Mechanical properties of a silty clay subjected to freezing–thawing

2014 ◽  
Vol 98 ◽  
pp. 26-34 ◽  
Author(s):  
Zhen-Dong Cui ◽  
Peng-Peng He ◽  
Wei-Hao Yang
2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Yankai Wu ◽  
Yanbin Li ◽  
Bin Niu

Fiber reinforcement is widely used in construction engineering to improve the mechanical properties of soil because it increases the soil’s strength and improves the soil’s mechanical properties. However, the mechanical properties of fiber-reinforced soils remain controversial. The present study investigated the mechanical properties of silty clay reinforced with discrete, randomly distributed sisal fibers using triaxial shear tests. The sisal fibers were cut to different lengths, randomly mixed with silty clay in varying percentages, and compacted to the maximum dry density at the optimum moisture content. The results indicate that with a fiber length of 10 mm and content of 1.0%, sisal fiber-reinforced silty clay is 20% stronger than nonreinforced silty clay. The fiber-reinforced silty clay exhibited crack fracture and surface shear fracture failure modes, implying that sisal fiber is a good earth reinforcement material with potential applications in civil engineering, dam foundation, roadbed engineering, and ground treatment.


Author(s):  
Wojciech Sas ◽  
Andrzej Głuchowski ◽  
Jarosław Margielski

AbstractEstimation of physical and mechanical properties of cohesive soil stabilized by hydratized lime addition. Process of chemical stabilization of cohesive soils influences its mechanical properties, also in the case of soil cohesion. Road constructions consist of few layers which have various mechanical properties and this creates the need for better understanding the impact of chemical stabilization on soil as a layer of road. For the purposes of this article, tests were carried out in order to establish physical and mechanical properties, especially the penetrating resistance CBR test. The main aim of this paper was to estimate the cohesion of the soil, which was sandy-silty clay stabilized with hydrated lime


2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Yi Fang ◽  
Yuejun Lv ◽  
XingYuan Zhou ◽  
Yanju Peng

Most of the coastal beach zone in the world is rich in wind energy reserves and has great potential for offshore wind power development. However, the sedimentary environment in the coastal area is complex and changeable, and the nature of the foundation soil of offshore wind power platforms is weak and complex, which is quite different from that in the land areas. In order to systematically study the mechanical properties of marine foundation soils, a series of geotechnical tests are carried out on representative undisturbed seabed soils, such as basic laboratory geotechnical tests, bender element tests, undrained triaxial shear tests, and resonance column tests. The test results show that shear wave velocity (Vs) of marine silt and silty clay increases linearly with the buried depth; the stress-strain relationship curves of silty clay and silt present two different modes of development: strain hardening and strain softening, the undrained shear strength (Sd) of the two types of marine soils decreases with the increase of the void ratio (e), and both present a good single correlation. Based on the relationship between Sd and Vs from the laboratory test of disturbed seabed soils, an undrained strength evaluation method of undisturbed seabed soils under the current stratum conditions incorporating in situ shear wave velocity is established. The dynamic shear modulus (G) in the various strain ranges of undisturbed silty clay and silt increases regularly with the buried depth (H). Meanwhile, the maximum dynamic shear modulus (Gmax) linearly increases with the increase of H, whereas the attenuation relationship of G decreases with the increase of H. The prediction method of G based on buried depth is established with high accuracy.


Author(s):  
Wojciech Sas ◽  
Andrzej Głuchowski

Abstract Effects of stabilization with cement on mechanical properties of cohesive soil - sandy- -silty clay. Ground improvement as a result of stabilization with cement has its impact on soft soils such as sandy clay in engineering constructions. Stabilized soils are also used in foundation design, where improvement of mechanical properties is needed. Because of these reasons, knowledge of physical and mechanical properties is needed. The relationship stress - strain of soils stabilized with cement is often unclear and strength characteristics need to be clear. In this paper results of physical and mechanical properties soil stabilized with cement are presented


Sign in / Sign up

Export Citation Format

Share Document