius during storage at -18±2°C. Methods: The fresh tilapia and pangasius were purchased from local market to prepare fillets. The fingers were prepared from tilapia and pangasius fillets and par fried at 180°C for 30 seconds. The fried fingers were cooled at once at room temperature and stored in deep freeze at -18±2°C for shelf-life study during November 2019 to March 2021. Result: The results indicated that the fish fingers prepared from tilapia could be stored for 33 days and pangasius fingers had a shelf-life of only 27 days. All biochemical parameters viz. pH, TVB-N, PV, FFA and TBA were found increasing as the storage study progresses. The sensory score of the fish fingers produced from both the fishes were got drastically reduced at the end of deep freeze storage at -18±2°C. Overall study indicated that tilapia and pangasius fish can be successfully utilized for the preparation of various value added fish product such as fish fingers and would have sufficient shelf life at deep freeze storage at -18±2°C.

Effect of inulin and oat flour on viability of probiotics and physicochemical properties of reduced fat synbiotic ice cream

PurposeThe purpose of this study is to investigate the viability of probiotics, physicochemical and sensory properties of reduced fat synbiotic ice cream.Design/methodology/approachThe treatments were as follows: control was made by the addition of Lactobacillus salivarius NBIMCC 1589 and Lactobacillus crispatus NBIMCC 2451 (1:1). The treatments (T1, T2 and T3) were made with the addition of L. salivarius NBIMCC 1589 and L. crispatus NBIMCC 2451 (1:1) + 2% oat flour, 2% inulin and 4% oat flour + inulin (1:1). Physiochemical parameters (pH, moisture, fat, protein, fibre, ash, overrun, first dripping time and melting rate) were determined.FindingsThe ice cream with inulin and oat flour had lower moisture content, which was recorded 70.41, 69.88 and 68.82% for T1, T2 and T3, respectively. While the protein, fat and ash content of treated samples increased. The highest acidity (0.43%) was recorded in T3. The overrun increased by around 43% in T3 compared with control. The viable counts of probiotics were significantly (p = 0.05) decreased by two or three log cycles. Finally, T3 received the highest sensory score, which could be due to the combination between oat flour and inulin.Originality/valueA novel ice cream was produced using a combination of inulin and oat flour, which enhanced the viability of added probiotics. Reduced fat synbiotic ice cream was a good carrier for probiotics, which facilitates the production of healthy dairy products.

Effect of Zn-Rich Wheat Bran With Different Particle Sizes on the Quality of Steamed Bread

Bran is the main by-product of wheat milling and the part of the grain with the highest Zn content. We investigated the effects of the particle sizes (coarse, D50 = 375.4 ± 12.3 μm; medium, D50 = 122.3 ± 7.1 μm; and fine, D50 = 60.5 ± 4.2 μm) and addition level (5–20%) of Zn-biofortified bran on the quality of flour and Chinese steamed bread. It was studied to determine if the Zn content of steamed bread could be enhanced without deleterious effects on quality. Dough pasting properties, such as peak viscosity, trough viscosity, final viscosity, breakdown, and setback, decreased significantly as the bran addition level was increased from 5 to 20% but did not significantly differ as a result of different bran particle sizes. Bran incorporation significantly increased hardness, gumminess, chewiness, and adhesiveness, whereas the springiness, cohesiveness, and specific volume of steamed bread decreased with the increase in bran addition. The optimal sensory score of steamed bread samples in the control and Zn fertilizer groups were obtained under 5% bran addition resulting in comparable flavor, and texture relative to control. Meanwhile, the Zn content of the steamed bread in the Zn fertilizer group was 40.2 mg/kg, which was 55.8% higher than that in the control group. Results indicated that adding the appropriate particle size and amount of bran would be an effective and practical way to solve the problem of the insufficient Zn content of steamed bread.

Microfluidization-Driven Changes in Some Physicochemical Characteristics, Metal/Mineral Composition, and Sensory Attributes of Sugarcane Juice

This work evaluated the effect of microfluidization at different pressure (50, 100, 150, and 200 MPa)-cycle (1, 3, 5, 7) combinations on the physicochemical (total soluble solids, titratable acidity, pH, and electrical conductivity), sensory, and metal/mineral composition of sugarcane juice which was previously unexplored. Juice extracted from blanched sugarcane stems (var Co 0238) was microfluidized, and the analysis for different parameters was conducted using standard protocols. The mineral/metal composition was determined using ICP-OES following a wet digestion method. Results showed that TSS decreased from 18.88 °Brix to a range of 10.15–15.7 °Brix with the former (lower value) being due to the release of insoluble matter after microfluidization which was further solubilised at higher processing cycles (as in the latter). The pH did not vary significantly as compared to control and was in the range of 5.2–5.7. However, a decrease in titratable acidity (0.1–0.26%) was found as compared to control (0.26%). The electrical conductivity of microfluidized sugarcane juice varied from 4.45 to 5.12 mS as compared to 4.95 mS for control. Metal/mineral analysis showed rich reserves of magnesium, phosphorus, potassium, and calcium in sugarcane juice which degraded after microfluidization perhaps due to filtration effect caused by the micropore in the interaction chamber of the microfluidizer. The sensory score showed acceptability of the juice after microfluidization (overall acceptability ∼7).

Kinetics of Oil Absorption and Moisture Loss during Deep-Frying of Pork Skin with Different Thickness

We have investigated different properties (thickness, moisture loss, oil uptake, breaking force, color, puffing ratio during 0.5–5 min frying, microstructure, and sensory evaluation) of raw pork skins with varying thickness (2, 3, and 4 mm) after drying, intended as deep-fried snacks. We have found that the oil content, breaking force, and puffing ratio of fried pork skin with different raw skin thickness have no significant difference under similar water content (1.68–1.98 g/100 g wet weight basis, wb) after 3–5 min of deep-frying at 180 °C. Additionally, sensory score results have shown that fried pork skins with 4 mm raw skin thickness had lower flavor, texture, and overall acceptability than those with 2 mm and 3 mm raw skin thickness. Scanning electron micrographs (SEM) have revealed less holes and irregular and crack microstructure in fried pork skins with 4 mm raw skin thickness than in other groups. Different thickness of raw pork skins resulted in different effects in microstructure and influenced water evaporation and oil uptake of fried pork skin. Finally, we have proposed the kinetic equations of water loss and oil uptake of fried pork skins. Fried pork skin from raw skin thicker than 4 mm need frying at temperature higher than 180 °C to improve their puffing ratio and sensory acceptability.