MECHANICAL AND DURABILITY CHARACTERISTICS OF GGBS DOLOMITE GEOPOLYMER CONCRETE

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Aikot Pallikkara Shashikala ◽  
Praveen Nagarajan ◽  
Saranya Parathi
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Setting Time ◽  
Cementitious Materials ◽  
Strength Properties ◽  
Industrial Wastes ◽  
Geopolymer Concrete ◽  
By Products

Production of Portland cement causes global warming due to the emission of greenhouse gases to the environment. The need for reducing the amount of cement is necessary from sustainability point of view. Alkali activated and geopolymeric binders are used as alternative to cement. Industrial by-products such as fly ash, ground granulated blast furnace slag (GGBS), silica fume, rice husk ash etc. are commonly used for the production of geopolymer concrete. This paper focuses on the development of geopolymer concrete from slag (100% GGBS). Effect of different cementitious materials such as lime, fly ash, metakaolin, rice husk ash, silica fume and dolomite on strength properties of slag (GGBS) based geopolymer concrete are also discussed. It is observed that the addition of dolomite (by-products from rock crushing plants) into slag based geopolymer concrete reduces the setting time, enhances durability and improves rapidly the early age strength of geopolymer concrete. Development of geopolymer concrete with industrial by-products is a solution to the disposal of the industrial wastes. The quick setting concrete thus produced can reduce the cost of construction making it sustainable also.

scholarly journals Industrial Wastes in Soil Improvement

2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
G. V. Rama Subbarao ◽  
D. Siddartha ◽  
T. Muralikrishna ◽  
K. S. Sailaja ◽  
T. Sowmya
Keyword(s):  
Fly Ash ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Cost Effective ◽  
Dry Weight ◽  
Soil Improvement ◽  
Geotechnical Properties ◽  
Point Of View ◽  
Industrial Wastes ◽  
Engineering Structures

Soil existing at a particular site may not be appropriate for construction of engineering structures. The present study made an attempt to enhance the geotechnical properties of a soil replaced with industrial wastes having pozzolanic value like rice husk ash (RHA) and fly ash (FA). Soil is replaced with RHA in 2%, 4%, and 6% to dry weight of soil. It is observed that soil replaced with 4% RHA is the optimum for the soil used in this study from geotechnical point of view. To know the influence of fly ash, soil is further replaced with 4% FA along with 4% RHA. It is found that results of soil replacement by both RHA and FA proved to be soil modification and not the improvement. Hence, a cost-effective accelerator like lime is used for further replacing the above soil-4%, RHA-4% FA mix. The optimum lime content is found to be 4%.

scholarly journals Development of a Zero-Cement Binder Using Slag, Fly Ash, and Rice Husk Ash with Chemical Activator

2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
M. R. Karim ◽  
M. F. M. Zain ◽  
M. Jamil ◽  
F. C. Lai
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Setting Time ◽  
Time Flow ◽  
Alumina Gel ◽  
Cement Binder ◽  
Increasing Demand ◽  
Chemical Activator

The increasing demand and consumption of cement have necessitated the use of slag, fly ash, rice husk ash (RHA), and so forth as a supplement of cement in concrete construction. The aim of the study is to develop a zero-cement binder (Z-Cem) using slag, fly ash, and RHA combined with chemical activator. NaOH, Ca(OH)2, and KOH were used in varying weights and molar concentrations. Z-Cem was tested for its consistency, setting time, flow, compressive strength, XRD, SEM, and FTIR. The consistency and setting time of the Z-Cem paste increase with increasing RHA content. The Z-Cem mortar requires more superplasticizer to maintain a constant flow of110±5% compared with OPC. The compressive strength of the Z-Cem mortar is significantly influenced by the amounts, types, and molar concentration of the activators. The Z-Cem mortar achieves a compressive strength of 42–44 MPa at 28 days with 5% NaOH or at 2.5 molar concentrations. The FTIR results reveal that molecules in the Z-Cem mortar have a silica-hydrate (Si-H) bond with sodium or other inorganic metals (i.e., sodium/calcium-silica-hydrate-alumina gel). Therefore, Z-Cem could be developed using the aforementioned materials with the chemical activator.

