scholarly journals Removal of Fe3+ from Ammonium Dihydrogen Phosphate Solution in an Impact-jet Hydraulic Cavitation Extractor

2021 ◽  
pp. 103637
Author(s):  
Yan Cao ◽  
Xiaowei Liu ◽  
Xian'e Ren ◽  
Yongchun Huang
Keyword(s):  
Dihydrogen Phosphate ◽  
Phosphate Solution ◽  
Ammonium Dihydrogen Phosphate ◽  
Impact Jet

Study on Mg2+Removal from Ammonium Dihydrogen Phosphate Solution by Predispersed Solvent Extraction

2009 ◽  
Vol 48 (4) ◽  
pp. 2056-2060 ◽  
Author(s):  
JianHong Luo ◽  
Jun Li ◽  
Yang Jin ◽  
Yi Zhang ◽  
DongSheng Zheng
Keyword(s):  
Solvent Extraction ◽  
Dihydrogen Phosphate ◽  
Phosphate Solution ◽  
Ammonium Dihydrogen Phosphate

scholarly journals Study on Mg2+ removal from ammonium dihydrogen phosphate solution by an emulsion liquid membrane

2014 ◽  
Vol 68 (3) ◽  
pp. 341-346 ◽  
Author(s):  
JianHong Luo ◽  
Jun Li ◽  
Bao Wang
Keyword(s):  
Extraction Efficiency ◽  
Liquid Membrane ◽  
Volume Fraction ◽  
Operating Conditions ◽  
Dihydrogen Phosphate ◽  
Phosphate Solution ◽  
Ammonium Dihydrogen Phosphate ◽  
Emulsion Liquid Membrane ◽  
Internal Phase ◽  
Initial Ph

Mg2+is extracted from ammonium dihydrogen phosphate (NH4H2PO4) solution by an emulsion liquid membrane (ELM) using mono-(2-ethylhexyl) 2-ethylhexyl phosphonate (HEHPEHE)as a carrier, sulfonated liquid polybutadiene (LYF) as a surfactant and kerosene as a solvent. To study the extraction efficiency and advantages of the ELM process in the separation of Mg2+,the effects of various operating conditions on the extraction -HEHPEHE volume fraction, reaction temperature, treat ratio (emulsion phase / external phase), phase ratio (membrane phase / internal phase), agitation speed, extraction time, internal phase concentration, surfactant LYF concentration and initial pH of NH4H2PO4 solution are experimentally investigated and discussed. The results show that Mg2+ in NH4H2PO4 solution can be effectively removed by the ELM process. An extraction efficiency of more than 83.1% is attained at the optimized parameters and superior-grade NH4H2PO4can be obtained by two levels of extraction.

The direct observation of anodic Bi2O3 formed on bismuth in ammonium dihydrogen phosphate solution

1996 ◽  
Vol 38 (3) ◽  
pp. 431-441 ◽  
Author(s):  
K. Shimizu ◽  
K. Kobayashi ◽  
P. Skeldon ◽  
G.E. Thompson ◽  
G.C. Wood
Keyword(s):  
Direct Observation ◽  
Dihydrogen Phosphate ◽  
Phosphate Solution ◽  
Ammonium Dihydrogen Phosphate

scholarly journals Mass transfer process study of Fe(III) extraction from ammonium dihydrogen phosphate solution

2020 ◽  
Vol 85 (8) ◽  
pp. 1055-1065
Author(s):  
Weiqi Li ◽  
Hui Liu ◽  
Jun Li ◽  
Caixia You ◽  
Jianhong Luo ◽  
...  
Keyword(s):  
Phosphoric Acid ◽  
Mass Transfer Process ◽  
Dihydrogen Phosphate ◽  
Phosphate Solution ◽  
Ammonium Dihydrogen Phosphate ◽  
Extraction Mechanism ◽  
Wet Process ◽  
Industrial Grade ◽  
Map Solution ◽  
Kinetics Of

The crystallization of ammonium dihydrogen phosphate (MAP) is largely affected by certain metal ions such as Fe (III), and the influence seems to be pointed at both ends. Therefore, the industrial-grade MAP products can only be obtained by purifying the neutralized MAP solution from wet-process phosphoric acid (WPA). The extraction kinetics of Fe (III) from MAP solution using di-2-ethylhexyl phosphoric acid (D2EHPA) in sulfonated kerosene measured by the Lewis cell. The extraction mechanism is discussed and confirmed on the basis of the dimeric model of D2EHPA in non-polar solution. From the temperature dependence of reaction rate, the value of Ea and Kf are calculated and the extraction regimes are deduced to be mixed controlled with diffusion and chemical reaction for Fe (III). Ultimately, the rate equation for the extraction reaction of Fe (III) with D2EHPA is obtained as follows: Rf = 0.028cFe3+1.2cH2A2 0.81cH+-0.85.

