Small scale spatial variability of snow density and depth over complex alpine terrain: Implications for estimating snow water equivalent

AbstractSnow accumulation and melt are highly variable. Therefore, correct modeling of spatial variability of the snowmelt, timing and magnitude of catchment runoff still represents a challenge in mountain catchments for flood forecasting. The article presents the setup and results of detailed field measurements of snow related characteristics in a mountain microcatchment (area 59 000 m2, mean altitude 1509 m a. s. l.) in the Western Tatra Mountains, Slovakia obtained in winter 2015. Snow water equivalent (SWE) measurements at 27 points documented a very large spatial variability through the entire winter. For instance, range of the SWE values exceeded 500 mm at the end of the accumulation period (March 2015). Simple snow lysimeters indicated that variability of snowmelt and discharge measured at the catchment outlet corresponded well with the rise of air temperature above 0°C. Temperature measurements at soil surface were used to identify the snow cover duration at particular points. Snow melt duration was related to spatial distribution of snow cover and spatial patterns of snow radiation. Obtained data together with standard climatic data (precipitation and air temperature) were used to calibrate and validate the spatially distributed hydrological model MIKE-SHE. The spatial redistribution of input precipitation seems to be important for modeling even on such a small scale. Acceptable simulation of snow water equivalents and snow duration does not guarantee correct simulation of peakflow at short-time (hourly) scale required for example in flood forecasting. Temporal variability of the stream discharge during the snowmelt period was simulated correctly, but the simulated discharge was overestimated.

Download Full-text

What drives basin scale spatial variability of snow water equivalent during two extreme years?

The Cryosphere Discussions ◽

10.5194/tcd-7-2943-2013 ◽

2013 ◽

Vol 7 (3) ◽

pp. 2943-2977

Author(s):

G. A. Sexstone ◽

S. R. Fassnacht

Keyword(s):

Linear Regression ◽

Spatial Variability ◽

Multiple Linear Regression ◽

Snow Depth ◽

Snow Water Equivalent ◽

Density Model ◽

Snow Density ◽

Depth Measurement ◽

Basin Scale ◽

Snow Water

Abstract. This study uses a combination of field measurements and Natural Resource Conservation Service (NRCS) operational snow data to understand the drivers of snow water equivalent (SWE) spatial variability at the basin scale. Historic snow course snowpack density observations were analyzed within a multiple linear regression snow density model to estimate SWE directly from snow depth measurements. Snow surveys were completed on or about 1 April 2011 and 2012 and combined with NRCS operational measurements to investigate the spatial variability of SWE. Bivariate relations and multiple linear regression models were developed to understand the relation of SWE with terrain and canopy variables (derived using a geographic information system (GIS)). Calculation of SWE directly from snow depth measurement using the snow density model has strong statistical performance and model validation suggests the model is transferable to independent data within the bounds of the original dataset. This pathway of estimating SWE directly from snow depth measurement is useful when evaluating snowpack properties at the basin scale, where many time consuming measurements of SWE are often not feasible. During both water year (WY) 2011 and 2012, elevation and location (UTM Easting and UTM Northing) were the most important model variables, suggesting that orographic precipitation and storm track patterns are likely consistent drivers of basin scale SWE variability. Terrain characteristics, such as slope, aspect, and curvature, were also shown to be important variables, but to a lesser extent at the scale of interest.

Download Full-text

Spatial Variability of Snow Water Equivalent – The Case Study from the Research Site in Khibiny Mountains, Russia

Journal of Hydrology and Hydromechanics ◽

10.2478/johh-2018-0016 ◽

2019 ◽

Vol 67 (1) ◽

pp. 110-112 ◽

Cited By ~ 2

Author(s):

Anton Yu. Komarov ◽

Yury G. Seliverstov ◽

Pavel B. Grebennikov ◽

Sergey A. Sokratov

Keyword(s):

