scholarly journals Quantifying the impact of cropland wind erosion on air quality: A high-resolution modeling case study of an Arizona dust storm

2021 ◽  
pp. 118658
Author(s):  
Janak Raj Joshi
2019 ◽  
Vol 8 (4) ◽  
pp. 42-59 ◽  
Author(s):  
Gwendoline l'Her ◽  
Myriam Servières ◽  
Daniel Siret

Based on a case study in Rennes, the article presents how a group of urban public actors re-uses methods and technology from citizen sciences to raise the urban air quality issue in the public debate. The project gives a group of inhabitants the opportunity to follow air quality training and proceed PM2.5µm measurements. The authors question the impact of the ongoing hybridisation between citizen science and urban public action on participants' commitment. The authors present how the use of PM2.5-sensors during 11 weeks led to a disengagement phenomenon, even if the authors observe a strong participation to workshops. These results come from an interdisciplinary methodology using observations, interviews, and data analyses.


2012 ◽  
Vol 12 (21) ◽  
pp. 10209-10237 ◽  
Author(s):  
K. Wang ◽  
Y. Zhang ◽  
A. Nenes ◽  
C. Fountoukis

Abstract. The US Environmental Protection Agency's (EPA) Community Multiscale Air Quality (CMAQ) modeling system version 4.7 is further developed to enhance its capability in simulating the photochemical cycles in the presence of dust particles. The new model treatments implemented in CMAQ v4.7 in this work include two online dust emission schemes (i.e., the Zender and Westphal schemes), nine dust-related heterogeneous reactions, an updated aerosol inorganic thermodynamic module ISORROPIA II with an explicit treatment of crustal species, and the interface between ISORROPIA II and the new dust treatments. The resulting improved CMAQ (referred to as CMAQ-Dust), offline-coupled with the Weather Research and Forecast model (WRF), is applied to the April 2001 dust storm episode over the trans-Pacific domain to examine the impact of new model treatments and understand associated uncertainties. WRF/CMAQ-Dust produces reasonable spatial distribution of dust emissions and captures the dust outbreak events, with the total dust emissions of ~111 and 223 Tg when using the Zender scheme with an erodible fraction of 0.5 and 1.0, respectively. The model system can reproduce well observed meteorological and chemical concentrations, with significant improvements for suspended particulate matter (PM), PM with aerodynamic diameter of 10 μm, and aerosol optical depth than the default CMAQ v4.7. The sensitivity studies show that the inclusion of crustal species reduces the concentration of PM with aerodynamic diameter of 2.5 μm (PM2.5) over polluted areas. The heterogeneous chemistry occurring on dust particles acts as a sink for some species (e.g., as a lower limit estimate, reducing O3 by up to 3.8 ppb (~9%) and SO2 by up to 0.3 ppb (~27%)) and as a source for some others (e.g., increasing fine-mode SO42− by up to 1.1 μg m−3 (~12%) and PM2.5 by up to 1.4 μg m−3 (~3%)) over the domain. The long-range transport of Asian pollutants can enhance the surface concentrations of gases by up to 3% and aerosol species by up to 20% in the Western US.


2020 ◽  
Vol 12 (24) ◽  
pp. 10549
Author(s):  
Marinella Giunta

The road sector is one of the main sources of air emissions in the atmosphere during both construction and operation. The objective of the present paper is a comprehensive evaluation of the impact on air quality during the two main phases of life cycle of roads. In this case study of a motorway project, the emissions of the primary pollutants, CO, NOx, and PM10 are estimated, and the results showed that (i) CO and NOx pollutants released during both phases are comparable, while the emissions of PM10 are more significant in the construction phase; (ii) 85% of PM10 in construction is due to storage, transit on unpaved road, and crushing; (iii) the portals of the tunnel are the sites where there are higher concentrations of pollutants in operation; and (iv) the CO concentrations estimated by the dispersion model are strongly influenced by the topography.


