scholarly journals Critical aspects in the handling of reactive silica in cementitious materials: Effectiveness of rice husk ash vs nano-silica in mortar dosage

2019 ◽  
Vol 223 ◽  
pp. 360-367 ◽  
Author(s):  
M. Torres-Carrasco ◽  
J.J. Reinosa ◽  
M.A. de la Rubia ◽  
E. Reyes ◽  
F. Alonso Peralta ◽  
...  
2020 ◽  
Vol 8 (1) ◽  
pp. 149-161 ◽  
Author(s):  
H. K. Tchakouté ◽  
D. E. Tchinda Mabah ◽  
C. Henning Rüscher ◽  
E. Kamseu ◽  
F. Andreola ◽  
...  

Author(s):  
Aikot Pallikkara Shashikala ◽  
Praveen Nagarajan ◽  
Saranya Parathi

Production of Portland cement causes global warming due to the emission of greenhouse gases to the environment. The need for reducing the amount of cement is necessary from sustainability point of view. Alkali activated and geopolymeric binders are used as alternative to cement. Industrial by-products such as fly ash, ground granulated blast furnace slag (GGBS), silica fume, rice husk ash etc. are commonly used for the production of geopolymer concrete. This paper focuses on the development of geopolymer concrete from slag (100% GGBS). Effect of different cementitious materials such as lime, fly ash, metakaolin, rice husk ash, silica fume and dolomite on strength properties of slag (GGBS) based geopolymer concrete are also discussed. It is observed that the addition of dolomite (by-products from rock crushing plants) into slag based geopolymer concrete reduces the setting time, enhances durability and improves rapidly the early age strength of geopolymer concrete. Development of geopolymer concrete with industrial by-products is a solution to the disposal of the industrial wastes. The quick setting concrete thus produced can reduce the cost of construction making it sustainable also.


2016 ◽  
Vol 5 (6) ◽  
pp. 349-369 ◽  
Author(s):  
Naser P. Sharifi ◽  
Hajar Jafferji ◽  
Savannah E. Reynolds ◽  
Madison G. Blanchard ◽  
Aaron R. Sakulich

2021 ◽  
Vol 293 ◽  
pp. 02018
Author(s):  
HAO Tong ◽  
LIU Qian ◽  
Fa-Guang Leng ◽  
Tian-Long Qiao

Rice husk ash is a kind of volcanic ash material with high silicon. This also provides a feasibility for rice husk ash as cement-based auxiliary cementing material. China is rich in rice husk resources, and the rice husk ash is stacked. Using rice husk ash (RHA) instead of traditional cementitious materials can effectively solve the environmental pollution caused by the accumulation of rice husk ash. Domestic and international scholar have added rice husk ash as mineral admixture to concrete, but the utilization rate is very low. In order to increase the added value of rice husk ash, the high silicon property of rice husk ash was used to solidify soil. The application range of solidified soil is wide, the requirements for materials are not high, and the functions are different, which can realize the extensive use of rice husk ash. This paper summarizes the literature on comprehensive utilization of rice husk ash at home and abroad, systematically expounds the physicochemical properties and production process of rice husk ash, introduces the application of rice husk ash in solidified soil, and points out the unsolved problems in this field, which provides a direction for the further development.


2017 ◽  
Vol 2 (3) ◽  
pp. 36 ◽  
Author(s):  
John Kamau ◽  
Ash Ahmed ◽  
Fraser Hyndman ◽  
Paul Hirst ◽  
Joseph Kangwa

Supplementary cementitious materials (SCMs) have been known to improve the properties of fresh and hardened concrete, and at the same time enhance the sustainability of concrete. Rice husk Ash (RHA), is one such material, but has neither been widely studied nor applied in practice. This work investigated the effect of the density of RHA on the workability and compressive strength of fresh and hardened RHA-replaced concrete respectively. Cement was replaced with RHA in concrete by weight (RHA-W) and by volume (RHA-V) at steps of 0%, 5%, 7.5%, 10%, 15%, 20%, 25% and 30%. The 0% replacement was used as the reference point from which performances were measured. Results showed that unlike the characteristic of other established pozzolans, RHA significantly reduced the workability of wet concrete and the rate of compressive strength gain over curing time due to a high water demand that is caused by the increased volume of replaced concrete, which results from its low density. Workability reduced with increased replacement for both RHA-W and RHA-V. Replacements of above 15% were not possible for the RHA-W due to the high water demand. However, replacements of up to 30% were achieved for the RHA-V. RHA-W specimens achieved lower compressive strengths and were observed to gain strength at a lower rate over the 28 to 91-days period of curing compared to RHA-V specimens. This behavior was attributed to the shortage of water that is necessary for the hydration of cement and subsequent pozzolanic reaction, which is the basis of the contribution that is made to the strength and performance of concrete by SCMs. However, the compressive strengths achieved were above the study’s target concrete strength of class C32/40 at 91 days, which is among those classes that are listed as being durable and suitable for structural applications. A conclusion that RHA should supplement cements by volumetric replacement rather than simple substitution by weight was drawn.


2020 ◽  
Vol 32 (8) ◽  
pp. 04020195 ◽  
Author(s):  
Shravan Muthukrishnan ◽  
Harn Wei Kua ◽  
Ling Na Yu ◽  
Jacky K. H. Chung

Sign in / Sign up

Export Citation Format

Share Document