Spatial Variability ◽

Snow Cover ◽

Snow Water Equivalent ◽

Snow Density ◽

Hydrological Characteristic ◽

Snow Water ◽

Exact Position ◽

Seasonal Snow Cover ◽

Uniform Area

Abstract The aim of the investigation was assessment of spatial variability of the characteristics of snowpack, including the snow water equivalent (SWE) as the main hydrological characteristic of a seasonal snow cover. The study was performed in Khibiny Mountains (Russia), where snow density and snow cover stratigraphy were documented with the help of the SnowMicropen measurements, allowing to determine the exact position of the snow layers’ boundaries with accuracy of 0.1 cm. The study site was located at the geomorphologically and topographically uniform area with uniform vegetation cover. The measurement was conducted at maximum seasonal SWE on 27 March 2016. Twenty vertical profiles were measured along the 10 m long transect. Vertical resolution depended on the thickness of individual layers and was not less than 10 cm. The spatial variation of the measured snowpack characteristics was substantial even within such a homogeneous landscape. Bulk snow density variability was similar to the variability in snow height. The total variation of the snowpack SWE values along the transect was about 20%, which is more than the variability in snow height or snow density, and should be taken into account in analysis of the results of normally performed in operational hydrology snow course SWE estimations by snow tubes.

Download Full-text

Effect of snow microstructure variability on Ku-band radar snow water equivalent retrievals

The Cryosphere ◽

10.5194/tc-13-3045-2019 ◽

2019 ◽

Vol 13 (11) ◽

pp. 3045-3059 ◽

Cited By ~ 3

Author(s):

Nick Rutter ◽

Melody J. Sandells ◽

Chris Derksen ◽

Joshua King ◽

Peter Toose ◽

...

Keyword(s):

Spatial Variability ◽

Layer Thickness ◽

Snow Water Equivalent ◽

Estimation Accuracy ◽

Snow Layer ◽

Data Set ◽

Snow Water ◽

Retrieval Errors ◽

Snow Microstructure ◽

The Impact

Abstract. Spatial variability in snowpack properties negatively impacts our capacity to make direct measurements of snow water equivalent (SWE) using satellites. A comprehensive data set of snow microstructure (94 profiles at 36 sites) and snow layer thickness (9000 vertical profiles across nine trenches) collected over two winters at Trail Valley Creek, NWT, Canada, was applied in synthetic radiative transfer experiments. This allowed for robust assessment of the impact of estimation accuracy of unknown snow microstructural characteristics on the viability of SWE retrievals. Depth hoar layer thickness varied over the shortest horizontal distances, controlled by subnivean vegetation and topography, while variability in total snowpack thickness approximated that of wind slab layers. Mean horizontal correlation lengths of layer thickness were less than a metre for all layers. Depth hoar was consistently ∼30 % of total depth, and with increasing total depth the proportion of wind slab increased at the expense of the decreasing surface snow layer. Distinct differences were evident between distributions of layer properties; a single median value represented density and specific surface area (SSA) of each layer well. Spatial variability in microstructure of depth hoar layers dominated SWE retrieval errors. A depth hoar SSA estimate of around 7 % under the median value was needed to accurately retrieve SWE. In shallow snowpacks <0.6 m, depth hoar SSA estimates of ±5 %–10 % around the optimal retrieval SSA allowed SWE retrievals within a tolerance of ±30 mm. Where snowpacks were deeper than ∼30 cm, accurate values of representative SSA for depth hoar became critical as retrieval errors were exceeded if the median depth hoar SSA was applied.

Download Full-text

Estimating snow water equivalent over long mountain transects using snowmobile-mounted ground-penetrating radar

Geophysics ◽

10.1190/geo2015-0121.1 ◽

2016 ◽

Vol 81 (1) ◽

pp. WA183-WA193 ◽

Cited By ~ 9

Author(s):

W. Steven Holbrook ◽

Scott N. Miller ◽

Matthew A. Provart

Keyword(s):

