scholarly journals VOLCO-X: numerical simulation of material distribution and voids in extrusion additive manufacturing

2021 ◽  
pp. 101900
Author(s):  
Rafael Quelho de Macedo ◽  
Rafael Thiago Luiz Ferreira ◽  
Andrew Gleadall ◽  
Ian Ashcroft
Keyword(s):  
Numerical Simulation ◽  
Additive Manufacturing ◽  
Material Distribution

scholarly journals A Shape Optimization Method for Part Design Derived from the Buildability Restrictions of the Directed Energy Deposition Additive Manufacturing Process

Designs ◽  
2020 ◽  
Vol 4 (3) ◽  
pp. 19
Author(s):  
Andreas K. Lianos ◽  
Harry Bikas ◽  
Panagiotis Stavropoulos
Keyword(s):  
Topology Optimization ◽  
Additive Manufacturing ◽  
Energy Deposition ◽  
Design Method ◽  
Current Trend ◽  
Internal Stresses ◽  
Material Distribution ◽  
Load Case ◽  
Design Elements ◽  
Industrial Sectors

The design methodologies and part shape algorithms for additive manufacturing (AM) are rapidly growing fields, proven to be of critical importance for the uptake of additive manufacturing of parts with enhanced performance in all major industrial sectors. The current trend for part design is a computationally driven approach where the parts are algorithmically morphed to meet the functional requirements with optimized performance in terms of material distribution. However, the manufacturability restrictions of AM processes are not considered at the primary design phases but at a later post-morphed stage of the part’s design. This paper proposes an AM design method to ensure: (1) optimized material distribution based on the load case and (2) the part’s manufacturability. The buildability restrictions from the direct energy deposition (DED) AM technology were used as input to the AM shaping algorithm to grant high AM manufacturability. The first step of this work was to define the term of AM manufacturability, its effect on AM production, and to propose a framework to estimate the quantified value of AM manufacturability for the given part design. Moreover, an AM design method is proposed, based on the developed internal stresses of the build volume for the load case. Stress tensors are used for the determination of the build orientation and as input for the part morphing. A top-down mesoscale geometric optimization is used to realize the AM part design. The DED Design for Additive Manufacturing (DfAM) rules are used to delimitate the morphing of the part, representing at the same time the freeform mindset of the AM technology. The morphed shape of the part is optimized in terms of topology and AM manufacturability. The topology optimization and AM manufacturability indicator (TMI) is introduced to screen the percentage of design elements that serve topology optimization and the ones that serve AM manufacturability. In the end, a case study for proof of concept is realized.

scholarly journals Application of an Additive Manufactured Hybrid Metal/Composite Shock Absorber Panel to a Military Seat Ejection System

2021 ◽  
Vol 11 (14) ◽  
pp. 6473
Author(s):  
Valerio Acanfora ◽  
Chiara Corvino ◽  
Salvatore Saputo ◽  
Andrea Sellitto ◽  
Aniello Riccio
Keyword(s):  
Numerical Simulation ◽  
Additive Manufacturing ◽  
Total Mass ◽  
Shock Absorber ◽  
Metal Composite ◽  
Plastic Deformations ◽  
Shock Absorbers ◽  
Numerical Assessment ◽  
Lattice Core ◽  
Ejection Phase

In this work, a preliminary numerical assessment on the application of an additive manufactured hybrid metal/composite shock absorber panels to a military seat ejection system, has been carried out. The innovative character of the shock absorber concept investigated is that the absorbing system has a thickness of only 6 mm and is composed of a pyramid-shaped lattice core that, due to its small size, can only be achieved by additive manufacturing. The mechanical behaviour of these shock absorber panels has been examined by measuring their ability to absorb and dissipate the energy generated during the ejection phase into plastic deformations, thus reducing the loads acting on pilots. In this paper the effectiveness of a system composed of five hybrid shock absorbers, with very thin thickness in order to be easily integrated between the seat and the aircraft floor, has been numerically studied by assessing their ability to absorb the energy generated during the primary ejection phase. To accomplish this, a numerical simulation of the explosion has been performed and the energy absorbed by the shock-absorbing mechanism has been assessed. The performed analysis demonstrated that the panels can absorb more than 60% of the energy generated during the explosion event while increasing the total mass of the pilot-seat system by just 0.8%.

