scholarly journals Production of high purity H2 through chemical-looping water-gas shift at reforming temperatures – the importance of non-stoichiometric oxygen carriers

2021 ◽  
pp. 130174
Author(s):  
Christopher de Leeuwe ◽  
Wenting Hu ◽  
John Evans ◽  
Moritz von Stosch ◽  
Ian S Metcalfe
Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5324
Author(s):  
Minbeom Lee ◽  
Yikyeom Kim ◽  
Hyun Suk Lim ◽  
Ayeong Jo ◽  
Dohyung Kang ◽  
...  

Reverse water–gas shift chemical looping (RWGS-CL) offers a promising means of converting the greenhouse gas of CO2 to CO because of its relatively low operating temperatures and high CO selectivity without any side product. This paper introduces a core–shell structured oxygen carrier for RWGS-CL. The prepared oxygen carrier consists of a metal oxide core and perovskite shell, which was confirmed by inductively coupled plasma mass spectroscopy (ICP-MS), XPS, and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) measurements. The perovskite-structured shell of the prepared oxygen carrier facilitates the formation and consumption of oxygen defects in the metal oxide core during H2-CO2 redox looping cycles. As a result, amounts of CO produced per unit weight of the core–shell structured oxygen carriers were higher than that of a simple perovskite oxygen carrier. Of the metal oxide cores tested, CeO2, NiO, Co3O4, and Co3O4-NiO, La0.75Sr0.25FeO3-encapsulated Co3O4-NiO was found to be the most promising oxygen carrier for RWGS-CL, because it was most productive in terms of CO production and exhibited long-term stability.


2021 ◽  
Author(s):  
Jun-Ichiro Makiura ◽  
Takuma Higo ◽  
Yutaro Kurosawa ◽  
Kota Murakami ◽  
Shuhei Ogo ◽  
...  

Efficient activation of CO2 at low temperature was achieved by reverse water–gas shift via chemical looping (RWGS-CL) by virtue of fast oxygen ion migration in a Cu–In structured oxide, even at lower temperatures.


2020 ◽  
Vol 4 (2) ◽  
pp. 713-729 ◽  
Author(s):  
Sung Min Kim ◽  
Andac Armutlulu ◽  
Agnieszka M. Kierzkowska ◽  
Davood Hosseini ◽  
Felix Donat ◽  
...  

Bi-functional Ni–hollow CaO stabilized by ALD-grown Al2O3 overcoat for sorption-enhanced water-gas shift reaction producing high purity hydrogen.


Author(s):  
Niall R. McGlashan ◽  
Peter R. N. Childs ◽  
Andrew L. Heyes ◽  
Andrew J. Marquis

A cycle capable of generating both hydrogen and power with “inherent” carbon capture is proposed and evaluated. The cycle uses chemical looping combustion to perform the primary energy release from a hydrocarbon, producing an exhaust of CO. This CO is mixed with steam and converted to H2 and CO2 using the water-gas shift reaction (WGSR). Chemical looping uses two reactions with a recirculating oxygen carrier to oxidize hydrocarbons. The resulting oxidation and reduction stages are preformed in separate reactors—the oxidizer and reducer, respectively, and this partitioning facilitates CO2 capture. In addition, by careful selection of the oxygen carrier, the equilibrium temperature of both redox reactions can be reduced to values below the current industry standard metallurgical limit for gas turbines. This means that the irreversibility associated with the combustion process can be reduced significantly, leading to a system of enhanced overall efficiency. The choice of oxygen carrier also affects the ratio of CO versus CO2 in the reducer’s flue gas, with some metal oxide reduction reactions generating almost pure CO. This last feature is desirable if the maximum H2 production is to be achieved using the WGSR reaction. Process flow diagrams of one possible embodiment using a zinc based oxygen carrier are presented. To generate power, the chemical looping system is operated as part of a gas turbine cycle, combined with a bottoming steam cycle to maximize efficiency. The WGSR supplies heat to the bottoming steam cycle, and also helps to raise the steam necessary to complete the reaction. A mass and energy balance of the chemical looping system, the WGSR reactor, steam bottoming cycle, and balance of plant is presented and discussed. The results of this analysis show that the overall efficiency of the complete cycle is dependent on the operating pressure in the oxidizer, and under optimum conditions exceeds 75%.


2020 ◽  
Author(s):  
Takuma Higo ◽  
Jun-Ichiro Makiura ◽  
Yutaro Kurosawa ◽  
Kota Murakami ◽  
Shuhei Ogo ◽  
...  

Efficient activation of CO<sub>2</sub> at low temperature was achieved by reverse water–gas shift <i>via</i> chemical looping (RWGS‑CL) by virtue of fast oxygen ion migration in Cu–In–structured oxide, even at lower temperatures. Results show that novel Cu–In<sub>2</sub>O<sub>3</sub> structured oxide can show a remarkably higher CO<sub>2</sub> splitting rate than ever reported. Various analyses revealed that RWGS‑CL on Cu–In<sub>2</sub>O<sub>3</sub> is derived from redox between Cu–In<sub>2</sub>O<sub>3</sub> and Cu<i><sub>x</sub></i>In<i><sub>y</sub></i> alloy. Key factors for high CO<sub>2</sub> splitting were fast migration of oxide ions in alloy and the preferential oxidation of the interface of alloy–In<sub>2</sub>O<sub>3</sub> in the bulk of the particles. The findings reported herein can open up new avenues to achieve effective CO<sub>2</sub> conversion at lower temperatures.


2017 ◽  
Vol 17 ◽  
pp. 60-68 ◽  
Author(s):  
Marcus Wenzel ◽  
N.V.R. Aditya Dharanipragada ◽  
Vladimir V. Galvita ◽  
Hilde Poelman ◽  
Guy B. Marin ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document