Ground Penetrating Radar ◽

Snow Water Equivalent ◽

Ground Surface ◽

Snow Accumulation ◽

Accurate Estimation ◽

Snow Density ◽

Snow Stratigraphy ◽

Flood Estimation ◽

Snow Water ◽

Ground Penetrating

The water balance in alpine watersheds is dominated by snowmelt, which provides infiltration, recharges aquifers, controls peak runoff, and is responsible for most of the annual water flow downstream. Accurate estimation of snow water equivalent (SWE) is necessary for runoff and flood estimation, but acquiring enough measurements is challenging due to the variability of snow accumulation, ablation, and redistribution at a range of scales in mountainous terrain. We have developed a method for imaging snow stratigraphy and estimating SWE over large distances from a ground-penetrating radar (GPR) system mounted on a snowmobile. We mounted commercial GPR systems (500 and 800 MHz) to the front of the snowmobile to provide maximum mobility and ensure that measurements were taken on pristine snow. Images showed detailed snow stratigraphy down to the ground surface over snow depths up to at least 8 m, enabling the elucidation of snow accumulation and redistribution processes. We estimated snow density (and thus SWE, assuming no liquid water) by measuring radar velocity of the snowpack through migration focusing analysis. Results from the Medicine Bow Mountains of southeast Wyoming showed that estimates of snow density from GPR ([Formula: see text]) were in good agreement with those from coincident snow cores ([Formula: see text]). Using this method, snow thickness, snow density, and SWE can be measured over large areas solely from rapidly acquired common-offset GPR profiles, without the need for common-midpoint acquisition or snow cores.

Download Full-text

Spatial variability of snow water equivalent in a mountainous area of the Japanese Central Alps

Journal of Geophysical Research Atmospheres ◽

10.1029/2006jf000711 ◽

2008 ◽

Vol 113 (F3) ◽

Cited By ~ 2

Author(s):

Motoki Tanaka ◽

Keisuke Suzuki

Keyword(s):

Spatial Variability ◽

Snow Water Equivalent ◽

Mountainous Area ◽

Central Alps ◽

Snow Water

Download Full-text

Improved Northern Hemisphere Snow Water Equivalent product from passive microwave remote sensing and in situ data

10.5194/egusphere-egu21-1325 ◽

2021 ◽

Author(s):

Colleen Mortimer ◽

Lawrence Mudryk ◽

Chris Derksen ◽

Kari Luojus ◽

Pinja Venalainen ◽

...

Keyword(s):

Spatial Resolution ◽

Snow Depth ◽

Snow Water Equivalent ◽

Microwave Remote Sensing ◽

Passive Microwave ◽

Snow Density ◽

Snow Season ◽

Snow Water ◽

Snow Mass

The European Space Agency Snow CCI+ project provides global homogenized long time series of daily snow extent and snow water equivalent (SWE). The Snow CCI SWE product is built on the Finish Meteorological Institute's GlobSnow algorithm, which combines passive microwave data with in situ snow depth information to estimate SWE. The CCI SWE product improves upon previous versions of GlobSnow through targeted changes to the spatial resolution, ancillary data, and snow density parameterization.Previous GlobSnow SWE products used a constant snow density of 0.24 kg m-3 to convert snow depth to SWE. The CCI SWE product applies spatially and temporally varying density fields, derived by krigging in situ snow density information from historical snow transects to correct biases in estimated SWE. Grid spacing was improved from 25 km to 12.5 km by applying an enhanced spatial resolution microwave brightness temperature dataset. We assess step-wise how each of these targeted changes acts to improve or worsen the product by evaluating with snow transect measurements and comparing hemispheric snow mass and trend differences.Together, when compared to GlobSnow v3, these changes improved RMSE by ~5 cm and correlation by ~0.1 against a suite of snow transect measurements from Canada, Finland, and Russia. Although the hemispheric snow mass anomalies of CCI SWE and GlobSnow v3 are similar, there are sizeable differences in the climatological SWE, most notably a one month delay in the timing of peak SWE and lower SWE during the accumulation season. These shifts were expected because the variable snow density is lower than the former fixed value of 0.24 kg m-3 early in the snow season, but then increases over the course of the snow season. We also examine intermediate products to determine the relative improvements attributable solely to the increased spatial resolution versus changes due to the snow density parameterizations. Such systematic evaluations are critical to directing future product development.

Download Full-text

The effect of spatial variability on the sensitivity of passive microwave measurements to snow water equivalent

Remote Sensing of Environment ◽

10.1016/j.rse.2013.05.002 ◽

2013 ◽

Vol 136 ◽

pp. 163-179 ◽

Cited By ~ 37

Author(s):

Benjamin J. Vander Jagt ◽

Michael T. Durand ◽

Steven A. Margulis ◽

Edward J. Kim ◽

Noah P. Molotch

Keyword(s):

Spatial Variability ◽

Snow Water Equivalent ◽

Passive Microwave ◽

Microwave Measurements ◽

Snow Water

Download Full-text

Spatial Variability in Seasonal Snowpack Trends across the Rio Grande Headwaters (1984–2017)

Journal of Hydrometeorology ◽

10.1175/jhm-d-20-0077.1 ◽

2020 ◽

Vol 21 (11) ◽

pp. 2713-2733 ◽

Cited By ~ 1

Author(s):

Graham A. Sexstone ◽

Colin A. Penn ◽

Glen E. Liston ◽

Kelly E. Gleason ◽

C. David Moeser ◽

...

