A review on high-temperature thermochemical energy storage based on metal oxides redox cycle

2018 ◽  
Vol 168 ◽  
pp. 421-453 ◽  
Author(s):  
Sike Wu ◽  
Cheng Zhou ◽  
Elham Doroodchi ◽  
Rajesh Nellore ◽  
Behdad Moghtaderi
Keyword(s):  
High Temperature ◽  
Energy Storage ◽  
Metal Oxides ◽  
Redox Cycle

scholarly journals A Moving Bed Reactor for Thermochemical Energy Storage Based on Metal Oxides

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1232 ◽  
Author(s):  
Nicole Carina Preisner ◽  
Marc Linder
Keyword(s):  
High Temperature ◽  
Energy Storage ◽  
Iron Oxide ◽  
Metal Oxide ◽  
Metal Oxides ◽  
Thermal Energy ◽  
High Energy ◽  
Heat Extraction ◽  
Moving Bed ◽  
Oxide Particles

High-temperature thermal energy storage enables concentrated solar power plants to provide base load. Thermochemical energy storage is based on reversible gas–solid reactions and brings along the advantage of potential loss-free energy storage in the form of separated reaction products and possible high energy densities. The redox reaction of metal oxides is able to store thermal energy at elevated temperatures with air providing the gaseous reaction partner. However, due to the high temperature level, it is crucial to extract both the inherent sensible and thermochemical energies of the metal-oxide particles for enhanced system efficiency. So far, experimental research in the field of thermochemical energy storage focused mainly on solar receivers for continuously charging metal oxides. A continuously operated system of energy storage and solar tower decouples the storage capacity from generated power with metal-oxide particles applied as heat transfer medium and energy storage material. Hence, a heat exchanger based on a countercurrent moving bed concept was developed in a kW -scale. The reactor addresses the combined utilization of the reaction enthalpy of the oxidation and the extraction of thermal energy of a manganese–iron-oxide particle flow. A stationary temperature profile of the bulk was achieved with two distinct temperature sections. The oxidation induced a nearly isothermal section with an overall stable off-gas temperature. The oxidation and heat extraction from the manganese–iron oxide resulted in a total energy density of 569 kJ/kg with a thermochemical share of 21.1%.

scholarly journals Electrodeposition of Atmosphere-Sensitive Ternary Sodium Transition Metal Oxide Films for Sodium-Based Electrochemical Energy Storage

2021 ◽  
Author(s):  
Arghya Patra ◽  
Jerome Davis III ◽  
Saran Pidaparthy ◽  
Manohar H. Karigerasi ◽  
Beniamin Zahiri ◽  
...  
Keyword(s):  
High Temperature ◽  
Energy Storage ◽  
Transition Metal ◽  
Metal Oxides ◽  
Transition Metal Oxides ◽  
High Temperature Superconductivity ◽  
Form Factors ◽  
Electrochemical Energy Storage ◽  
Wide Group ◽  
Electrochemical Energy

<p>Layered sodium transition metal oxides constitute an important class of materials with applications including electrochemical energy storage, high temperature superconductivity and electrocatalysis. However, electrodeposition of these compounds, an approach commonly used to grow other oxides, has been elusive due to their atmosphere instability and intrinsic incompatibility with aqueous electrolytes. Through use of a dry molten sodium hydroxide electrolyte, we demonstrate the high throughput electrodeposition of O3 (O’3) and P2 type layered sodium transition metal oxides across multiple transition metal chemistries, and apply these electrodeposits as high areal capacity cathodes in sodium-ion batteries. The electrodeposits are microns thick, polycrystalline, and structurally similar to materials synthesized classically at high temperature. This work enables fabrication of a wide group of previously inaccessible alkali and alkaline earth ion intercalated, higher valent transition group oxides in important thick film form factors.</p>

Parametric Study of High-Temperature Thermochemical Energy Storage Using Manganese-Iron Oxide