Approximate Functionally Graded Materials for Multi-Material Additive Manufacturing

2018 ◽  
Author(s):  
Yuen-Shan Leung ◽  
Huachao Mao ◽  
Yong Chen
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Functionally Graded Materials ◽  
Functionally Graded ◽  
Gradual Transition ◽  
Material Distribution ◽  
Graded Materials ◽  
Base Materials ◽  
Multiple Materials ◽  
Am Processes

Functionally graded materials (FGM) possess superior properties of multiple materials due to the continuous transitions of these materials. Recent progresses in multi-material additive manufacturing (AM) processes enable the creation of arbitrary material composition, which significantly enlarges the manufacturing capability of FGMs. At the same time, the fabrication capability also introduces new challenges for the design of FGMs. A critical issue is to create the continuous material distribution under the fabrication constraints of multi-material AM processes. Using voxels to approximate gradient material distribution could be one plausible way for additive manufacturing. However, current FGM design methods are non-additive-manufacturing-oriented and unpredictable. For instance, some designs require a vast number of materials to achieve continuous transitions; however, the material choices that are available in a multi-material AM machine are rather limited. Other designs control the volume fraction of two materials to achieve gradual transition; however, such transition cannot be functionally guaranteed. To address these issues, we present a design and fabrication framework for FGMs that can efficiently and effectively generate printable and predictable FGM structures. We adopt a data-driven approach to approximate the behavior of FGM using two base materials. A digital material library is constructed with different combinations of the base materials, and their mechanical properties are extracted by Finite Element Analysis (FEA). The mechanical properties are then used for the conversion process between the FGM and the dual material structure such that similar behavior is guaranteed. An error diffusion algorithm is further developed to minimize the approximation error. Simulation results on four test cases show that our approach is robust and accurate, and the framework can successfully design and fabricate such FGM structures.

scholarly journals Numerical simulation on metallic additive manufacturing

2020 ◽  
Vol 50 (9) ◽  
pp. 090007
Author(s):  
FeiYu XIONG ◽  
JiaWei CHEN ◽  
ChenYang HUANG ◽  
YanPing LIAN
Keyword(s):  
Numerical Simulation ◽  
Additive Manufacturing ◽  
Metallic Additive

Numerical simulation of the influence of the idle time on residual stress of walls deposited by wire + arc additive manufacturing

2020 ◽  
Vol 20 (2020) ◽  
pp. 412-413
Author(s):  
Francisco Werley Cipriano Farias ◽  
Augusto Veríssimo Passos ◽  
Victor Hugo Pereira Moraes E Oliveira ◽  
João da Cruz Payão Filho ◽  
Diego Russo Juliano ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Residual Stress ◽  
Additive Manufacturing ◽  
Idle Time ◽  
Wire Arc Additive Manufacturing

scholarly journals An Overview of Additive Manufacturing Technologies—A Review to Technical Synthesis in Numerical Study of Selective Laser Melting

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3895 ◽  
Author(s):  
Abbas Razavykia ◽  
Eugenio Brusa ◽  
Cristiana Delprete ◽  
Reza Yavari
Keyword(s):  
Numerical Simulation ◽  
Additive Manufacturing ◽  
Selective Laser Melting ◽  
Powder Bed Fusion ◽  
Laser Melting ◽  
Powder Bed ◽  
Part Quality ◽  
Melt Pool ◽  
Wide Range ◽  
Am Processes

Additive Manufacturing (AM) processes enable their deployment in broad applications from aerospace to art, design, and architecture. Part quality and performance are the main concerns during AM processes execution that the achievement of adequate characteristics can be guaranteed, considering a wide range of influencing factors, such as process parameters, material, environment, measurement, and operators training. Investigating the effects of not only the influential AM processes variables but also their interactions and coupled impacts are essential to process optimization which requires huge efforts to be made. Therefore, numerical simulation can be an effective tool that facilities the evaluation of the AM processes principles. Selective Laser Melting (SLM) is a widespread Powder Bed Fusion (PBF) AM process that due to its superior advantages, such as capability to print complex and highly customized components, which leads to an increasing attention paid by industries and academia. Temperature distribution and melt pool dynamics have paramount importance to be well simulated and correlated by part quality in terms of surface finish, induced residual stress and microstructure evolution during SLM. Summarizing numerical simulations of SLM in this survey is pointed out as one important research perspective as well as exploring the contribution of adopted approaches and practices. This review survey has been organized to give an overview of AM processes such as extrusion, photopolymerization, material jetting, laminated object manufacturing, and powder bed fusion. And in particular is targeted to discuss the conducted numerical simulation of SLM to illustrate a uniform picture of existing nonproprietary approaches to predict the heat transfer, melt pool behavior, microstructure and residual stresses analysis.