2011 ◽  
Vol 11 (15) ◽  
pp. 7547-7560 ◽  
Author(s):  
B. Aouizerats ◽  
P. Tulet ◽  
G. Pigeon ◽  
V. Masson ◽  
L. Gomes

Abstract. High resolution simulation of complex aerosol particle evolution and gaseous chemistry over an atmospheric urban area is of great interest for understanding air quality and processes. In this context, the CAPITOUL (Canopy and Aerosol Particle Interactions in the Toulouse Urban Layer) field experiment aims at a better understanding of the interactions between the urban dynamics and the aerosol plumes. During a two-day Intensive Observational Period, a numerical model experiment was set up to reproduce the spatial distribution of specific particle pollutants, from the regional scales and the interactions between different cities, to the local scales with specific turbulent structures. Observations show that local dynamics depends on the day-regime, and may lead to different mesoscale dynamical structures. This study focuses on reproducing these fine scale dynamical structures, and investigate the impact on the aerosol plume dispersion. The 500-m resolution simulation manages to reproduce convective rolls at local scale, which concentrate most of the aerosol particles and can locally affect the pollutant dispersion and air quality.


2014 ◽  
Vol 14 (12) ◽  
pp. 5893-5904 ◽  
Author(s):  
D. Lauwaet ◽  
P. Viaene ◽  
E. Brisson ◽  
N.P.M. van Lipzig ◽  
T. van Noije ◽  
...  

Abstract. Belgium is one of the areas within Europe experiencing the highest levels of air pollution. A high-resolution (3 km) modelling experiment is employed to provide guidance to policymakers about expected air quality changes in the near future (2026–2035). The regional air quality model AURORA (Air quality modelling in Urban Regions using an Optimal Resolution Approach), driven by output from a regional climate model, is used to simulate several 10-year time slices to investigate the impact of climatic changes and different emission scenarios on near-surface O3 concentrations, one of the key indices for air quality. Evaluation of the model against measurements from 34 observation stations shows that the AURORA model is capable of reproducing 10-year mean concentrations, daily cycles and spatial patterns. The results for the Representative Concentration Pathways (RCP)4.5 emission scenario indicate that the mean surface O3 concentrations are expected to increase significantly in the near future due to less O3 titration by reduced NOx emissions. Applying an alternative emission scenario for Europe is found to have only a minor impact on the overall concentrations, which are dominated by the background changes. Climate change alone has a much smaller effect on the near-surface O3 concentrations over Belgium than the projected emission changes. The very high horizontal resolution that is used in this study results in much improved spatial correlations and simulated peak concentrations compared to a standard 25 km simulation. An analysis of the number of peak episodes during summer revealed that the emission reductions in RCP4.5 result in a 25% decrease of these peak episodes.


2012 ◽  
Vol 12 (5) ◽  
pp. 13457-13514 ◽  
Author(s):  
K. Wang ◽  
Y. Zhang ◽  
A. Nenes ◽  
C. Fountoukis

Abstract. The US Environmental Protection Agency (EPA)'s Community Multiscale Air Quality (CMAQ) modeling system version 4.7 is further developed to enhance its capability in simulating the photochemical cycles in the presence of dust particles. The new model treatments implemented in CMAQ v4.7 in this work include two online-dust emission schemes, nine dust-related heterogeneous reactions, an updated aerosol inorganic thermodynamic module ISORROPIA II with an explicit treatment of crustal species, and the interface between ISORROPIA II and the new dust treatments. The resulting improved CMAQ (referred to as CMAQ-Dust), offline-coupled with the Weather Research and Forecast model (WRF), are applied to the April 2001 dust storm episode over the trans-Pacific domain to examine the impact of new model treatments and understand associated uncertainties. WRF/CMAQ-Dust produces reasonable spatial distribution of dust emissions and captures the dust outbreak events, with the total dust emissions of ∼111 and 223 Tg when the erodible fraction is assumed to be 0.5 and 1.0, respectively, for the April 2001 episode. The model system can reproduce well observed meteorological and chemical concentrations, with significant improvements for suspended particulate matter (PM), PM with aerodynamic diameter of 10 μm and aerosol optical depth than default CMAQ v4.7. The sensitivity studies show that the inclusion of crustal species reduces the concentration of PM with aerodynamic diameter of 2.5 μm (PM2.5) over polluted areas. The heterogeneous chemistry occurring on dust particles acts as a sink for some species (e.g., as a lower limit estimate, O3 by up to 3.8 ppb (∼9%) and SO2 by up to 0.3 ppb (∼27%)) and as a source for some others (e.g., fine-mode SO42− by up to 1.1 μg m−3 (∼12%) and PM2.5 by up to 1.4 μg m−3 (∼3%) over the domain. The long-range transport of Asian pollutants can enhance the background concentrations of gases by up to 3% and aerosol species by up to 20% in the US.


