Study on optimal ice storage capacity of ice thermal storage system and its influence factors

2018 ◽  
Vol 164 ◽  
pp. 288-300 ◽  
Author(s):  
Xu Song ◽  
Tong Zhu ◽  
Liuchen Liu ◽  
Zhenjun Cao
2014 ◽  
Vol 580-583 ◽  
pp. 2452-2456
Author(s):  
Yi Liu

The numerical simulation is widely used in study of the ice storage system. The model about melting is established and solved by using enthalpy method. Natural convection of the melted water in the course of melting is studied. Effects on the performance of heat-exchange, caused by variation of velocity of the refrigerant, inner diameter of the tube, initial temperature of the external water and inlet temperature of the refrigerant, are simulated and analyzed. 1. As the increase of cryogen inlet temperature, the influence of natural convention is more and more in the process of melting heat transfer. 2. Under the conditions of the different cryogen velocity, the different diameter of tube and the different initial temperature of ice layer, the effect of natural convention also is different in the process of melting heat transfer.


2011 ◽  
Vol 347-353 ◽  
pp. 2879-2883
Author(s):  
Yi Luo ◽  
Rong Sheng Ma ◽  
Guang Yuan Liu

Tests an ice storage engineering of library in Yangzhou,measures ice storage capacity, power consumption of refrigerators, ice discharging capacity and power consumption of pumps.Calculates and analyzes performance coefficient of the ice storage system and electricity cost per discharged capacity.The results are useful for design and optimal operation of ice storage system.


Author(s):  
Jianlei Niu ◽  
Shuo Zhang

Ice storage is currently the dominant cooling energy storage method. To more effectively utilize natural, renewable cooling sources, such as evaporative cooling and sky-radiative cooling, diurnal storage media operated on daily basis at the temperate range between 10 and 20 °C are the most desirable. In this paper, we presented our experimental investigation of micro-encapsulated paraffin slurry as cooling storage media for building cooling applications. The water slurry of micro-encapsulated N-hexadecane with a melting temperature of 18 °C were cooled to 5 °C and heated to 25 °C cyclically in a storage tank of 230 litre, and it was observed that full latent heat storage can only be realized at 5 °C due to supercooling, and the effective cooling storage capacity at the cooling temperature between 5 and 18 °C are obtained, which can be used to for cooling storage system design with various passive cooling possibilities.


2021 ◽  
Vol 137 ◽  
pp. 110615
Author(s):  
J. Jarvinen ◽  
M. Goldsworthy ◽  
S. White ◽  
P. Pudney ◽  
M. Belusko ◽  
...  

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4675
Author(s):  
Ayat-allah Bouramdane ◽  
Alexis Tantet ◽  
Philippe Drobinski

In this study, we examine how Battery Storage (BES) and Thermal Storage (TES) combined with solar Photovoltaic (PV) and Concentrated Solar Power (CSP) technologies with an increased storage duration and rental cost together with diversification would influence the Moroccan mix and to what extent the variability (i.e., adequacy risk) can be reduced; this is done using recent (2013) cost data and under various penetration scenarios. To do this, we use MERRA-2 climate reanalysis to simulate hourly demand and capacity factors (CFs) of wind, solar PV and CSP without and with increasing storage capabilities—as defined by the CSP Solar Multiple (SM) and PV Inverter Loading Ratio (ILR). We adjust these time series to observations for the four Moroccan electrical zones over the year 2018. Our objective is to maximize the renewable (RE) penetration and minimize the imbalances between RE production and consumption considering three optimization strategies. We analyze mixes along Pareto fronts using the Mean-Variance Portfolio approach—implemented in the E4CLIM model—in which we add a maximum-cost constraint to take into account the different rental costs of wind, PV and CSP. We propose a method to calculate the rental cost of storage and production technologies taking into account the constraints on storage associated with the increase of SM and ILR in the added PV-BES and CSP-TES modules, keeping the mean solar CFs fixed. We perform some load bands-reduction diagnostics to assess the reliability benefits provided by each RE technology. We find that, at low penetrations, the maximum-cost budget is not reached because a small capacity is needed. The higher the ILR for PV, the larger the share of PV in the mix compared to wind and CSP without storage is removed completely. Between PV-BES and CSP-TES, the latter is preferred as it has larger storage capacity and thus stronger impact in reducing the adequacy risk. As additional BES are installed, more than TES, PV-BES is favored. At high penetrations, optimal mixes are impacted by cost, the more so as CSP (resp., PV) with high SM (resp., ILR) are installed. Wind is preferably installed due to its high mean CF compared to cost, followed by either PV-BES or CSP/CSP-TES. Scenarios without or with medium storage capacity favor CSP/CSP-TES, while high storage duration scenarios are dominated by low-cost PV-BES. However, scenarios ignoring the storage cost and constraints provide more weight to PV-BES whatever the penetration level. We also show that significant reduction of RE variability can only be achieved through geographical diversification. Technological complementarity may only help to reduce the variance when PV and CSP are both installed without or with a small amount of storage. However, the diversification effect is slightly smaller when the SM and ILR are increased and the covariances are reduced as well since mixes become less diversified.


Electronics ◽  
2018 ◽  
Vol 8 (1) ◽  
pp. 9
Author(s):  
Yinghao Ma ◽  
Hejun Yang ◽  
Dabo Zhang ◽  
Qianyu Ni

The growing penetration of wind power in a power system brings great challenges to system operation flexibility. For generation planning in presence of high wind power penetration, it is essential to take the operation flexibility of the system into account. Firstly, this paper developed the system operation flexibility metrics through considering the flexibility contribution of thermal generating units (TGUs) by operational state transition. Secondly, a planning model for the bundled wind-thermal-storage generation system (BWTSGS) that considers the operation flexibility constraints is proposed. The planning model is used to determine the power and energy rating of an energy storage system (ESS) as well as the type and number of TGUs. A daily scheduling simulation model of a BWTSGS is proposed to calculate the operation cost for the planning model and consider the sequential operation characteristics of the BWTSGS. Further, in order to accelerate the computation, a wind power sequential clustering technique based on the discrete Fourier transform (DFT) method is developed for improving the computational efficiency. Case studies have been conducted on a 1000-MW wind farm to demonstrate the validity and effectiveness of the proposed model.


2019 ◽  
Vol 10 (1) ◽  
pp. 852-863 ◽  
Author(s):  
Patrick S. Sauter ◽  
Bharatkumar V. Solanki ◽  
Claudio A. Canizares ◽  
Kankar Bhattacharya ◽  
Soren Hohmann

2013 ◽  
Vol 671-674 ◽  
pp. 2515-2519
Author(s):  
Xue Mei Wang ◽  
Zhen Hai Wang ◽  
Xing Long Wu

This project aims to study the optimal control model of the ice-storage system which is theoretically close to the optimal control and also applicable to actual engineering. Using Energy Plus, the energy consumption simulation software, and the simple solution method of optimal control, researchers can analyze and compare the annual operation costs of the ice-storage air-conditioning system of a project in Beijing under different control strategies. Researchers obtained the power rates of the air-conditioning system in the office building under the conditions of chiller-priority and optimal contro1 throughout the cooling season. Through analysis and comparison, they find that after the implementation of optimal control, the annually saved power bills mainly result from non-design conditions, especially in the transitional seasons.


Sign in / Sign up

Export Citation Format

Share Document