Petrophysical Characterization of in Situ Cores after CO2 Injection and Comparison with Batch Experiments of the German Ketzin Pilot site

This paper presents the results of a laboratory experimentation carried out on stone materials in the framework of the CRATI project (Knowledge and Restoration through Advanced Integrated Technologies) aimed at testing new products with consolidating properties by means of an integrated methodological approach. After the preliminary characterization of stone materials collected in the pilot site, the second stage of the activities within the project were focused on the formulation and testing of products for the conservation of the same materials against decay, especially salt crystallization, one of the most aggressive and common degrading processes. The San Domenico Church, located in the old town of Cosenza (Calabria, Southern Italy) has been chosen as the pilot site and for the in situ tests. Several specimens with the same features of the stone materials used in San Domenico church were collected from a historical quarry near the city of Cosenza. These specimens were treated and then artificially degraded by salt crystallization tests in order to evaluate their susceptibility to weathering intensity. Three different consolidating products were used; respectively, two commercial and another one formulated in laboratory: (a) a suspension of nanosilica (Nano Estel®); (b) a suspension of nanolime (CaLoSiL®), and (c) a suspension of nano calcium-hydroxide dispersed in isopropyl alcohol and then mixed with diammonium hydrogen phosphate. A systematic approach, including minero-petrographic, geochemical and physico-mechanical techniques, was applied to evaluate (a) the nature and main features of materials; (b) the efficacy of consolidating treatments, and (c) the resistance of treated stone to the salt crystallization processes. The tested products demonstrated a significant efficiency to consolidate and protect stone material samples, enhancing their resistance to salt crystallization. Thus, such a case history may be useful in order to plan appropriate restoration interventions that consider the interactions between the building stone and the protective/consolidating product.

Download Full-text

Geophysical Monitoring of Small Scale CO2-injection into a Deep Saline Aquifer - the Ketzin Pilot Site

73rd EAGE Conference and Exhibition - Workshops 2011 ◽

10.3997/2214-4609.20144724 ◽

2011 ◽

Author(s):

Stefan Lüth ◽

Cornelia Schmidt-Hattenberger ◽

Jan Henninges ◽

Peter Bergmann ◽

Alexandra Ivanova

Keyword(s):

Co2 Injection ◽

Small Scale ◽

Saline Aquifer ◽

Pilot Site ◽

Geophysical Monitoring ◽

Deep Saline Aquifer ◽

Ketzin Pilot Site

Download Full-text

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100071107 ◽

1973 ◽

Vol 31 ◽

pp. 132-133 ◽

Cited By ~ 1

Author(s):

R. E. Herfert

Keyword(s):

Surface Characterization ◽

Analytical Techniques ◽

X Ray Diffraction ◽

Depth Of Penetration ◽

X Ray ◽

The Past ◽

Transmission Electron ◽

Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Download Full-text

A very rapid in situ Kikuchi technique to determine relative crystal misorientation

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100106211 ◽

1988 ◽

Vol 46 ◽

pp. 830-831

Author(s):

J. I. Bennetch

Keyword(s):

Electron Beam ◽

Analytical Techniques ◽

Superplastic Forming ◽

The Other ◽

Kikuchi Pattern ◽

Kikuchi Line ◽

Line Analysis

In a recent study of the superplastic forming (SPF) behavior of certain Al-Li-X alloys, the relative misorientation between adjacent (sub)grains proved to be an important parameter. It is well established that the most accurate way to determine misorientation across boundaries is by Kikuchi line analysis. However, the SPF study required the characterization of a large number of (sub)grains in each sample to be statistically meaningful, a very time-consuming task even for comparatively rapid Kikuchi analytical techniques.In order to circumvent this problem, an alternate, even more rapid in-situ Kikuchi technique was devised, eliminating the need for the developing of negatives and any subsequent measurements on photographic plates. All that is required is a double tilt low backlash goniometer capable of tilting ± 45° in one axis and ± 30° in the other axis. The procedure is as follows. While viewing the microscope screen, one merely tilts the specimen until a standard recognizable reference Kikuchi pattern is centered, making sure, at the same time, that the focused electron beam remains on the (sub)grain in question.

Download Full-text

Coherent electron nanodiffraction from clean silver nano particles in a UHV STEM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010015112x ◽

1993 ◽

Vol 51 ◽

pp. 1058-1059

Author(s):

J. Liu ◽

M. Pan ◽

G. E. Spinnler

Keyword(s):

Supported Catalysts ◽

Imaging Techniques ◽

Nano Particles ◽

Metal Particles ◽

Shape Structure ◽

Dynamical Simulations ◽

Small Metal Particles ◽

Extract Information

Small metal particles have peculiar chemical and physical properties as compared to bulk materials. They are especially important in catalysis since metal particles are common constituents of supported catalysts. The structural characterization of small particles is of primary importance for the understanding of structure-catalytic activity relationships. The shape and size of metal particles larger than approximately 5 nm in diameter can be determined by several imaging techniques. It is difficult, however, to deduce the shape of smaller metal particles. Coherent electron nanodiffraction (CEND) patterns from nano particles contain information about the particle size, shape, structure and defects etc. As part of an on-going program of STEM characterization of supported catalysts we report some preliminary results of CEND study of Ag nano particles, deposited in situ in a UHV STEM instrument, and compare the experimental results with full dynamical simulations in order to extract information about the shape of Ag nano particles.

Download Full-text