Pressure variations on a train – Where is the threshold to railway passenger discomfort?

2013 ◽  
Vol 44 (2) ◽  
pp. 200-209 ◽  
Author(s):  
Sandra Schwanitz ◽  
Martin Wittkowski ◽  
Vinzent Rolny ◽  
Mathias Basner
Keyword(s):  
Railway Passenger ◽  
Passenger Discomfort

UNS A02960

Alloy Digest ◽  
1987 ◽  
Vol 36 (12) ◽  
Keyword(s):  
Heat Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Age Hardening ◽  
Casting Alloy ◽  
Passenger Cars ◽  
Temperature Performance ◽  
Mold Casting ◽  
Railway Passenger ◽  
Hardening Heat Treatment

Abstract UNS No. A02060 is an aluminum-mold casting alloy that responds to an age-hardening heat treatment. It is recommended for applications that require a combination of high tensile properties and good machinability. Among its many uses are fuel pump bodies, aircraft fittings and seat frames for railway passenger cars. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Al-285. Producer or source: Various aluminum companies.

scholarly journals Interactive effects between travel behaviour and COVID-19: a questionnaire study

2021 ◽  
Author(s):  
Jinbao Zhang ◽  
Jaeyoung Lee
Keyword(s):  
Early Stage ◽  
Travel Behaviour ◽  
Interactive Effects ◽  
Factors Affecting ◽  
Individual Level ◽  
Passenger Volume ◽  
Spatial Autoregressive ◽  
Railway Passenger ◽  
The Individual ◽  
And Control

Abstract This study has two main objectives: (i) to analyse the effect of travel characteristics on the spreading of disease, and (ii) to determine the effect of COVID-19 on travel behaviour at the individual level. First, the study analyses the effect of passenger volume and the proportions of different modes of travel on the spread of COVID-19 in the early stage. The developed spatial autoregressive model shows that total passenger volume and proportions of air and railway passenger volumes are positively associated with the cumulative confirmed cases. Second, a questionnaire is analysed to determine changes in travel behaviour after COVID-19. The results indicate that the number of total trips considerably decreased. Public transport usage decreased by 20.5%, while private car usage increased by 6.4%. Then the factors affecting the changes in travel behaviour are analysed by logit models. The findings reveal significant factors, including gender, occupation and travel restriction. It is expected that the findings from this study would be helpful for management and control of traffic during a pandemic.

scholarly journals Fatigue Resistance and Failure Behavior of Penetration and Non-Penetration Laser Welded Lap Joints

2021 ◽  
Vol 34 (1) ◽  
Author(s):  
Xiangzhong Guo ◽  
Wei Liu ◽  
Xiqing Li ◽  
Haowen Shi ◽  
Zhikun Song
Keyword(s):  
Fatigue Resistance ◽  
Failure Modes ◽  
Plate Thickness ◽  
High Stress ◽  
Lap Joints ◽  
Failure Behavior ◽  
Passenger Cars ◽  
Plate Fracture ◽  
The Difference ◽  
Railway Passenger

AbstractPenetration and non-penetration lap laser welding is the joining method for assembling side facade panels of railway passenger cars, while their fatigue performances and the difference between them are not completely understood. In this study, the fatigue resistance and failure behavior of penetration 1.5+0.8-P and non-penetration 0.8+1.5-N laser welded lap joints prepared with 0.8 mm and 1.5 mm cold-rolled 301L plates were investigated. The weld beads showed a solidification microstructure of primary ferrite with good thermal cracking resistance, and their hardness was lower than that of the plates. The 1.5+0.8-P joint exhibited better fatigue resistance to low stress amplitudes, whereas the 0.8+1.5-N joint showed greater resistance to high stress amplitudes. The failure modes of 0.8+1.5-N and 1.5+0.8-P joints were 1.5 mm and 0.8 mm lower lap plate fracture, respectively, and the primary cracks were initiated at welding fusion lines on the lap surface. There were long plastic ribs on the penetration plate fracture, but not on the non-penetration plate fracture. The fatigue resistance stresses in the crack initiation area of the penetration and non-penetration plates calculated based on the mean fatigue limits are 408 MPa and 326 MPa, respectively, which can be used as reference stress for the fatigue design of the laser welded structures. The main reason for the difference in fatigue performance between the two laser welded joints was that the asymmetrical heating in the non-penetration plate thickness resulted in higher residual stress near the welding fusion line.

scholarly journals Using Bus Ticketing Big Data to Investigate the Behaviors of the Population Flow of Chinese Suburban Residents in the Post-COVID-19 Phase

2021 ◽  
Vol 18 (11) ◽  
pp. 6066
Author(s):  
Yanbing Bai ◽  
Lu Sun ◽  
Haoyu Liu ◽  
Chao Xie
Keyword(s):  
Travel Behavior ◽  
Large Scale ◽  
Behavior Patterns ◽  
Population Movements ◽  
Economic Level ◽  
Passenger Travel ◽  
Scale Population ◽  
Travel Behaviors ◽  
Railway Passenger ◽  
And Control

Large-scale population movements can turn local diseases into widespread epidemics. Grasping the characteristic of the population flow in the context of the COVID-19 is of great significance for providing information to epidemiology and formulating scientific and reasonable prevention and control policies. Especially in the post-COVID-19 phase, it is essential to maintain the achievement of the fight against the epidemic. Previous research focuses on flight and railway passenger travel behavior and patterns, but China also has numerous suburban residents with a not-high economic level; investigating their travel behaviors is significant for national stability. However, estimating the impacts of the COVID-19 for suburban residents’ travel behaviors remains challenging because of lacking apposite data. Here we submit bus ticketing data including approximately 26,000,000 records from April 2020–August 2020 for 2705 stations. Our results indicate that Suburban residents in Chinese Southern regions are more likely to travel by bus, and travel frequency is higher. Associated with the economic level, we find that residents in the economically developed region more likely to travel or carry out various social activities. Considering from the perspective of the traveling crowd, we find that men and young people are easier to travel by bus; however, they are exactly the main workforce. The indication of our findings is that suburban residents’ travel behavior is affected profoundly by economy and consistent with the inherent behavior patterns before the COVID-19 outbreak. We use typical regions as verification and it is indeed the case.

scholarly journals An Approach for Real-time Estimation of Railway Passenger Flow

2010 ◽  
Vol 51 (2) ◽  
pp. 82-88 ◽  
Author(s):  
Yoichi SUGIYAMA ◽  
Hiroshi MATSUBARA ◽  
Shuichi MYOJO ◽  
Kazuki TAMURA ◽  
Naoya OZAKI
Keyword(s):  
Real Time ◽  
Time Estimation ◽  
Passenger Flow ◽  
Real Time Estimation ◽  
Railway Passenger
Sign in / Sign up

Export Citation Format

Share Document