2019 ◽  
Author(s):  
Nasser Vahedi ◽  
Alparslan Oztekin
Keyword(s):  
High Temperature ◽  
Energy Storage ◽  
Energy Density ◽  
Metal Oxides ◽  
Manganese Oxide ◽  
Working Fluid ◽  
Enthalpy Of Reaction ◽  
Iron Doped ◽  
Continuous Power ◽  
New Generation

Abstract Continuous power supply in Concentrated Solar Power (CSP) plants can be achieved via integration of efficient, cost-effective and reliable Thermal Energy Storage (TES) system. The new generation of CSPs operates at higher temperatures and requires thermal storage systems with higher energy density at high storage temperature. Thermochemical Energy Storage (TCES) is the available solution which can meet performance requirements of energy density, temperature, and stability. TCES systems apply reversible endothermic/exothermic chemical reaction through which energy is stored as the enthalpy of reaction and released during the reverse mode. Among several available potential reversible chemical reactions, metal oxides, with high reaction temperature and enthalpy of reaction, have remarkable advantages compared to others. They use air both as Heat Transfer Fluid (HTF) and oxidation reactant, which eliminates the need for storage and intermediate heat exchanger integration between HTF and collector working fluid. Using air as HTF has made them perfectly fitted for the new generation of air operated solar collectors. Among several screened available potential metal oxides, cobalt and manganese oxides were selected as best candidates for high-temperature storage. Pure manganese oxide does not meet the cyclic operation requirement, but the iron-doped solid solution has proven reasonable cyclic storage performance. In this study, iron-doped manganese oxide (Fe-Mn 1:3 molar ratio) has been selected as a redox agent for TCES reactor. The cylindrical packed bed configuration is considered as a reactor bed configuration. A two-dimensional axisymmetric numerical model is developed using the finite element method. Performance analysis for both charge and discharge is provided separately. The effect of inflow rate and bed porosity variations on reactor performance in complete storage cycle were studied.

scholarly journals Electrodeposition of Atmosphere-Sensitive Ternary Sodium Transition Metal Oxide Films for Sodium-Based Electrochemical Energy Storage

2021 ◽  
Author(s):  
Arghya Patra ◽  
Jerome Davis III ◽  
Saran Pidaparthy ◽  
Manohar H. Karigerasi ◽  
Beniamin Zahiri ◽  
...  
Keyword(s):  
High Temperature ◽  
Energy Storage ◽  
Transition Metal ◽  
Metal Oxides ◽  
Transition Metal Oxides ◽  
High Temperature Superconductivity ◽  
Form Factors ◽  
Electrochemical Energy Storage ◽  
Wide Group ◽  
Electrochemical Energy

<p>Layered sodium transition metal oxides constitute an important class of materials with applications including electrochemical energy storage, high temperature superconductivity and electrocatalysis. However, electrodeposition of these compounds, an approach commonly used to grow other oxides, has been elusive due to their atmosphere instability and intrinsic incompatibility with aqueous electrolytes. Through use of a dry molten sodium hydroxide electrolyte, we demonstrate the high throughput electrodeposition of O3 (O’3) and P2 type layered sodium transition metal oxides across multiple transition metal chemistries, and apply these electrodeposits as high areal capacity cathodes in sodium-ion batteries. The electrodeposits are microns thick, polycrystalline, and structurally similar to materials synthesized classically at high temperature. This work enables fabrication of a wide group of previously inaccessible alkali and alkaline earth ion intercalated, higher valent transition group oxides in important thick film form factors.</p>

scholarly journals Demonstration of Phase Change Thermal Energy Storage in Zinc Oxide Microencapsulated Sodium Nitrate

2021 ◽  
Vol 11 (13) ◽  
pp. 6234
Author(s):  
Ciprian Neagoe ◽  
Ioan Albert Tudor ◽  
Cristina Florentina Ciobota ◽  
Cristian Bogdanescu ◽  
Paul Stanciu ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Thermal Properties ◽  
High Temperature ◽  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Sodium Nitrate ◽  
Thermal Energy Storage ◽  
Metal Corrosion ◽  
Scanning Calorimetry