2021 ◽  
Author(s):  
Alberto Caldas-Alvarez ◽  
Samiro Khodayar ◽  
Peter Knippertz

Abstract. Heavy precipitation is one of the most devastating weather extremes in the western Mediterranean region. Our capacity to prevent negative impacts from such extreme events requires advancements in numerical weather prediction, data assimilation and new observation techniques. In this paper we investigate the impact of two state-of-the-art data sets with very high resolution, Global Positioning System-Zenith Total Delays (GPS-ZTD) with a 10 min temporal resolution and radiosondes with ~700 levels, on the representation of convective precipitation in nudging experiments. Specifically, we investigate whether the high temporal resolution, quality, and coverage of GPS-ZTDs can outweigh their lack of vertical information or if radiosonde profiles are more valuable despite their scarce coverage and low temporal resolution (24 h to 6 h). The study focuses on the Intensive Observation Period 6 (IOP6) of the Hydrological Cycle in the Mediterranean eXperiment (HyMeX; 24 September 2012). This event is selected due to its severity (100 mm/12 h), the availability of observations for nudging and validation, and the large observation impact found in preliminary sensitivity experiments. We systematically compare simulations performed with the COnsortium for Small scale MOdelling (COSMO) model assimilating GPS, high- and low vertical resolution radiosoundings in model resolutions of 7 km, 2.8 km and 500 m. The results show that the additional GPS and radiosonde observations cannot compensate errors in the model dynamics and physics. In this regard the reference COSMO runs have an atmospheric moisture wet bias prior to precipitation onset but a negative bias in rainfall, indicative of deficiencies in the numerics and physics, unable to convert the moisture excess into sufficient precipitation. Nudging GPS and high-resolution soundings corrects atmospheric humidity, but even further reduces total precipitation. This case study also demonstrates the potential impact of individual observations in highly unstable environments. We show that assimilating a low-resolution sounding from Nimes (southern France) while precipitation is taking place induces a 40 % increase in precipitation during the subsequent three hours. This precipitation increase is brought about by the moistening of the 700  hPa level (7.5 g kg−1) upstream of the main precipitating systems, reducing the entrainment of dry air above the boundary layer. The moist layer was missed by GPS observations and high-resolution soundings alike, pointing to the importance of profile information and timing. However, assimilating GPS was beneficial for simulating the temporal evolution of precipitation. Finally, regarding the scale dependency, no resolution is particularly sensitive to a specific observation type, however the 2.8 km run has overall better scores, possibly as this is the optimally tuned operational version of COSMO. In follow-up experiments the Icosahedral Nonhydrostatic Model (ICON) will be investigated for this case study to assert whether its numerical and physics updates, compared to its predecessor COSMO, are able to improve the quality of the simulations.


Resources ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 15 ◽  
Author(s):  
Marco Ravina ◽  
Deborah Panepinto ◽  
Mariachiara Zanetti

The minimization of negative externalities is a key aspect in the development of a circular and sustainable economic model. At the local scale, especially in urban areas, externalities are generated by the adverse impacts of air pollution on human health. Local air quality policies and plans often lack of considerations and instruments for the quantification and evaluation of external health costs. Support for decision-makers is needed, in particular during the implementation stage of air quality plans. Modelling tools based on the impact pathway approach can provide such support. In this paper, the implementation of health impacts and externalities analysis in air quality planning is evaluated. The state of the art in European member states is reported, considering whether and how health effects have been included in the planning schemes. The air quality plan of the Piemonte region in Italy is then considered. A case study is analyzed to evaluate a plan action, i.e., the development of the district heating system in the city of Turin. The DIATI (Dipartimento di Ingegneria dell’Ambiente, del Territorio e delle Infrastrutture) Dispersion and Externalities Model (DIDEM model) is applied to detect the scenario with the highest external cost reduction. This methodology results are extensible and adaptable to other actions and measures, as well as other local policies in Europe. The use of health externalities should be encouraged and integrated into the present methodology supporting air quality planning. Efforts should be addressed to quantify and minimize the overall uncertainty of the process.


Sign in / Sign up

Export Citation Format

Share Document