Development of Geopolymer Mortar from Metakaolin Blended with Agricultural and Industrial Wastes

2018 ◽  
Vol 766 ◽  
pp. 305-310 ◽  
Author(s):  
Chayanee Tippayasam ◽  
Sarochapat Sutikulsombat ◽  
Jamjuree Paramee ◽  
Cristina Leonelli ◽  
Duangrudee Chaysuwan
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Chemical Properties ◽  
Cement Industry ◽  
Industrial Wastes ◽  
Engineering Properties ◽  
Alkali Solutions ◽  
Physical And Chemical

Geopolymer is a greener alternative cement produced from the reaction of pozzolans and strong alkali solutions. Generally, the cement industry is one of largest producers of CO2that caused global warming. For geopolymer mortar usage, Portland cement is not utilized at all. In this research, geopolymer mortars were prepared by mixing metakaolin, various wastes (fly ash, bagasse ash and rice husk ash) varied as 80:20, 50:50 and 20:80, 15M NaOH, Na2SiO3and sand. The influence of various parameters such as metakaolin to ashes ratios and pozzolans to alkali ratios on engineering properties of metakaolin blended wastes geopolymer mortar were studied. Compressive strength tests were carried out on 25 x 25 x 25 mm3cube geopolymer mortar specimens at 7, 14, 21, 28 and 91 air curing days. Physical and chemical properties were also investigated at the same times. The test results revealed that the highest compressive strength was 20% metakaolin - 80% fly ash geopolymer mortar. When the curing times increases, the compressive strength of geopolymer mortar also increases. The mixing of metakaolin and bagasse ash/rice husk ash presented lower compressive strength but higher water absorption and porosity. For FTIR results, Si-O, Al-O and Si-O-Na+were found. Moreover, the geopolymer mortar could easily plastered on the wall.

scholarly journals UTILIZATION OF CONVENTIONAL AND NON-CONVENTIONAL ORGANIC SOURCES AND INDUSTRIAL BY-PRODUCTS FOR YIELD MAXIMIZATION OF BRINJAL IN COASTAL SOIL

1970 ◽  
pp. 16-18
Author(s):  
D. Venkatakrishnan
Keyword(s):  
Fly Ash ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Yield Attributes ◽  
Municipal Solid Waste Compost ◽  
Post Harvest ◽  
Lignite Fly Ash ◽  
By Products

This study was conducted to evaluate the response of brinjal (Solanum melongena L.) with conventional, non-conventional organic source, industrial by-products combined with inorganic fertilizers. The treatments imposed were T1 – Control (100% RDF), T2-100% RDF + Municipal Solid Waste Compost @ 5 t ha-1, T3 – 100% RDF + Municipal Solid Waste Compost @ 10 t ha-1, T­4 – 100% RDF + Vermicompost @ 2.5 t ha-1, T5 – 100% RDF + Vermicompost @ 5 t ha-1, T6 – 100% RDF + Rice Husk Ash @ 5 t ha-1, T7 – 100% RDF + Rice Husk Ash @ 10 t ha-1, T8 – 100% RDF + Lignite Fly Ash @ 5 t ha-1, T9 – 100% RDF + Lignite Fly Ash @ 10 t ha-1. There were nine treatments combinations replicated thrice in CRD. The soil was sandy in texture with available nitrogen, phosphorus and potassium of 257, 10.2 and 117 kg ha-1 respectively which fell in fertility status of low. The soil classified taxonomically as Typic Udisamments. The results showed that application of 100% RDF + Vermicompost @ 5 t ha-1 (T5) significantly increased yield attributes viz., fruit length (16.6 cm), fruit girth (15.2 cm), no. of fruits plant-1 (20.67), fruit weight (45.2 g) and fruit yield plant-1 (934.2 g plant-1). This treatment registered maximum quality attributes like ascorbic acid content (4.5 mg 100 g-1), crude protein (4.81%), drymatter of fruit (70.2 g plant-1) and dry matter of plant (81.3 g plant-1). The post harvest soil available N (148mgkg-1) and P (7.15mgkg-1)status was higher due to application of 100% RDF with Vermicompst @ 5 t ha-1 (T5).  The post harvest available K (75.58mgkg-1) status recorded higher in the treatment T9 which received 100% RDF with Lignite Fly Ash @ 10 t ha-1 (T9).