Microencapsulation of sodium nitrate (NaNO3) as phase change material for high temperature thermal energy storage aims to reduce costs related to metal corrosion in storage tanks. The goal of this work was to test in a prototype thermal energy storage tank (16.7 L internal volume) the thermal properties of NaNO3 microencapsulated in zinc oxide shells, and estimate the potential of NaNO3–ZnO microcapsules for thermal storage applications. A fast and scalable microencapsulation procedure was developed, a flow calorimetry method was adapted, and a template document created to perform tank thermal transfer simulation by the finite element method (FEM) was set in Microsoft Excel. Differential scanning calorimetry (DSC) and transient plane source (TPS) methods were used to measure, in small samples, the temperature dependency of melting/solidification heat, specific heat, and thermal conductivity of the NaNO3–ZnO microcapsules. Scanning electron microscopy (SEM) and chemical analysis demonstrated the stability of microcapsules over multiple tank charge–discharge cycles. The energy stored as latent heat is available for a temperature interval from 303 to 285 °C, corresponding to onset–offset for NaNO3 solidification. Charge–self-discharge experiments on the pilot tank showed that the amount of thermal energy stored in this interval largely corresponds to the NaNO3 content of the microcapsules; the high temperature energy density of microcapsules is estimated in the range from 145 to 179 MJ/m3. Comparison between real tank experiments and FEM simulations demonstrated that DSC and TPS laboratory measurements on microcapsule thermal properties may reliably be used to design applications for thermal energy storage.

scholarly journals Multidisciplinary Approaches for Assessing a High Temperature Borehole Thermal Energy Storage Facility at Linköping, Sweden

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4379
Author(s):  
Max Hesselbrandt ◽  
Mikael Erlström ◽  
Daniel Sopher ◽  
Jose Acuna
Keyword(s):  
Thermal Properties ◽  
High Temperature ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Thermal Response ◽  
Site Investigation ◽  
Thermal Response Test ◽  
Response Test ◽  
Crystalline Bedrock

Assessing the optimal placement and design of a large-scale high temperature energy storage system in crystalline bedrock is a challenging task. This study applies and evaluates various methods and strategies for pre-site investigation for a potential high temperature borehole thermal energy storage (HT-BTES) system at Linköping in Sweden. The storage is required to shift approximately 70 GWh of excess heat generated from a waste incineration plant during the summer to the winter season. Ideally, the site for the HT-BTES system should be able to accommodate up to 1400 wells to 300 m depth. The presence of major fracture zones, high groundwater flow, anisotropic thermal properties, and thick Quaternary overburden are all factors that play an important role in the performance of an HT-BTES system. Inadequate input data to the modeling and design increases the risk of unsatisfactory performance, unwanted thermal impact on the surroundings, and suboptimal placement of the HT-BTES system, especially in a complex crystalline bedrock setting. Hence, it is crucial that the subsurface geological conditions and associated thermal properties are suitably characterized as part of pre-investigation work. In this study, we utilize a range of methods for pre-site investigation in the greater Distorp area, in the vicinity of Linköping. Ground geophysical methods, including magnetic and Very Low-Frequency (VLF) measurements, are collected across the study area together with outcrop observations and lab analysis on rock samples. Borehole investigations are conducted, including Thermal Response Test (TRT) and Distributed Thermal Response Test (DTRT) measurements, as well as geophysical wireline logging. Drone-based photogrammetry is also applied to characterize the fracture distribution and orientation in outcrops. In the case of the Distorp site, these methods have proven to give useful information to optimize the placement of the HT-BTES system and to inform design and modeling work. Furthermore, many of the methods applied in the study have proven to require only a fraction of the resources required to drill a single well, and hence, can be considered relatively efficient.

Sign in / Sign up

Export Citation Format

Share Document