Proposal and assessment of a novel supercritical CO2 Brayton cycle integrated with LiBr absorption chiller for concentrated solar power applications

Energy ◽  
2018 ◽  
Vol 148 ◽  
pp. 839-854 ◽  
Author(s):  
Yuegeng Ma ◽  
Xuwei Zhang ◽  
Ming Liu ◽  
Junjie Yan ◽  
Jiping Liu
2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Ali Sulaiman Alsagri ◽  
Andrew Chiasson ◽  
Mohamed Gadalla

The aim of this study was to conduct thermodynamic and economic analyses of a concentrated solar power (CSP) plant to drive a supercritical CO2 recompression Brayton cycle. The objectives were to assess the system viability in a location of moderate-to-high-temperature solar availability to sCO2 power block during the day and to investigate the role of thermal energy storage with 4, 8, 12, and 16 h of storage to increase the solar share and the yearly energy generating capacity. A case study of system optimization and evaluation is presented in a city in Saudi Arabia (Riyadh). To achieve the highest energy production per unit cost, the heliostat geometry field design integrated with a sCO2 Brayton cycle with a molten-salt thermal energy storage (TES) dispatch system and the corresponding operating parameters are optimized. A solar power tower (SPT) is a type of CSP system that is of particular interest in this research because it can operate at relatively high temperatures. The present SPT-TES field comprises of heliostat field mirrors, a solar tower, a receiver, heat exchangers, and two molten-salt TES tanks. The main thermoeconomic indicators are the capacity factor and the levelized cost of electricity (LCOE). The research findings indicate that SPT-TES with a supercritical CO2 power cycle is economically viable with 12 h thermal storage using molten salt. The results also show that integrating 12 h-TES with an SPT has a high positive impact on the capacity factor of 60% at the optimum LCOE of $0.1078/kW h.


Author(s):  
Ricardo Vasquez Padilla ◽  
Yen Soo Too ◽  
Andrew Beath ◽  
Robbie McNaughton ◽  
Wes Stein

Concentrated Solar Power using supercritical CO2 (S-CO2) Brayton cycles offers advantages of similar and even higher overall thermal efficiencies compared to conventional Rankine cycles using superheated or supercritical steam. In this paper, a S-CO2 Recompression Brayton cycle is integrated with a central receiver. The effect of pressure drops in heat exchangers and solar receiver surface temperature on the thermal and ex-ergetic performance of the recompression Brayton cycle with and without reheat condition is studied. Energy, exergy and mass balance are carried out for each component and first law and exergy destruction are calculated. In order to obtain optimal operating condition, optimum cycle pressure ratios are obtained by maximising the thermal efficiency. The results showed that under low solar receiver pressure drops and solar receiver temperature approach, the S-CO2 Recompression Brayton cycle has more thermal and exergy efficiencies than the no reheat case. Pressure drop reduces the gap between reheat and no reheat case, and for pressure drops in the solar receiver of 2.5% or higher, reheat has significant impact on thermal and exergy performance of the cycle studied. The overall exergy efficiency showed a bell shaped, reaching a maximum value between 19.5–22.5% at turbine inlet temperatures in the range of 660–755 °C for solar receiver surface temperature approach among 100–200 °C.


Sign in / Sign up

Export Citation Format

Share Document