scholarly journals Controlled release of soy isoflavones from multifunctional 3D printed bone tissue engineering scaffolds

2020 ◽  
Vol 114 ◽  
pp. 407-420 ◽  
Author(s):  
Naboneeta Sarkar ◽  
Susmita Bose
Keyword(s):  
Tissue Engineering ◽  
Controlled Release ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Soy Isoflavones ◽  
Tissue Engineering Scaffolds ◽  
3D Printed

scholarly journals 3D-printed β-TCP bone tissue engineering scaffolds: Effects of chemistry on in vivo biological properties in a rabbit tibia model

2018 ◽  
Vol 33 (14) ◽  
pp. 1939-1947 ◽  
Author(s):  
Samit Kumar Nandi ◽  
Gary Fielding ◽  
Dishary Banerjee ◽  
Amit Bandyopadhyay ◽  
Susmita Bose
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Biological Properties ◽  
Tissue Engineering Scaffolds ◽  
Rabbit Tibia ◽  
3D Printed ◽  
Image Position

Abstract

HYDROXYAPATITE, ALGINATE, AND CHITOSAN FOR BONE SCAFFOLDS: SPECTROSCOPY STUDY

2016 ◽  
Vol 19 (2) ◽  
pp. 93-100
Author(s):  
Lalita El Milla
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Functional Groups ◽  
Bone Growth ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Tissue Engineering Scaffolds ◽  
Hydroxyapatite Powder ◽  
Materials Used

Scaffolds is three dimensional structure that serves as a framework for bone growth. Natural materials are often used in synthesis of bone tissue engineering scaffolds with respect to compliance with the content of the human body. Among the materials used to make scafffold was hydroxyapatite, alginate and chitosan. Hydroxyapatite powder obtained by mixing phosphoric acid and calcium hydroxide, alginate powders extracted from brown algae and chitosan powder acetylated from crab. The purpose of this study was to examine the functional groups of hydroxyapatite, alginate and chitosan. The method used in this study was laboratory experimental using Fourier Transform Infrared (FTIR) spectroscopy for hydroxyapatite, alginate and chitosan powders. The results indicated the presence of functional groups PO43-, O-H and CO32- in hydroxyapatite. In alginate there were O-H, C=O, COOH and C-O-C functional groups, whereas in chitosan there were O-H, N-H, C=O, C-N, and C-O-C. It was concluded that the third material containing functional groups as found in humans that correspond to the scaffolds material in bone tissue engineering.

scholarly journals Three-dimensionally printed polycaprolactone/multicomponent bioactive glass scaffolds for potential application in bone tissue engineering

2020 ◽  
Vol 6 (1) ◽  
pp. 57-69
Author(s):  
Amirhosein Fathi ◽  
Farzad Kermani ◽  
Aliasghar Behnamghader ◽  
Sara Banijamali ◽  
Masoud Mozafari ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Composite Scaffolds ◽  
3D Printed ◽  
Co Doped

AbstractOver the last years, three-dimensional (3D) printing has been successfully applied to produce suitable substitutes for treating bone defects. In this work, 3D printed composite scaffolds of polycaprolactone (PCL) and strontium (Sr)- and cobalt (Co)-doped multi-component melt-derived bioactive glasses (BGs) were prepared for bone tissue engineering strategies. For this purpose, 30% of as-prepared BG particles (size <38 μm) were incorporated into PCL, and then the obtained composite mix was introduced into a 3D printing machine to fabricate layer-by-layer porous structures with the size of 12 × 12 × 2 mm3.The scaffolds were fully characterized through a series of physico-chemical and biological assays. Adding the BGs to PCL led to an improvement in the compressive strength of the fabricated scaffolds and increased their hydrophilicity. Furthermore, the PCL/BG scaffolds showed apatite-forming ability (i.e., bioactivity behavior) after being immersed in simulated body fluid (SBF). The in vitro cellular examinations revealed the cytocompatibility of the scaffolds and confirmed them as suitable substrates for the adhesion and proliferation of MG-63 osteosarcoma cells. In conclusion, 3D printed composite scaffolds made of PCL and Sr- and Co-doped BGs might be potentially-beneficial bone replacements, and the achieved results motivate further research on these materials.

scholarly journals THREE-DIMENSIONAL NANOCOMPOSITE SCAFFOLDS FOR BONE TISSUE ENGINEERING: FROM DESIGN TO APPLICATION

Nano LIFE ◽  
2012 ◽  
Vol 02 (01) ◽  
pp. 1250005 ◽  
Author(s):  
BIN DUAN ◽  
MIN WANG ◽  
WILLIAM W. LU
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Rabbit Model ◽  
Bone Morphogenetic Protein 2 ◽  
Human Umbilical Cord ◽  
Porous Structures ◽  
Tissue Engineering Scaffolds ◽  
Surface Modified ◽  
Nanocomposite Scaffolds

Selective laser sintering (SLS), a rapid prototyping technology, was investigated for producing bone tissue engineering scaffolds. Completely biodegradable osteoconductive calcium phosphate (Ca-P)/poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) scaffolds were successfully fabricated via SLS using Ca-P/PHBV nanocomposite microspheres. In the SLS manufacturing route, the architecture of tissue engineering scaffolds (pore shape, size, interconnectivity, etc.) can be designed and the sintering process can be optimized for obtaining scaffolds with desirable porous structures and mechanical properties. SLS was also shown to be very effective in producing highly complex porous structures using nanocomposite microspheres. To render SLS-formed Ca-P/PHBV scaffolds osteoinductive, recombinant human bone morphogenetic protein-2 (rhBMP-2) could be loaded onto the scaffolds. For achieving a controlled release of rhBMP-2 from scaffolds, surface modification of Ca-P/PHBV scaffolds by gelatin entrapment and heparin immobilization was needed. The immobilized heparin provided binding affinity for rhBMP-2. Surface modified Ca-P/PHBV nanocomposite scaffolds loaded with rhBMP-2 enhanced the proliferation of human umbilical cord derived mesenchymal stem cells (hUCMSCs) and also their alkaline phosphatase activity. In in vivo experiments using a rabbit model, surface modified Ca-P/PHBV nanocomposite scaffolds loaded with rhBMP-2 promoted ectopic bone formation, exhibiting their osteoinductivity. The strategy of combining advanced scaffold fabrication, nanocomposite material, and controlled growth factor delivery is promising for bone tissue regeneration.

Sign in / Sign up

Export Citation Format

Share Document