Magnetic Fe3O4/TiO2/graphene sponge for the adsorption of methylene blue in aqueous solution

2022 ◽  
pp. 108811
Author(s):  
Tusunniyaze Maimaiti ◽  
Ruonan Hu ◽  
Huahui Yuan ◽  
Chengzhuang Liang ◽  
Fangshi Liu ◽  
...  
Author(s):  
Saraa Muwafaq Ibrahim ◽  
Ziad T. Abd Ali

Batch experiments have been studied to remove methylene blue dye (MB) from aqueous solution using modified bentonite. The modified bentonite was synthesized by replacing exchangeable calcium cations in natural bentonite with cationic surfactant cetyl trimethyl ammonium bromide (CTAB). The characteristics of modified bentonite were studied using different analysis such as Scanning electronic microscopy (SEM), Fourier transform infrared spectrometry (FTIR) and surface area. Where SEM shows the natural bentonite has a porous structure, a rough and uneven appearance with scattered and different block structure sizes, while the modified bentonite surface morphology was smooth and supplemented by a limited number of holes. On other hand, (FTIR) analysis that proved NH group aliphatic and aromatic group of MB and silanol group are responsible for the sorption of contaminate. The organic matter peaks at 2848 and 2930 cm-1 in the spectra of modified bentonite which are sharper than those of the natural bentonite were assigned to the CH2 scissor vibration band and the symmetrical CH3 stretching absorption band, respectively, also the 2930 cm-1 peak is assigned to CH stretching band. The batch study was provided the maximum removal efficiency (99.99 % MB) with a sorption capacity of 129.87 mg/g at specified conditions (100 mg/L, 25℃, pH 11 and 250rpm). The sorption isotherm data fitted well with the Freundlich isotherm model. The kinetic studies were revealed that the sorption follows a pseudo-second-order kinetic model which indicates chemisorption between sorbent and sorbate molecules.


2000 ◽  
Vol 65 (9) ◽  
pp. 1394-1402 ◽  
Author(s):  
Ľubica Adamčíková ◽  
Mária Hupková ◽  
Peter Ševčík

Spatial patterns in methylene blue-catalyzed oxidation of fructose at alkaline pH were found in aqueous solution and in gel systems. In a thin liquid layer (thickness >2.4 mm) a mixture of spots and stripes was formed by interaction of a nonlinear reaction and the Rayleigh or Maragoni instabilities. The pattern formation was affected by initial reactant concentrations and by the thickness of the reaction mixture layer. Long-lasting structures were formed in gel systems (polyacrylamide, agar, gelatin). These patterns also arise primarily from hydrodynamic processes.


Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 208
Author(s):  
Ramona B. J. Ihlenburg ◽  
Anne-Catherine Lehnen ◽  
Joachim Koetz ◽  
Andreas Taubert

New cryogels for selective dye removal from aqueous solution were prepared by free radical polymerization from the highly water-soluble crosslinker N,N,N’,N’-tetramethyl-N,N’-bis(2-ethylmethacrylate)-propyl-1,3-diammonium dibromide and the sulfobetaine monomer 2-(N-3-sulfopropyl-N,N-dimethyl ammonium)ethyl methacrylate. The resulting white and opaque cryogels have micrometer sized pores with a smaller substructure. They adsorb methyl orange (MO) but not methylene blue (MB) from aqueous solution. Mixtures of MO and MB can be separated through selective adsorption of the MO to the cryogels while the MB remains in solution. The resulting cryogels are thus candidates for the removal of hazardous organic substances, as exemplified by MO and MB, from water. Clearly, it is possible that the cryogels are also potentially interesting for removal of other compounds such as pharmaceuticals or pesticides, but this must be investigated further.


2021 ◽  
pp. 50655
Author(s):  
Aafia Tehrim ◽  
Min Dai ◽  
Xiange Wu ◽  
Malik Muhammad Umair ◽  
Imran Ali ◽  
...  

2021 ◽  
Vol 232 (6) ◽  
Author(s):  
Shoomaila Latif ◽  
Shamaila Iram ◽  
Muhammad Imran ◽  
Farah Kanwal ◽  
Zafar Iqbal ◽  
...  

RSC Advances ◽  
2014 ◽  
Vol 4 (99) ◽  
pp. 56200-56206 ◽  
Author(s):  
Erik Van Eynde ◽  
Britt Lenaerts ◽  
Tom Tytgat ◽  
Sammy W. Verbruggen ◽  
Birger Hauchecorne ◽  
...  

Material characteristics of cleaned diatom Pinnularia frustules are investigated and evaluated as adsorbents to remove methylene blue from aqueous solution.


2012 ◽  
Vol 518-523 ◽  
pp. 352-355
Author(s):  
Hui Liu ◽  
Hong Liang Li ◽  
Meng Xue Wang ◽  
Jing Jing Sang ◽  
Xiu Song Zhao

Methylene blue (MB) was used as model molecule to investigate the effects of surface properties and solvent pH values on the adsorption and desorption (or release) behaviors of mesoporous SBA-15 materials. It was found that the treatment of SBA-15 with a pH 7.8 aqueous solution can enhance the adsorption rate and capacity in comparison with the pristine SBA-15. The effect of pH values on MB releasing from the weak base treated SBA-15 and the pristine one have been studied and been compared in pH values range from 0.5 to 7.0. Both of them showed a maximum releasing rate at about pH 2 and all of the treated SBA-15 samples showed a higher releasing quantity than the pristine ones. The influence mechanisms of base treatment on the adsorption ability and that of pH values on the releasing properties of SBA-15 samples have been analyzed and been discussed based on the composition, the morphology, the surface area and pore size distribution and adsorption/desorption measurements.


Sign in / Sign up

Export Citation Format

Share Document