Keyword(s):

Spatial Variability ◽

Forest Canopy ◽

Snow Water Equivalent ◽

Rio Grande ◽

Winter Precipitation ◽

Time Step ◽

The North ◽

Spatial Coverage ◽

Snow Water ◽

Snowpack Properties

AbstractThis study evaluated the spatial variability of trends in simulated snowpack properties across the Rio Grande headwaters of Colorado using the SnowModel snow evolution modeling system. SnowModel simulations were performed using a grid resolution of 100 m and 3-hourly time step over a 34-yr period (1984–2017). Atmospheric forcing was provided by phase 2 of the North American Land Data Assimilation System, and the simulations accounted for temporal changes in forest canopy from bark beetle and wildfire disturbances. Annual summary values of simulated snowpack properties [snow metrics; e.g., peak snow water equivalent (SWE), snowmelt rate and timing, and snow sublimation] were used to compute trends across the domain. Trends in simulated snow metrics varied depending on elevation, aspect, and land cover. Statistically significant trends did not occur evenly within the basin, and some areas were more sensitive than others. In addition, there were distinct trend differences between the different snow metrics. Upward trends in mean winter air temperature were 0.3°C decade−1, and downward trends in winter precipitation were −52 mm decade−1. Middle elevation zones, coincident with the greatest volumetric snow water storage, exhibited the greatest sensitivity to changes in peak SWE and snowmelt rate. Across the Rio Grande headwaters, snowmelt rates decreased by 20% decade−1, peak SWE decreased by 14% decade−1, and total snowmelt quantity decreased by 13% decade−1. These snow trends are in general agreement with widespread snow declines that have been reported for this region. This study further quantifies these snow declines and provides trend information for additional snow variables across a greater spatial coverage at finer spatial resolution.

Download Full-text

Spatiotemporal Characteristics of Snowpack Density in the Mountainous Regions of the Western United States

Journal of Hydrometeorology ◽

10.1175/2008jhm981.1 ◽

2008 ◽

Vol 9 (6) ◽

pp. 1416-1426 ◽

Cited By ~ 45

Author(s):

Naoki Mizukami ◽

Sanja Perica

Keyword(s):

United States ◽

Snow Depth ◽

Snow Water Equivalent ◽

Winter Season ◽

Western United States ◽

Densification Rate ◽

Snow Density ◽

Mountainous Regions ◽

Spatiotemporal Characteristics ◽

Snow Water

Abstract Snow density is calculated as a ratio of snow water equivalent to snow depth. Until the late 1990s, there were no continuous simultaneous measurements of snow water equivalent and snow depth covering large areas. Because of that, spatiotemporal characteristics of snowpack density could not be well described. Since then, the Natural Resources Conservation Service (NRCS) has been collecting both types of data daily throughout the winter season at snowpack telemetry (SNOTEL) sites located in the mountainous areas of the western United States. This new dataset provided an opportunity to examine the spatiotemporal characteristics of snowpack density. The analysis of approximately seven years of data showed that at a given location and throughout the winter season, year-to-year snowpack density changes are significantly smaller than corresponding snow depth and snow water equivalent changes. As a result, reliable climatological estimates of snow density could be obtained from relatively short records. Snow density magnitudes and densification rates (i.e., rates at which snow densities change in time) were found to be location dependent. During early and midwinter, the densification rate is correlated with density. Starting in early or mid-March, however, snowpack density increases by approximately 2.0 kg m−3 day−1 regardless of location. Cluster analysis was used to obtain qualitative information on spatial patterns of snowpack density and densification rates. Four clusters were identified, each with a distinct density magnitude and densification rate. The most significant physiographic factor that discriminates between clusters was proximity to a large water body. Within individual mountain ranges, snowpack density characteristics were primarily dependent on elevation.

Download Full-text