scholarly journals Mechanical performance, water and chloride permeability of hybrid steel-polypropylene fiber-reinforced recycled aggregate concrete

Author(s):  
Mohamed Hechmi El Ouni ◽  
Syed Haroon Ali Shah ◽  
Asif Ali ◽  
Shoaib Muhammad ◽  
Muhammad Sarmad Mahmood ◽  
...  
Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 2004 ◽  
Author(s):  
Chonggang Zhou ◽  
Xingwang Pei ◽  
Wenlong Li ◽  
Yijun Liu

In this study, recycled aggregate concrete (RAC) modified with polypropylene fiber (PP) and air-entraining agent (AGA) was prepared, and the effects of PP and AGA on the static (compressive strength, Young’s modulus, and splitting tensile strength) and dynamic properties (dynamic modulus of elasticity and damping ratio) of RAC were investigated. The experimental results showed that the addition of an AGA and PP had a favorable effect on the damping ratio of the concrete, however, the addition of the AGA had a slightly negative effect on the mechanical performance of the concrete. The AGA and PP contents required to achieve the optimum damping ratio of the concrete with the least reduction in the mechanical performance were 0.02% and 0.10%, respectively. Furthermore, the addition of AGA was more effective than that of PP in improving the damping property of the concrete.


Materials ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1196 ◽  
Author(s):  
Xiaoxin Wu ◽  
Jinghai Zhou ◽  
Tianbei Kang ◽  
Fengchi Wang ◽  
Xiangqun Ding ◽  
...  

This paper aims to study the effectiveness of adding waste polypropylene fibers into recycled aggregate concrete (RAC) on shrinkage cracking. The influences of fiber properties (length and content) on the shrinkage performance of RAC are investigated. Firstly, through the plat-ring-type shrinkage test and free shrinkage test, both of the early age and long-term shrinkage performance of waste fiber recycled concrete (WFRC) were measured. Then, X-ray industrial computed tomography (ICT) was carried out to reflect the internal porosity changes of RAC with different lengths and contents of fibers. Furthermore, the compressive strength and flexural strength tests are conducted to evaluate the mechanical performance. The test results indicated that the addition of waste fibers played an important role in improving the crack resistance performance of the investigated RAC specimens as well as controlling their shrinkage behaviour. The initial cracking time, amount and width of cracks and shrinkage rate of fiber-reinforced specimens were better than those of the non-fiber-reinforced specimen. The addition of waste fibers at a small volume fraction in recycled concrete had not obviously changed the porosity, but it changed the law of pore size distribution. Meanwhile, the addition of waste fibers had no significant effect on the compressive strength of RAC, but it enhanced the flexural strength by 43%. The specimens reinforced by 19-mm and 0.12% (volume fraction) waste fibers had the optimal performance of cracking resistance.


Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1508
Author(s):  
Ali Raza ◽  
Ahmad Rashedi ◽  
Umer Rafique ◽  
Nazia Hossain ◽  
Banjo Akinyemi ◽  
...  

Structural members comprising geopolymer recycled aggregate concrete (RAC) reinforced with glass fiber-reinforced polymer (GFRP) bars have not been investigated appropriately for axial compressive loading cases. The present study addresses this knowledge gap by evaluating the structural efficiency of GFRP-reinforced geopolymer recycled aggregate concrete (GGRAC)-based members subjected to axial compressive loading. A total of nine compressive members (250 mm in cross-section and 1150 mm in height) were constructed to examine the effect of the number of longitudinal GFRP bars and the vertical spacing of transverse GFRP hoops/ties. The experimental results portrayed that the ductility of GGRAC compressive members improved with the reduction in the pitch of GFRP hoops. The axial load-carrying capacity (LCC) of GGRAC compressive members increased by increasing the number of GFRP bars up to eight (corresponding to a reinforcement ratio of 2.11%) while it decreased by using ten longitudinal GFRP bars (corresponding to a reinforcement ratio of 2.65%). Additionally, an empirical model was suggested to predict the axial LCC of GGRAC compressive members based on a large amount of experimental data of similar members. The experimental results and related theoretical predictions substantially prove the applicability and accuracy of the proposed model. The proposed column represents a feasible structural member in terms of material availability and environmental sustainability.


2014 ◽  
Vol 46 ◽  
pp. 65-72 ◽  
Author(s):  
Jodilson Amorim Carneiro ◽  
Paulo Roberto Lopes Lima ◽  
Mônica Batista Leite ◽  
Romildo Dias Toledo Filho

Sign in / Sign up

Export Citation Format

Share Document