oxygen ion
Recently Published Documents


TOTAL DOCUMENTS

1476
(FIVE YEARS 190)

H-INDEX

67
(FIVE YEARS 8)

2022 ◽  
Vol 102 ◽  
pp. 174-185
Author(s):  
Junwei Che ◽  
Xiangyang Liu ◽  
Xuezhi Wang ◽  
Quan Zhang ◽  
Erhu Zhang ◽  
...  
Keyword(s):  

Author(s):  
Qiang Yang ◽  
Zeyang Luo ◽  
Pei Zhu ◽  
Yunhe Wei ◽  
Huan Wang ◽  
...  

Abstract In this study, a new oxygen ion conductor electrolyte material with high conductivity was reported. Bi2O3 was co-doped with Gd2O3 and TiO2 by solid-phase synthesis method to obtain Bi1-3xGd2xTixO1.5+δ and Bi0.76Gd0.18-xTixO1.5+δ (TGSB) ceramics. The phase composition, surface morphology and electrical properties of TGSB samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and AC impedance respectively. XRD results show that only 6T12GSB has a single cubic fluorite structure, and impurity phases appear in other samples. The SEM results show that only when the doping concentrations of Gd and Ti are 12 mol.% and 6 mol.% respectively, the particle size is relatively smaller and there are no obvious pores. From the analysis of electrical properties, Gd dopant is helpful to the stability of the Bi2O3 phase than Ti dopant, but not beneficial to higher conductivity. When the doping concentration of Gd is higher than 16 mol.%, it becomes more stable. The conductivity of the 6T12GSB sample is relatively high. The conductivity of the TGSB samples is higher than that of the TLSB samples under the lower temperature condition (< 450 °C), and the electrical performance of Bi2O3-based materials are enhanced especially at low temperature.


2022 ◽  
Vol 334 ◽  
pp. 04014
Author(s):  
Aiman Iqbal ◽  
Pramujo Widiatmoko ◽  
Hary Devianto

Calcia-Stabilized Zirconia (CSZ) is potential as low-cost electrolytes material for Solid oxide fuel cell (SOFC). It is fluorite structure widely known as oxygen ion conductors. Addition of carbonate salt into fluorite-based electrolyte is common to overcome low conductivity of CSZ as well as to decrease sintering temperature. Increase of ionic conductivity in the SOFC electrolyte is also influenced by presence of protons (H+), so it is called mixed-ion electrolytes. In this study, the effect of sintering temperature and carbonate content prepared from mixture of Li2CO3 and Na2CO3 on the relative density, ionic conductivity and microstructure of electrolyte and fuel cell performance was investigated. The sintered CSZ/carbonate samples were examined physically and electrochemically by using SEM, TEM, XRD, and EIS. The unique detail of nanostructure for CSZ/carbonate was investigated by TEM. The XRD is to observed peak associating with CSZ, Li2CO3, and Na2CO3, as well as its crystallinity. Moreover, the electrolyte resistance was measured by EIS so that the proton conductivity and oxygen conductivity of CSZ/carbonate can be calculated. The improvement of low-cost electrolyte material such as CSZ can be realized by providing protons pathway.


Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 114
Author(s):  
Nataliia Tarasova ◽  
Irina Animitsa

In this paper, the review of the new class of ionic conductors was made. For the last several years, the layered perovskites with Ruddlesden-Popper structure AIILnInO4 attracted attention from the point of view of possibility of the realization of ionic transport. The materials based on Ba(Sr)La(Nd)InO4 and the various doped compositions were investigated as oxygen-ion and proton conductors. It was found that doped and undoped layered perovskites BaNdInO4, SrLaInO4, and BaLaInO4 demonstrate mixed hole-ionic nature of conductivity in dry air. Acceptor and donor doping leads to a significant increase (up to ~1.5–2 orders of magnitude) of conductivity. One of the most conductive compositions BaNd0.9Ca0.1InO3.95 demonstrates the conductivity value of 5∙10−4 S/cm at 500 °C under dry air. The proton conductivity is realized under humid air at low (<500 °C) temperatures. The highest values of proton conductivity are attributed to the compositions BaNd0.9Ca0.1InO3.95 and Ba1.1La0.9InO3.95 (7.6∙10−6 and 3.2∙10−6 S/cm correspondingly at the 350 °C under wet air). The proton concentration is not correlated with the concentration of oxygen defects in the structure and it increases with an increase in the unit cell volume. The highest proton conductivity (with 95−98% of proton transport below 400 °C) for the materials based on BaLaInO4 was demonstrated by the compositions with dopant content no more that 0.1 mol. The layered perovskites AIILnInO4 are novel and prospective class of functional materials which can be used in the different electrochemical devices in the near future.


Catalysts ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 1
Author(s):  
Elena Gorbova ◽  
Fotini Tzorbatzoglou ◽  
Costas Molochas ◽  
Dimitris Chloros ◽  
Anatoly Demin ◽  
...  

The rapid development of science, technology, and engineering in the 21st century has offered a remarkable rise in our living standards. However, at the same time, serious environmental issues have emerged, such as acid rain and the greenhouse effect, which are associated with the ever-increasing need for energy consumption, 85% of which comes from fossil fuels combustion. From this combustion process, except for energy, the main greenhouse gases-carbon dioxide and steam-are produced. Moreover, during industrial processes, many hazardous gases are emitted. For this reason, gas-detecting devices, such as electrochemical gas sensors able to analyze the composition of a target atmosphere in real time, are important for further improving our living quality. Such devices can help address environmental issues and inform us about the presence of dangerous gases. Furthermore, as non-renewable energy sources run out, there is a need for energy saving. By analyzing the composition of combustion emissions of automobiles or industries, combustion processes can be optimized. This review deals with electrochemical gas sensors based on solid oxide electrolytes, which are employed for the detection of hazardous gasses at high temperatures and aggressive environments. The fundamentals, the principle of operation, and the configuration of potentiometric, amperometric, combined (amperometric-potentiometric), and mixed-potential gas sensors are presented. Moreover, the results of previous studies on carbon oxides (COx), nitrogen oxides (NOx), hydrogen (H2), oxygen (O2), ammonia (NH3), and humidity (steam) electrochemical sensors are reported and discussed. Emphasis is given to sensors based on oxygen ion and proton-conducting electrolytes.


Author(s):  
Chong Lei ◽  
Michael Simpson ◽  
Anil Virkar

Abstract Among many mixed ionic electronic conductors (MIECs), lanthanum strontium cobalt iron oxide (LSCF) has been proven as a promising material for use as cathode in SOFCs. The ion and electron conduction in LSCF need to be studied separately. To measure the ionic conductivity of LSCF, YSZ disks were applied to block the electronic current, and multilayered samples were made with YSZ disks in series with an LSCF disk. Both AC and DC techniques were used for the measurements. An LSCF(porous)/LSCF(dense)/LSCF(porous) bar-shaped sample was made to measure the electronic conductivity of LSCF. DC technique was utilized for the measurement. Results show that the ionic conductivity of LSCF is much lower than its electronic conductivity. The ionic conductivity of LSCF increases with increasing temperature (600-900°C), and the electronic conductivity decreases with increasing temperature (600-900°C). Measurements were also made on a foil of silver to investigate oxygen transport through it. From this, oxygen ion conductivity through silver was estimated.


Sign in / Sign up

Export Citation Format

Share Document