A grahame triple-layer model unifies mica monovalent ion exchange, zeta potential, and surface forces

2021 ◽  
Vol 288 ◽  
pp. 102335
Author(s):  
Andrew R. Crothers ◽  
Charles Li ◽  
C.J. Radke
2020 ◽  
Vol 108 (9) ◽  
pp. 717-726 ◽  
Author(s):  
Han Guo ◽  
Ying Li ◽  
Huihui Wang ◽  
Ning Zhang ◽  
Alhadi Ishag ◽  
...  

AbstractIn this study, the hierarchical mesoporous carbon (HMC) was synthesized by the hydrothermal method. The batch adsorption experiments showed that HMC exhibited the ultrafast equilibrium fate (80 % U(VI) capture efficiency within 5 min), high UO22+ capture capacity (210 mg/g, pH = 4.5) and well recyclability. The investigations of XPS techniques indicated the oxygen-containing functional groups were responsible for high efficient UO22+ adsorption. The pH-dependent adsorption was simulated by three surface complexation modellings, revealing that UO22+ adsorption on HMC was excellently fitted by triple layer model using two inner-sphere complexes (i. e. SOUO2+ and SOUO2(CO3)35− species) compared to constant capacitance model and diffuse layer model. These findings are crucial for expanding actual applications of HMC towards the removal of radionuclides under environmental cleanup.


Author(s):  
Mirvari Hasanova Mirvari Hasanova

The separation and purification of antibiotics with sorption by ion-exchange materials, as well as their delivery in biological processes by immobilization, are now widely used in biotechnology. There are many scientific studies in the literature on the sorption of antibiotics by polymer-based sorbents and inorganic materials, as well as the study of thermodynamics and kinetics of the process. In the literature, the acquisition of biologically active systems from the sorption of antibiotics by ion-exchange fibers based on various polymers and inorganic substances was carried out. However, the synthesis of selective gels for the effective separation of doxycycline and its delivery in different pH mediums by sorption with biodegradable, biocompatible polysaccharide-containing composites is one of the topical issues. Gel was synthesized from the cross-linking of N,N-diethyl N-methyl derivative of a natural polyaminosaccharide of chitosan by glutaric aldehyde. Also, pH-sensitive hydrogels that can swollen in water were synthesized from the cross-linking of a graft copolymer of cherry source gummiarabic with N-vinylpyrrolidone, as well as synthetic polymer polyacrylic acid with N,N-methylene-bis-acrylamide. The structure of the gels were identified by FTIR and NMR spectroscopy, and the sorption of doxycycline antibiotic from an aqueous solution was investigated. According to the values of zeta potential, the protonation of functional groups in the main macromolecule in an acidic medium leads to a value of zeta potential of 40÷80 mV on the surface of chitosan-based gel and others. Although the chemical structure is different, the isoelectric point is set around pH=6÷8 for all three hydrogels. The dependences of the sorption process on the amount of gels, antibiotic concentration, temperature, and pH medium were studied. The experimental data were analyzed using two adsorption models, Langmuir and Freundlich, with the later system providing the best fit. Doxycycline is adsorbed on the surface of chitosan, gummiarabic and polyacrylic acid based hydrogel composite through by physical interactions. Also, the results of thermodynamic parameters ΔG40 kJ/mol show that the nature of the adsorption process is physical, and spontaneous, too. Keywords: Chitosan, Gummiarabic-arabinogalactane, polyacrylic acid, hydrogel, sorption isoterms, doxycycline, thermodynamica.


2016 ◽  
Vol 56 (1) ◽  
pp. 63-74 ◽  
Author(s):  
Guillermo Puerta-Falla ◽  
Magdalena Balonis ◽  
Gabriel Falzone ◽  
Mathieu Bauchy ◽  
Narayanan Neithalath ◽  
...  

2010 ◽  
Vol 654-656 ◽  
pp. 2467-2470 ◽  
Author(s):  
Akif Kaynak ◽  
Chun Hui Yang ◽  
Abbas Kouzani

Electrochemical synthesis of a tri-layer polypyrrole based actuator optimized for performance was reported. The 0.05 M pyrrole and 0.05 M tetrabutylammonium hexaflurophosphate in propylene carbonate (PC) yielded the optimum performance and stability. The force produced ranged from 0.2 to 0.4mN. Cyclic deflection tests on PC based actuators for 3 hours indicated that the displacement decreased by 60%. PC based actuator had a longer operating time, exceeding 3 hours, compared to acetonitrile based actuators. A triple-layer model of the polymer actuator was developed based on the classic bending beam theory by considering strain electrode material. A tri-layer actuator was fabricated [4, 6], by initially sputter coating a PVDF film with approximately 100nm of gold layer, resulting in a conductive film with a surface resistance of 8-10Ω. The PVDF film was about ~145µm thick had an approximate pore size of 45μm. A solution containing 0.05M distilled pyrrole monomer, 0.05M (TBAPF6) and 1% (w/w) distilled water in PC (propylene carbonate) solution was purged with nitrogen for 15 minutes. The continuity between PPy and PVDF. Results predicted by the model were in good agreement with the experimental data.


Sign in / Sign up

Export Citation Format

Share Document