Determination of Impurities in Perampanel Bulk Drugs by High-Performance Liquid Chromatography and Gas Chromatography

2020 ◽  
Vol 16 ◽  
Author(s):  
Yun-Yan Xia ◽  
Qiao-Gen Zou ◽  
Yu-Fei Yang ◽  
Qian Sun ◽  
Cheng-Qun Han
Keyword(s):  
Gas Chromatography ◽  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
High Performance ◽  
Quantitative Detection ◽  
Dihydrogen Phosphate ◽  
Phosphate Solution ◽  
Related Impurities ◽  
Bulk Drug

Background: High-performance liquid chromatography (HPLC) method has been used to detect related impurities of perampanel. However, the detection of impurities is incomplete, and the limits of quantification and detection are high. A sensitive, reliable method is in badly to be developed and applied for impurity detection of perampanel bulk drug. Objective: Methodologies utilising HPLC and gas chromatography (GC) were established and validated for quantitative determination of perampanel and its related impurities (a total of 10 impurities including 2 genotoxic impurities). Methods: The separation was achieved on a Dikma Diamonsil C18 column (250 mm × 4.6 mm, 5 μm) with the mobile phase of 0.01 mol/L potassium dihydrogen phosphate solution (A) and acetonitrile (B) in gradient elution mode. The compound 2-bromopropane was determined on an Agilent DB-624 column (0.32 mm × 30 m, 1.8 μm) by electron capture detector (μ-ECD) with split injection ratio of 1:5 and proper gradient temperature program. Result: Both HPLC and GC methods were established and validated to be sensitive, accurate and robust according to International Council for Harmonization (ICH) guidelines. The methods developed were linear in the selected concentration range (R 2≥0.9944). The average recovery of all impurities was between 92.6% and 103.3%. The possible production mechanism of impurities during the synthesis and degradation processes of perampanel bulk drug was also discussed. Five impurities were analyzed by liquid chromatography–mass spectrometry (LC-MS). Moreover, two of them were simultaneously characterized by LC-MS, IR and NMR. Conclusion: The HPLC and GC methods were developed and optimized, which could be applied for quantitative detection of the impurities, and further stability study of perampanel.

The Effect of Phosphatic Composite on Magnesium Phosphate Cement Performance

2014 ◽  
Vol 809-810 ◽  
pp. 477-484
Author(s):  
Zhao Qing Qi ◽  
Hong Tao Wang ◽  
Jun Liang Dang ◽  
Shi Hao Zhang ◽  
Jian Hua Ding
Keyword(s):  
Setting Time ◽  
Potassium Dihydrogen Phosphate ◽  
Magnesium Phosphate ◽  
Dihydrogen Phosphate ◽  
Ammonium Dihydrogen Phosphate ◽  
Hydrogen Phosphate ◽  
Sodium Dihydrogen Phosphate ◽  
Disodium Hydrogen Phosphate ◽  
Potassium Dihydrogen ◽  
Sodium Dihydrogen

The capacity of 10%, 30%, and 50% ammonium dihydrogen phosphate were replaced with an equal amount of three phosphate (potassium dihydrogen phosphate, sodium dihydrogen phosphate, disodium hydrogen phosphate) respectively. Magnesium phosphate cement was made by phosphate of replaced, which strength, setting time, fluidity, hydration temperature, and the hydration products was researched. The results show that: MPC was made that replaced with the equal amount of three kind of phosphate, which has good mechanical properties. Setting time and fluidity change along with the replacment. Three kind of phosphate replace ammonium dihydrogen phosphate, which change the hydration process of MPC. When ammonium dihydrogen phosphate was replaced by an equal amount of disodium hydrogen phosphate, the temperature of hydration is only 69.4 °C. XRD showed that the diffraction peaks of composite’s magnesium phosphate cement increases.

Growth and Characterization of Ammonium Dihydrogen Phosphate (ADP) Doped with H3BO3 Crystals Grown by Slow Evaporation Method

2016 ◽  
Vol 675-676 ◽  
pp. 573-576 ◽  
Author(s):  
Pratya Thongpanit ◽  
Weerapong Chewpraditkul ◽  
Nakarin Pattanaboonmee
Keyword(s):  
Boric Acid ◽  
Temperature Stability ◽  
Hardness Measurement ◽  
Dihydrogen Phosphate ◽  
Ammonium Dihydrogen Phosphate ◽  
Slow Evaporation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Evaporation Method

Ammonium dihydrogen phosphate (ADP) crystals is very interesting due to its nonlinear optical property. This study investigated on improving of material for academic use by adding boric acid to modify ADP crystals. Slow evaporation method in aqueous solutions of pure ADP and ADP doped with three concentrations of H3BO3 as 0.1, 1.0, 5.0 %wt were studied. The grown crystals were confirmed tetragonal structure by powder X-ray diffraction studies. The FTIR spectrum analysis presented various functional groups of boron in three conditions of doped ADP. TGA study was comfirned the temperature stability at 220 °C for both pure and doped ADP crytals. The machanical stress was analyzed by Vicker’s hardness measurement. The results of this analysis showed boric acid doped 1.0 %wt had superior machanical stress from 10 to 75 grams. ADP doped with boric acid at 1.0 %wt was accepted in all test properties.

Sign in / Sign up

Export Citation Format

Share Document