Properties of slag geopolymer concrete modified with fly ash and silica fume

2021 ◽  
Author(s):  
Hafez Elsayed Elyamany ◽  
Abd Elmoaty Mohamed Abd Elmoaty ◽  
Abdul Rahman Ahmed Diab
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Fly Ash ◽  
Silica Fume ◽  
Setting Time ◽  
Splitting Tensile Strength ◽  
Geopolymer Concrete ◽  
Initial Setting Time ◽  
Initial Setting ◽  
Additional Water

This research focused on the role of fly ash and silica fume on slag geopolymer concrete through investigating workability (slump, and slump loss), initial setting time, final setting time, and mechanical properties of slag geopolymer concrete, S-GPC, (compressive strength, splitting tensile strength, modulus of elasticity) in addition to SEM (Scanning electron microscope), and X-Ray analysis. The considered variables included, fly ash (FA) content as a replacement of ground granulated blast furnace slag (GS) (0, 10, 20, 30, and 40 %), presence of silica fume (SF) as a replacement of slag, concentration of sodium hydroxide, NaOH, (molarity: 10M, 16M, and 18M), additional water content (7.5,11,14, and 20 %), and curing type (thermal, air, and water curing). S-GPC yielded rapid stiffening and high slump loss with high mechanical properties. The use of silica fume or fly ash or a mix of them enhanced workability, decreased rate of slump loss, and delayed setting time. ACI 318 equation over estimates splitting tensile strength of FS-GPC.

scholarly journals Use of Rice Husk Ash (RHA) as a Supplementary Cementitious Material in Producing Normal Concrete

2019 ◽  
Vol 271 ◽  
pp. 07007
Author(s):  
Kazi islam ◽  
Zahid Hossain
Keyword(s):  
Rice Husk ◽  
Rice Husk Ash ◽  
Construction Material ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Hardened Concrete ◽  
Type I ◽  
Continuous Increase ◽  
Material Sources ◽  
By Products

With the continuous increase of scarcity of the natural construction material sources and environmental awareness, utilization of wastes/by-products in the construction industry has become an attractive field of study. Several industrial by-products produced from different manufacturing processes have been considered for various usages in the construction field. This paper briefly describes the potential use of Rice Husk Ash (RHA) as Supplementary Cementitious Materials (SCM). Here, three different grades of RHA (600-RHA, 150-RHA, and 44-RHA) in two different percentages (10 % and 20 %) of replacement of Type I Ordinary Portland Cement (OPC) were investigated. Laboratory tests on the fresh concrete mix as well as the mechanical properties of the hardened concrete were performed. It was observed that coarser RHA-modified concrete (600-RHA and 150-RHA) showed reduced strength properties while finer RHA (44-RHA) exhibited improved concrete properties. Moreover, the incorporation of RHA in concrete was found to be effective in mitigating alkaline expansion.

The Properties of Nanocarbontubes Cement Mortar Incorporating Mineral Additives

2014 ◽  
Vol 875-877 ◽  
pp. 383-387 ◽  
Author(s):  
Teuku Ferdiansyah ◽  
Hashim Abdul Razak
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Silica Fume ◽  
Rice Husk ◽  
Electrical Resistance ◽  
Rice Husk Ash ◽  
Cement Mortar ◽  
Cement Content ◽  
Cement Ratio ◽  
Mineral Additives

The purpose of this paper is to discuss the influence of mineral additives i.e. metakaolin, silica fume, rice ash and fly ash incorporating with nanocarbontubes mortar composites. The effects on compressive strength at 28 days were also discussed and presented. Cement content of 500 kg/m3, water/cement ratio of 0.6 and aggregate/cement ratio of 2.75 were adopted for the mix propotion. 1%, 3% and 5% of nanocarbontubes in mortar were combined with 15% of mineral additives. The results show that mixtures of nanocarbontubes with 15% of metakaolin produce better strength compared to normal mortar. Meanwhile with addition of fly ash and rice husk ash the strength were decreased. The electrical resistance for all mixes at 28 days were also discussed and presented. The higher percentages of nanocarbon with addition of all mineral additives resulted in lower electrical resistance properties

Sign in / Sign up

Export Citation Format

Share Document