Investigation of Parameter Spaces for Topology Optimization With Three-Dimensional Orientation Fields for Multi-Axis Additive Manufacturing

2020 ◽  
Vol 143 (5) ◽  
Author(s):  
Joseph R. Kubalak ◽  
Alfred L. Wicks ◽  
Christopher B. Williams
Keyword(s):  
Topology Optimization ◽  
Additive Manufacturing ◽  
Design Space ◽  
Mechanical Performance ◽  
Unit Length ◽  
Three Dimensions ◽  
Layer By Layer ◽  
Material Distribution ◽  
Orientation Fields ◽  
Material Orientation

Abstract The layer-by-layer deposition process used in material extrusion (ME) additive manufacturing results in inter- and intra-layer bonds that reduce the mechanical performance of printed parts. Multi-axis (MA) ME techniques have shown potential for mitigating this issue by enabling tailored deposition directions based on loading conditions in three dimensions (3D). Planning deposition paths leveraging this capability remains a challenge, as an intelligent method for assigning these directions does not exist. Existing literature has introduced topology optimization (TO) methods that assign material orientations to discrete regions of a part by simultaneously optimizing material distribution and orientation. These methods are insufficient for MA–ME, as the process offers additional freedom in varying material orientation that is not accounted for in the orientation parameterizations used in those methods. Additionally, optimizing orientation design spaces is challenging due to their non-convexity, and this issue is amplified with increased flexibility; the chosen orientation parameterization heavily impacts the algorithm’s performance. Therefore, the authors (i) present a TO method to simultaneously optimize material distribution and orientation with considerations for 3D material orientation variation and (ii) establish a suitable parameterization of the orientation design space. Three parameterizations are explored in this work: Euler angles, explicit quaternions, and natural quaternions. The parameterizations are compared using two benchmark minimum compliance problems, a 2.5D Messerschmitt–Bölkow–Blohm beam and a 3D Wheel, and a multi-loaded structure undergoing (i) pure tension and (ii) three-point bending. For the Wheel, the presented algorithm demonstrated a 38% improvement in compliance over an algorithm that only allowed planar orientation variation. Additionally, natural quaternions maintain the well-shaped design space of explicit quaternions without the need for unit length constraints, which lowers computational costs. Finally, the authors present a path toward integrating optimized geometries and material orientation fields resulting from the presented algorithm with MA–ME processes.

Temperature distribution simulations during electron beam freeform fabrication process based on the fully threaded tree

2019 ◽  
Vol 25 (6) ◽  
pp. 989-997
Author(s):  
Yajun Yin ◽  
Wei Duan ◽  
Kai Wu ◽  
Yangdong Li ◽  
Jianxin Zhou ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Temperature Field ◽  
Electron Beam ◽  
Additive Manufacturing ◽  
Temperature Distribution ◽  
Design Methodology ◽  
Content Type ◽  
Freeform Fabrication ◽  
Simulation Based ◽  
Simulation Results

Purpose The purpose of this study is to simulate the temperature distribution during an electron beam freeform fabrication (EBF3) process based on a fully threaded tree (FTT) technique in various scales and to analyze the temperature variation with time in different regions of the part. Design/methodology/approach This study presented a revised model for the temperature simulation in the EBF3 process. The FTT technique was then adopted as an adaptive grid strategy in the simulation. Based on the simulation results, an analysis regarding the temperature distribution of a circular deposit and substrate was performed. Findings The FTT technique was successfully adopted in the simulation of the temperature field during the EBF3 process. The temperature bands and oscillating temperature curves appeared in the deposit and substrate. Originality/value The FTT technique was introduced into the numerical simulation of an additive manufacturing process. The efficiency of the process was improved, and the FTT technique was convenient for the 3D simulations and multi-pass deposits.

Sign in / Sign up

Export Citation Format

Share Document