scholarly journals Visualizing building energy demand for building peak energy analysis

2015 ◽  
Vol 91 ◽  
pp. 10-15 ◽  
Author(s):  
I. Yarbrough ◽  
Q. Sun ◽  
D.C. Reeves ◽  
K. Hackman ◽  
R. Bennett ◽  
...  
2021 ◽  
Author(s):  
Yuxuan Chen ◽  
Patrick Phelan

Abstract Due to the technological advancement in smart buildings and the smart grid, there is increasing desire of managing energy demand in buildings to achieve energy efficiency. In this context, building energy prediction has become an essential approach for measuring building energy performance, assessing energy system efficiency, and developing energy management strategies. In this study, two artificial intelligence techniques (i.e., ANN = artificial neural networks and SVR = support vector regression) are examined and used to predict the peak energy demand to estimate the energy usage for an office building on a university campus based on meteorological and historical energy data. Two-year energy and meteorological data are used, with one year for training and the following year for testing. To investigate the seasonal load trend and the prediction capabilities of the two approaches, two experiments are conducted relying on different scales of training data. In total, 10 prediction models are built, with 8 models implemented on seasonal training datasets and 2 models employed using year-round training data. It is observed that a backpropagation neural network (BPNN) performs better than SVR when dealing with more data, leading to stable generalization and low prediction error. When dealing with less data, it is found that there is no dominance of one approach over another.


2018 ◽  
Vol 39 (2) ◽  
pp. 147-160
Author(s):  
Yusuke Arima ◽  
Ryozo Ooka ◽  
Hideki Kikumoto

We proposed a new type of weather year data for building energy simulations named the typical and design weather year, which can be used for estimating both average and peak energy demand for one year of building energy simulation. The typical and design weather year is generated using a quantile mapping method. In this paper, we made the typical and design weather year for three cities, Tokyo, Sapporo, and Kagoshima, representing a wide range of climatic conditions in Japan, and evaluated its performance by conducting building energy simulations targeting prototypical office buildings. We found that the typical and design weather year was more than twice as accurate in estimating average energy demand as the existing typical weather year data. Typical and design weather year can also estimate peak energy demand with high accuracy. Practical application: The cumulative distribution functions of a target weather data set, on which quantile mapping is performed, are modified to consist entirely of parent multi-year weather data. Therefore, typical and design weather years based on quantile mapping are expected to be useful as versatile weather year data representing the various weather characteristics of multi-year conditions. In this study, we found that the typical and design weather year can estimate both average and peak energy demands in building energy simulations. New type of weather year data named the typical and design weather year can be used as both typical and design weather data.


2018 ◽  
Author(s):  
Xiaoqing Chen ◽  
Hailong Li ◽  
Xueqiang Li ◽  
Yabo Wang ◽  
Kai Zhu

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 156
Author(s):  
Paige Wenbin Tien ◽  
Shuangyu Wei ◽  
John Calautit

Because of extensive variations in occupancy patterns around office space environments and their use of electrical equipment, accurate occupants’ behaviour detection is valuable for reducing the building energy demand and carbon emissions. Using the collected occupancy information, building energy management system can automatically adjust the operation of heating, ventilation and air-conditioning (HVAC) systems to meet the actual demands in different conditioned spaces in real-time. Existing and commonly used ‘fixed’ schedules for HVAC systems are not sufficient and cannot adjust based on the dynamic changes in building environments. This study proposes a vision-based occupancy and equipment usage detection method based on deep learning for demand-driven control systems. A model based on region-based convolutional neural network (R-CNN) was developed, trained and deployed to a camera for real-time detection of occupancy activities and equipment usage. Experiments tests within a case study office room suggested an overall accuracy of 97.32% and 80.80%. In order to predict the energy savings that can be attained using the proposed approach, the case study building was simulated. The simulation results revealed that the heat gains could be over or under predicted when using static or fixed profiles. Based on the set conditions, the equipment and occupancy gains were 65.75% and 32.74% lower when using the deep learning approach. Overall, the study showed the capabilities of the proposed approach in detecting and recognising multiple occupants’ activities and equipment usage and providing an alternative to estimate the internal heat emissions.


2016 ◽  
Vol 68 ◽  
pp. 183-193 ◽  
Author(s):  
Hyunjoo Kim ◽  
Zhenhua Shen ◽  
Inhan Kim ◽  
Karam Kim ◽  
Annette Stumpf ◽  
...  

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 574
Author(s):  
Muhammad Hilal Khan ◽  
Azzam Ul Asar ◽  
Nasim Ullah ◽  
Fahad R. Albogamy ◽  
Muhammad Kashif Rafique

Energy consumption in buildings is expected to increase by 40% over the next 20 years. Electricity remains the largest source of energy used by buildings, and the demand for it is growing. Building energy improvement strategies is needed to mitigate the impact of growing energy demand. Introducing a smart energy management system in buildings is an ambitious yet increasingly achievable goal that is gaining momentum across geographic regions and corporate markets in the world due to its potential in saving energy costs consumed by the buildings. This paper presents a Smart Building Energy Management system (SBEMS), which is connected to a bidirectional power network. The smart building has both thermal and electrical power loops. Renewable energy from wind and photo-voltaic, battery storage system, auxiliary boiler, a fuel cell-based combined heat and power system, heat sharing from neighboring buildings, and heat storage tank are among the main components of the smart building. A constraint optimization model has been developed for the proposed SBEMS and the state-of-the-art real coded genetic algorithm is used to solve the optimization problem. The main characteristics of the proposed SBEMS are emphasized through eight simulation cases, taking into account the various configurations of the smart building components. In addition, EV charging is also scheduled and the outcomes are compared to the unscheduled mode of charging which shows that scheduling of Electric Vehicle charging further enhances the cost-effectiveness of smart building operation.


Author(s):  
Nevena S. Lukić ◽  
Ljiljana Đukanovic ◽  
Ana Radivojević

Infiltration has a considerable impact on both, energy efficiency and occupant comfort in buildings. Due to the complexity of the analysis of this phenomenon in buildings, the verification methods are very important for its diagnostics and evaluation. In this paper, the matter of infiltration in buildings is being considered referring to both, calculation models and methods, as well as through current standards and regulations in the EU and Serbia. Different valorization methods are presented and analyzed regarding their characteristics, applicability, and complexity. Finally, preliminary infiltration measurements with a pressurization test, conducted on selected buildings of Belgrade housing stock are presented and compared with values defined by the current regulations in Serbia. Results pointed out current problems and the need for improvements regarding the treatment of infiltration in local regulations and practice.


Sign in / Sign up

Export Citation Format

Share Document